PVDF Tubing | McMaster-Carr

Search Results

Clear All

	Material Material	Show

Plastic

PVDF Plastic

	Material Material	Hide

	System of Measurement System of Measurement

Inch

Metric

	OD OD

	ID ID

	For Use With For Use With

	Flexibility Flexibility


Flexible	Semi-Flexible

Semi-Rigid	Rigid

	Connection Style Connection Style

Compression

Socket Connect

Threaded

	Maximum Temperature Maximum Temperature

Less than 500° F

	Hardness Rating Hardness Rating

	Clarity Clarity


Clear	Semi-Clear

Opaque

	Maximum Pressure Maximum Pressure

	Color Color

	Clear		White
	Black		Blue
	Red		Green
	Yellow		Gray
	Brown		Green with Yellow Stripe

	Specifications Met Specifications Met

AMS/MIL

ASTM

CSA

FDA Compliant

Flame Rated VW-1

NSF/ANSI

	Length Length

	Bend Radius Bend Radius

	Connection Type Connection Type


Tube	Pipe

	Wall Thickness Wall Thickness

	Sterilize With Sterilize With

Chemicals

Steam (Autoclaving)

Gas

	Maximum Vacuum Maximum Vacuum

28 in. of Hg @ 72° F

Not Rated

	End Type End Type

Without Fittings

	Minimum Temperature Minimum Temperature

-99° to 0° F

Not Rated

	Environment Environment

Food and Beverage

Sanitary

	Vacuum Rating Vacuum Rating

Standard

View catalog pages (7)

Forward

How can we improve?

84 Products

About Heat-Shrink Tubing

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

About Plastic and Rubber Tubing

This durable tubing has the best abrasion and wear resistance of all our hard tubing for chemicals. It can withstand a variety of acids and other harsh substances. Tubing is semi-clear, so you get a limited view inside the line. It is semi-flexible, so it’s good for gradual bends.

PVDF tubing is the most economical option. It is also known as Kynar.

Tubing that meets UL 94V0 is flame retardant, so it delays the spread of flames to valuable equipment.

For technical drawings and 3-D models, click on a part number.

Semi-Clear PVDF Plastic

Semi-Flexible
Compatible with Compression Tube Fittings
Hardness Rating:
Inch: Hard (Durometer 75D)
Metric: Hard (Durometer 65D)
Temperature Range: -40° to 250° F

Inch
ID	OD	Wall Thick.	Bend Radius	Max. Pressure	Color	Lengths, ft.	Specifications Met		Per Ft.
1/8"	1/4"	1/16"	1"	350 psi @ 72° F	White	5, 10, 25, 50	UL 94V0	00000000	00000
11/64"	1/4"	3/64"	1 1/4"	180 psi @ 72° F	White	5, 10, 25, 50	UL 94V0	00000000	0000
3/16"	5/16"	1/16"	1 1/4"	290 psi @ 72° F	White	5, 10, 25, 50	UL 94V0	00000000	0000
1/4"	3/8"	1/16"	1 1/2"	240 psi @ 72° F	White	5, 10, 25, 50	UL 94V0	00000000	0000
5/16"	7/16"	1/16"	1 1/2"	200 psi @ 72° F	White	5, 10, 25, 50	UL 94V0	00000000	0000
3/8"	1/2"	1/16"	1 3/4"	180 psi @ 72° F	White	2, 5, 10, 25, 50	UL 94V0	00000000	0000
1/2"	5/8"	1/16"	2 1/2"	140 psi @ 72° F	White	2, 5, 10, 25, 50	UL 94V0	00000000	0000
5/8"	3/4"	1/16"	3 1/2"	120 psi @ 72° F	White	2, 5, 10, 25, 50	UL 94V0	00000000	0000
3/4"	7/8"	1/16"	5"	100 psi @ 72° F	White	2, 5, 10, 25, 50	UL 94V0	00000000	0000
7/8"	1"	1/16"	7 1/2"	90 psi @ 72° F	White	2, 5, 10, 25, 50	UL 94V0	00000000	0000
Metric
2mm	4mm	1mm	19mm	430 psi @ 72° F	White	10, 25, 50	__	00000000	0000
4mm	6mm	1mm	25mm	210 psi @ 72° F	White	2, 5, 10, 25, 50	__	00000000	0000
6mm	8mm	1mm	50mm	140 psi @ 72° F	White	2, 5, 10, 25, 50	__	00000000	0000
8mm	10mm	1mm	76mm	100 psi @ 72° F	White	2, 5, 10, 25, 50	__	00000000	0000
10mm	12mm	1mm	107mm	85 psi @ 72° F	White	2, 5, 10, 25, 50	__	00000000	0000

Semi-Flexible Hard Plastic Tubing
for Food, Beverage, and Dairy

Semi-Flexible
Compatible with Compression Tube Fittings
Hard (Durometer 60D)
Temperature Range: -40° to 212° F
Specifications Met: FDA Compliant 21 CFR 177.2600, NSF/ANSI 51, NSF/ANSI 61, NSF/ANSI 372

Strong, yet pliable, this PVDF tubing is good for gradual bends and can handle repeated flexing. It is also known as Kynar. Suitable for use with food and beverage, it is made of FDA listed materials and meets NSF/ANSI 51 for food contact. Tubing also meets both NSF/ANSI 61 and NSF/ANSI 372 for use with drinking water systems. Tubing doesn’t contain plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through it. It is semi-clear, so you get a limited view inside the line.

Semi-Clear PVDF Plastic
ID	OD	Wall Thick.	Bend Radius	Max. Pressure	Max. Vacuum	Color	Lengths, ft.		Per Ft.
Inch Tubing
1/8"	1/4"	1/16"	1/2"	260 psi @ 72° F	28 in. of Hg @ 72° F	White	5, 10, 25, 50	0000000	00000
11/64"	1/4"	3/64"	1"	150 psi @ 72° F	28 in. of Hg @ 72° F	White	2, 5, 10, 25, 50	0000000	0000
3/16"	5/16"	1/16"	1"	210 psi @ 72° F	28 in. of Hg @ 72° F	White	2, 5, 10, 25, 50	0000000	0000
1/4"	3/8"	1/16"	1"	170 psi @ 72° F	28 in. of Hg @ 72° F	White	2, 5, 10, 25, 50	0000000	0000
5/16"	7/16"	1/16"	1 3/4"	150 psi @ 72° F	28 in. of Hg @ 72° F	White	2, 5, 10, 25, 50	0000000	0000
3/8"	1/2"	1/16"	2"	130 psi @ 72° F	28 in. of Hg @ 72° F	White	2, 5, 10, 25, 50	0000000	0000
1/2"	5/8"	1/16"	3"	100 psi @ 72° F	28 in. of Hg @ 72° F	White	1, 2, 5, 10, 20, 25, 50	0000000	0000
5/8"	3/4"	1/16"	5"	90 psi @ 72° F	28 in. of Hg @ 72° F	White	1, 2, 5, 10, 20, 25, 50	0000000	0000
3/4"	7/8"	1/16"	15"	70 psi @ 72° F	28 in. of Hg @ 72° F	White	1, 2, 5, 10, 20, 25, 50	0000000	00000
7/8"	1"	1/16"	16"	65 psi @ 72° F	28 in. of Hg @ 72° F	White	1, 2, 5, 10, 20, 25, 50	0000000	00000
Metric Tubing
2mm	4mm	1mm	19mm	460 psi @ 72° F	28 in. of Hg @ 72° F	White	10, 25, 50	0000000	0000
4mm	6mm	1mm	25mm	310 psi @ 72° F	28 in. of Hg @ 72° F	White	5, 10, 25, 50	0000000	0000
6mm	8mm	1mm	38mm	230 psi @ 72° F	28 in. of Hg @ 72° F	White	5, 10, 25, 50	0000000	0000
8mm	10mm	1mm	63mm	260 psi @ 72° F	28 in. of Hg @ 72° F	White	2, 5, 10, 25, 50	0000000	0000
10mm	12mm	1mm	102mm	150 psi @ 72° F	28 in. of Hg @ 72° F	White	2, 5, 10, 25, 50	0000000	0000
12mm	14mm	1mm	127mm	130 psi @ 72° F	28 in. of Hg @ 72° F	White	2, 5, 10, 25, 50	0000000	0000
14mm	16mm	1mm	152mm	115 psi @ 72° F	28 in. of Hg @ 72° F	White	2, 5, 10, 25, 50	0000000	0000

Plastic and Rubber Tubing Material Sample Packs

These packs include individually marked pieces of tubing in a variety of materials.

Includes	Pkg. Qty.		Pkg.
One 3" long piece each of nylon, PTFE, PVDF, and PEEK tubing	4	000000	000000

Flame-Retardant PVDF Pipe
Nipples and Pipe for Chemicals

For Use With: Chlorine, Salt Water, Solvents
Max. Temperature: 280° F
Specifications Met: ASTM D3222, UL 94V0
Fittings: Use Schedule 80 PVDF Plastic
Flanges: Use Class 150 PVDF Plastic

Pipe meets UL 94V0 for flame retardance, so it delays the spread of flames to valuable equipment. It is PVDF (polyvinylidene fluoride), which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances. Also known as Schedule 80 pipe, it has thick walls for heavy duty chemical processing applications. Pipe meets ASTM D3222 specifications and testing requirements for material quality.

Warning: Never use plastic pipe fittings and pipe with compressed air or gas.

For technical drawings and 3-D models, click on a part number.

Threaded on Both Ends

To prevent leaks in threaded connections, apply a non-hardening, plastic-compatible sealant to the male threads. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.

2"
Pipe Size	OD	ID	Wall Thick.	Material	Color	Max. Pressure		Each
NPT Threads
1/2	27/32"	0.546"	0.147"	PVDF Plastic	Red	290 psi @ 72° F	00000000	000000
3/4	1 3/64"	0.742"	0.154"	PVDF Plastic	Red	230 psi @ 72° F	00000000	00000
1	1 5/16"	0.957"	0.179"	PVDF Plastic	Red	210 psi @ 72° F	00000000	00000
1 1/2	1 29/32"	1.5"	0.2"	PVDF Plastic	Red	160 psi @ 72° F	00000000	00000
2	2 3/8"	1.939"	0.218"	PVDF Plastic	Red	140 psi @ 72° F	00000000	00000
4"
NPT Threads
1/2	27/32"	0.546"	0.147"	PVDF Plastic	Red	290 psi @ 72° F	00000000	00000
3/4	1 3/64"	0.742"	0.154"	PVDF Plastic	Red	230 psi @ 72° F	00000000	00000
1	1 5/16"	0.957"	0.179"	PVDF Plastic	Red	210 psi @ 72° F	00000000	00000
1 1/2	1 29/32"	1.5"	0.2"	PVDF Plastic	Red	160 psi @ 72° F	00000000	00000
2	2 3/8"	1.939"	0.218"	PVDF Plastic	Red	140 psi @ 72° F	00000000	00000

Non-Hardening Thread Sealant (8-oz. Brush-Top Can)

000000

Each

000000

Unthreaded

Connect unthreaded pipe to unthreaded female socket-connect fittings using a primer and cement (also known as solvent weld).

2 ft.
Pipe Size	OD	ID	Wall Thick.	Material	Color	Max. Pressure		Each
1/2	27/32"	0.546"	0.147"	PVDF Plastic	Red	290 psi @ 72° F	00000000	000000
3/4	1 3/64"	0.742"	0.154"	PVDF Plastic	Red	230 psi @ 72° F	00000000	000000
1	1 5/16"	0.957"	0.179"	PVDF Plastic	Red	210 psi @ 72° F	00000000	000000
1 1/2	1 29/32"	1.5"	0.2"	PVDF Plastic	Red	160 psi @ 72° F	00000000	000000
2	2 3/8"	1.939"	0.218"	PVDF Plastic	Red	130 psi @ 72° F	00000000	000000
5 ft.
1/2	27/32"	0.546"	0.147"	PVDF Plastic	Red	290 psi @ 72° F	00000000	000000
3/4	1 3/64"	0.742"	0.154"	PVDF Plastic	Red	230 psi @ 72° F	00000000	000000
1	1 5/16"	0.957"	0.179"	PVDF Plastic	Red	210 psi @ 72° F	00000000	000000
1 1/2	1 29/32"	1.5"	0.2"	PVDF Plastic	Red	160 psi @ 72° F	00000000	000000
2	2 3/8"	1.939"	0.218"	PVDF Plastic	Red	130 psi @ 72° F	00000000	000000

High-Strength Heat-Shrink Tubing

With excellent resistance to tears and cuts, this tubing withstands demanding use. It also resists chemicals.

PVDF tubing has an additive that makes it flame retardant, so it resists combustion and minimizes the spread of flames.

AMS/MIL-DTL-23053/8 and AMS/MIL-DTL-23053/11 tubing meets requirements for material quality.

Flame rated VW-1 tubing meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.

Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.

PVDF Plastic

Shrink Ratio: 2:1
Dielectric Strength: 900 V/mil
Shrink Temperature: 350° F
Temperature Range: -65° to 345° F
AMS/MIL-DTL-23053/8, CSA Certified, Flame Rated VW-1, UL Recognized

1/2 ft. Lg.

ID
Before Shrinking	Min. After Shrinking	Min. Wall Thick. After Shrinking	Color	Pkg. Qty.		Pkg.
0.13"	0.06"	0.01"	Clear	10	0000000	00000
0.25"	0.13"	0.01"	Clear	10	0000000	00000
0.38"	0.19"	0.01"	Clear	10	0000000	00000
0.5"	0.25"	0.01"	Clear	10	0000000	00000
0.75"	0.38"	0.02"	Clear	2	0000000	00000
1"	0.5"	0.02"	Clear	1	0000000	00000

4 ft. Lg.

ID
Before Shrinking	Min. After Shrinking	Min. Wall Thick. After Shrinking	Color		Each
0.06"	0.03"	0.01"	Clear	0000000	00000
0.13"	0.06"	0.01"	Clear	0000000	0000
0.25"	0.13"	0.01"	Clear	0000000	0000
0.38"	0.19"	0.01"	Clear	0000000	00000
0.5"	0.25"	0.01"	Clear	0000000	00000
0.75"	0.38"	0.02"	Clear	0000000	00000
1"	0.5"	0.02"	Clear	0000000	00000

Flame-Retardant Abrasion-Resistant Heat-Shrink Tubing

Material: PVDF Plastic
Shrink Ratio: 2:1
Dielectric Strength: 400 V/mil
Shrink Temperature: 305° F
Temperature Range: -65° to 300° F
AMS/MIL-DTL-23053/18 Class 2, Flame Rated VW-1, UL Recognized

Made of PVDF, this tubing has excellent cut and abrasion resistance. A flame-retardant additive makes it combustion resistant and minimizes the spread of flames. It’s flame rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material. Tubing meets AMS/MIL-DTL-23053/18 Class 2 for material quality and color.

Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.

1/2 ft. Lg.

ID
Before Shrinking	Min. After Shrinking	Min. Wall Thick. After Shrinking	Choose a Color	Pkg. Qty.		Pkg.
0.19"	0.09"	0.01"	Black, Clear	5	0000000	00000
0.25"	0.13"	0.01"	Black, Clear	5	0000000	0000
0.38"	0.19"	0.01"	Black, Clear	5	0000000	0000
0.5"	0.25"	0.01"	Black, Clear	5	0000000	0000
0.75"	0.38"	0.02"	Black, Clear	5	0000000	00000
1"	0.5"	0.02"	Black, Clear	1	0000000	0000

4 ft. Lg.

ID
Before Shrinking	Min. After Shrinking	Min. Wall Thick. After Shrinking	Choose a Color		Each
0.19"	0.09"	0.01"	Black, Clear	0000000	00000
0.25"	0.13"	0.01"	Black, Clear	0000000	0000
0.38"	0.19"	0.01"	Black, Clear	0000000	0000
0.5"	0.25"	0.01"	Black, Clear	0000000	00000
0.75"	0.38"	0.02"	Black, Clear	0000000	00000
1"	0.5"	0.02"	Black, Clear	0000000	00000

Harsh Environment Heat-Shrink Tubing Assortments

Maintain a supply of tubing in a variety of sizes and materials that withstands harsh conditions such as abrasion, moisture, and chemicals.

PVC tubing has excellent resistance to chemicals, oil, and acids.

Polyolefin is for general purpose use. Polyolefin with adhesive creates a water-resistant seal; the adhesive melts when heated and bonds to the underlying surface.

PTFE has excellent abrasion resistance and withstands higher temperatures than other tubing.

FEP tubing is high strength to resist abrasion, cuts, tears, and chemicals.

PVDF resists abrasion, cuts, and tears.

Plastic Box

Includes	Number of Pieces	Lg.	Shrink Ratio	Shrink Temp., °F	Colors Included		Each
0.05"-0.75" ID Before Shrinking of Polyolefin (41 pieces, 9 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 3 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes)	82	1/2ft.	2:1, 2.5:1	195° to 340°	Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow	00000000	0000000
0.05"-1" ID Before Shrinking of Polyolefin (49 pieces, 10 sizes) 0.25"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (52 pieces, 5 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.08" ID Before Shrinking of PTFE (17 pieces, 5 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (22 pieces, 6 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 12 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes)	181	1", 1/2ft.	1.2:1, 1.5:1, 2:1, 2.5:1, 3:1	195° to 485°	Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow	00000000	000000
0.06"-0.5" ID Before Shrinking of Polyolefin (42 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (16 pieces/6sizes) 0.06"-0.5" ID Before Shrinking of PVC (14 pieces, 7 sizes) 0.17"-0.5" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 Sizes, 4 each)	112	1/2ft.	1.2:1, 2:1, 2.5:1, 3:1	195° to 395°	Black, Blue, Brown, Clear, Gray, Green, Green with Yellow Stripe, Red, White, Yellow	00000000	000000
0.13"-1" ID Before Shrinking of Polyolefin (22 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of Polyolefin with Adhesive (31 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of PVDF (20 pieces, 7 sizes)	73	1/2ft.	2:1, 3:1	250°	Black, Clear, Red	0000000	000000
0.13"-0.5" ID Before Shrinking of Polyolefin with Adhesive Lining (5 sizes) 0.13"-0.5" ID Before Shrinking of PVC (5 sizes) 0.13"-0.5" ID Before Shrinking of PVDF (5 sizes)	150	1/2ft.	2:1	195° to 350°	Black, Clear	000000	000000

Terms and Conditions and Privacy Policy