Protect against chemical spills and splashes. These suits are polyester with a PVC coating inside and out. They have snaps down the front and a storm flap to keep liquid splashes out. Sleeves and bib overalls have open cuffs to fit over gloves and boots. Bib overalls have adjustable suspenders to modify the length.

Fasten a hood (sold separately) to jackets with collar snaps.

These suits meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet ASTM F2733 standards for protection against flash fires. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These suits are made of PVC-coated Nomex aramid. Jackets have snaps down the front and a storm flap to keep rain out. Sleeves have hook and loop cuffs; tighten to fit your wrist or expand to wear over gloves. The bib overalls have adjustable suspenders to modify the length.

When measuring chest size, measure around the fullest part of your chest. Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these suits.

Bright colors and reflective stripes make workers stand out in low-visibility environments. These jackets meet ANSI/ISEA 107 Class 3 standards for workers in high-risk areas that need to be seen by traffic at a minimum distance of 1/4 of a mile. They are polyester to keep you dry in wet and rainy conditions. These jackets have a zipper down the front with a storm flap to keep rain out. They have hook and loop closures on the cuffs to modify the fit and two waist pockets.

Women’s jackets have a contoured fit. Fold them into their own hood or lower front pocket and zip them closed to pack them away. They have an adjustable elastic hem—cinch the toggle piece to tighten it and keep out rain at the bottom. To cool off while remaining dry, unzip the underarm vents.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Keep dry in wet and rainy conditions. These jackets resist mildew and are washable. They have snaps down the front with a storm flap to help keep rain out, as well as snaps on the cuffs.

PVC-coated polyester provides good resistance to water and abrasion. These jackets have two waist pockets and an attached hood.

Gore-Tex/nylon blend is extremely durable. It provides excellent protection from water, wind, and abrasion, while allowing perspiration to evaporate to keep you cool. Fasten a hood (sold separately) to the collar snaps.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Protect against chemical spills and splashes. These jackets are polyester with a PVC coating inside and out. Snaps down the front and a storm flap helps keep liquid splashes out. They have open cuffs.

Fasten a hood (sold separately) to jackets with collar snaps.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

These jackets meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet ASTM F2733 standards for protection against flash fires. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These jackets are made of PVC-coated Nomex aramid. They have snaps down the front and a storm flap to keep rain out. They have hook and loop cuffs; tighten to fit your wrist or gloves.

Fasten a hood (sold separately) to the collar snaps.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Ponchos are spacious for a generous fit, so they work well to protect against rain when wearing bulky work clothes and equipment such as backpacks.

PVC is lightweight and good for single-use applications.

PVC-coated polyester is thicker and more abrasion-resistant than PVC. It resists mildew and can be washed. These ponchos have snaps on each side to keep the sides shut.

Bright colors and reflective stripes make workers stand out in low-visibility environments. These overalls meet ANSI/ISEA 107 Class E standards for high-visibility clothing—wear with a Class 2 or Class 3 vest, shirt, or jacket to meet Class 3 visibility requirements (visibility by traffic at a minimum distance of 1/4 of a mile). They are polyamide-coated polyester to keep you dry in wet and rainy conditions. They have snaps on the cuffs, adjustable suspenders to modify the length, and a hook and loop chest pocket.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these overalls.

Coveralls provide full body protection against dirt and grime. They have a zipper down the front.

Coated polypropylene protects against nonhazardous liquid spills and splashes, such as water and paint spray. It has good tear resistance. Coveralls with a vented panel allow heat and moisture to escape.

Tyvek polyethylene provides better tear and abrasion resistance than polypropylene and coated polypropylene. It holds up to occasional contact with nonhazardous liquids, such as water and paint spray. It is made of heat- and pressure-bonded fibers for a material that’s soft yet strong.

Kleenguard polypropylene is made of five layers of nonwoven fabric, so it is more abrasion resistant and harder to tear than polypropylene, coated polypropylene, and Tyvek polyethylene. It holds up to occasional contact with nonhazardous liquids, such as water and paint spray. The material is antistatic, so it protects sensitive equipment from electrostatic discharge.

Comformax/polyester blend is a specially treated wood pulp and fabric blend material that repels liquids, including blood and other bodily fluids. It has good tear resistance and offers some breathability.

Open cuffs provide better airflow than elastic cuffs. Elastic cuffs help keep dirt and grime out better than open cuffs.

Use the size chart for general guidance. When choosing a size, consider individual body shape and clothing worn underneath.

Stay warm without the bulk of heavy coats and multiple layers. These jackets have a battery-operated heated core, so you can work comfortably in temperatures as low as -5° F. Adjust the temperature from low to high, as well as the areas you want to heat, with the touch of a button. Made of lightweight polyester, these jackets aren’t bulky, yet they’re water, wind, and abrasion resistant. They’re washer and dryer safe, making them easy to clean. Jackets have two heated waist pockets and a separate pocket for storing the battery. All include a long-lasting, rechargeable lithium-ion battery that provides up to eight hours of warmth and the battery charger.

Note: Battery life is significantly reduced when jackets are used at the high heat setting.

Men’s jackets have adjustable hook and loop cuffs that allow you to loosen and tighten them over gloves.

Women’s jackets have knit cuffs with thumb slots to trap heat and keep sleeves in place.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

These jackets protect you from the cold and wind while offering greater mobility than heavyweight coats. They have a zipper down the front.

Cotton/polyester jackets provide the comfort of a sweatshirt with the warmth of a jacket. Women’s cotton/polyester jackets have a water-repellent finish to keep you dry. Adjustable hook and loop cuffs tighten to fit your wrists and expand to fit over gloves. These jackets come with a snap-on hood—tighten the draw cord for a snug fit to keep out wind. They have two waist pockets, a chest pocket, and an internal chest pocket.

Nylon jackets have a water-resistant shell and are more abrasion resistant than cotton/polyester jackets. They have a layer of polyester insulation to keep you warm in cold temperatures. Men’s nylon jackets have adjustable hook and loop cuffs; tighten to fit your wrist or expand to fit over gloves. They have two waist pockets and one chest pocket. Women’s nylon jackets have knit cuffs to trap heat and keep jackets in place. An attachable hood snaps onto these jackets and snaps closed for a snug fit to keep out wind. They have two waist pockets, one chest pocket, and two internal chest pockets.

Keep warm in bitterly cold conditions—down to -50° F. Coats are thicker and longer than jackets for added protection against the cold and wind. Made of nylon, these coats have a wind- and water-resistant outer shell and a layer of polyester insulation for added warmth. They have a flap that snaps shut over the zipper. Knit cuffs trap heat and keep sleeves in place. Coats have two waist pockets and one pocket on the left sleeve.

Men’s coats also have a chest pocket.

Attach a hood (sold separately) to the collar snaps.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these coats.

Stay warm and dry when working in cold, windy conditions. All coveralls have a water-resistant outer shell, as well as a soft, quilted lining for warmth and comfort. Knit cuffs on the sleeves trap heat and keep sleeves in place.

Style A are nylon with a layer of polyester insulation. The legs have snaps to secure the bottom around boots. These coveralls have hip-to-ankle zippers on each leg, as well as six pockets.

Style B provide better abrasion resistance than Styles A and C. These coveralls are denim with a layer of polyester insulation for added warmth. They have hip-to-ankle zippers on each leg, as well as eight pockets.

Style C resist temperatures down to -50° F. They are nylon with a layer of polyester insulation. They have knee-to-ankle zippers, as well as three pockets. The legs on regular-length Style C coveralls have snaps to secure the bottom around boots.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these coveralls.

Designed to meet clean room standards, these coats act as a barrier between the worker and the room to prevent pollutants, such as dust particles and microbes, from contaminating a space. They’re suitable for use in clean rooms rated to both Federal Standard and ISO classes. In both systems, clean rooms with lower class ratings have fewer contaminants. They are knee length with elastic cuffs on the sleeves, which help keep liquid splashes out.

Tyvek polyethylene holds up to occasional contact with nonhazardous liquids, such as water and paint spray. It is made of heat- and pressure-bonded fibers for a material that’s soft yet strong. These coats are disposable.

Polyester greatly outlasts Tyvek polyethylene. It resists abrasion and liquid splashes and is reusable when laundered to clean room standards—lasts for up to 100 washes. Must be laundered prior to first use.

Use the size chart for general guidance. When choosing a size, consider individual body shape and clothing worn underneath.

Made of 99% polyester and 1% carbon fiber, these coats repel liquids. These knee-length coats are also known as barrier coats. They have knit cuffs to keep liquid from splashing into sleeves.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over clothing you expect to wear under the coat.