V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail.

High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.

Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel.

Use these carriages and guide rails for light loads where precise movement is not required.

A handle on the side of the carriage locks the carriage in place.

Nylon rollers and aluminum rails make these good for light duty applications.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.

Use these carriages and guide rails in temperatures up to 300° F.

With a wide base, these sleeve bearing carriages stabilize moment (twisting) and off-center loads better than standard carriages. Use in areas where multiple carriages or rails won't fit.

C-shaped guide rails grip the carriage around the outside to support linear motion along walls and other vertical surfaces.

The square profile prevents loads from twisting and rotating.

These carriages and guide rails are steel.

Designed specifically for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

These carriages and guide rails are steel.

Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

With a wide base and low-profile design, these carriages and guide rails stabilize moment (twisting) and off-center loads better than other carriages and rails. They're good for use in areas where multiple carriages or rails won't fit.

With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages.

Slides have a row of ball bearings on each side of the rail.

Good for use in pick-and-place applications, machine tool doors, and telescopic press arms, these rugged slides are designed to carry heavy loads.

A micrometer handle ensures accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Three micrometer handles ensure accurate, repeatable positioning along three axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Two micrometer handles ensure accurate, repeatable positioning along two axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Made with Frelon bearings, these slides have over four times the load capacity of standard positioning slides.

Combine track, mounting brackets, and hangers to create a system for hanging doors.

Round track eliminates edges where dust and debris can accumulate.

Curved track pieces allow you to create a wide variety of layouts for doors, curtains, and strip doors.

Built to withstand corrosive marine environments, track is anodized aluminum and hangers are 316 stainless steel.

For smoother operation, these sets include upper and lower roller track for hanging lightweight cabinet doors that slide past each other.