Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

Create continuous runs of channel without corners.

This welded, one-piece strut channel combines two strut channels back-to-back.

Slide the strut channel into the tube for telescoping length adjustments.

Serrated grooves grip the lip of the channel.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.

Connect two channels to create a stacked channel.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Keep hardware centered in the strut channel slot.

Use with hex nuts to connect threaded rod.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.

Support the corners of strut channel structures.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Cover rough ends of strut channel.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Create strong structures by welding this framing together. Add metal panels to close off openings.

Connect rails and posts with included slip-on fittings to quickly assemble a railing.

Combine bases, rails, gates, and toeboards to create a barrier customized to your needs. Base is weighted to allow installation without drilling holes.

Provide a place to grip when passing through a roof hatch.

Create a temporary barrier around hazards such as open manholes.

These are the same guardrails you see along roadways.

Start with two bases and then stack rails to the desired height.

These guardrails sit low to the ground to protect racks and equipment without restricting access.

A hydraulic arm allows these gates to close smoothly.

Gates collapse for easy transport and storage.

Track provides the runway for trolleys, carriers, and chain in manual and powered systems.

Carriers attach loads to the trolley chain with a scissor-like action and pivot as the conveyor makes elevation changes.

Track provides the runway for trolleys in manual and powered systems.

The stacked design provides stability for deep and wide drawers.

A lever locks the drawer in the open as well as closed position; push the lever to release the lock.

Slides only extend 3/4 of the closed length to reduce the chance that a heavy load will tip your cabinet.

Open drawers from either side of a cart or cabinet—these slides let drawers pass through for two-way access to contents.

A stop holds the drawer open; push firmly on the drawer to close.

When you don't have enough clearance for side-mount or under-the-counter slides, mount these to the base of your drawer.

Mount these slides underneath countertops, desktops, shelves, and tables. They are often used to hold keyboard trays.

These complete sets contain everything you need to create a system for hanging doors.

Narrow track allows you to hang doors in tight spaces.

These sets include everything you need to hang two doors that slide past each other.

A removable collar allows access to the shaft without unbolting the flange. For use with light to medium loads where shaft alignment is not critical, these carbon steel supports allow you to hold linear shafts perpendicular to the mounting surface. Secure the shaft by tightening the clamping screw.

Mount items not designed for DIN rail by attaching them to these adapters.

Customize component placement without drilling leaky holes—these channels screw into the mounting bosses in your enclosure.

Designed for heavy duty applications, these brackets support metal and wooden handrails on stairs and ramps.

Hold different square drive sizes on the four clip rails stored in these trays.