For Opening Shape For Opening Shape |
|---|
 |  |
| Round | Rectangular |
Rod Material Rod Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Environment Environment |
|---|
Connection Style Connection Style |
|---|
 |
| Flanged |
 |
| Quick Clamp |
 |
| Threaded |
Specifications Met Specifications Met |
|---|
|
For Use With For Use With |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
|
Sanitary Magnetic Rod Filters
Remove foreign particles from food and other sanitary material with these magnetic filters. As material passes through, magnets sealed inside each rod draw metal and other contaminants out. The smooth-ground weld seams and polished surfaces are free of pits and crevices where bacteria could grow, making these filters easy to sanitize. Made from 316 stainless steel, they will not corrode from frequent washdowns with harsh cleaners. These filters are often installed in gravity hoppers, chutes, and bins in sanitary areas, such as food processing lines. They help you comply with Hazard Analysis and Critical Control Point (HACCP) programs.
Filters that are USDA certified meet the highest standards of sanitary design. With extremely smooth surfaces and no sharp corners, every inch of filter can be thoroughly cleaned. They’re polished to a minimum smoothness of 32 Ra, and corners are ground to a 0.125" radius or greater.
For technical drawings and 3-D models, click on a part number.
Filters | USDA Certified Filters | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | No. of Magnetic Rods | Rod Dia. | Spacing Between Rods | Magnet Material | Frame Material | Rod Material | Each | Each | ||
12.5 lbs. Max. Magnetic Pull | |||||||||||
| 6" | 6" | 3 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 0000000 | 0000000 | 000000000 |
| 10" | 10" | 5 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 | 0000000 | 00000000 |
| 12" | 12" | 6 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 | 0000000 | 00000000 |
| 12" | 16" | 8 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 | 0000000 | 00000000 |
| 14" | 14" | 7 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 | 0000000 | 00000000 |
Filters | USDA Certified Filters | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Opening Dia. | OD | Rod Dia. | Spacing Between Rods | Magnet Material | Frame Material | Rod Material | No. of Magnetic Rods | Each | Each | ||
12.5 lbs. Max. Magnetic Pull | |||||||||||
| 6" | 5 3/4" | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 2 | 0000000 | 0000000 | 0000000 | 000000000 |
| 12" | 11 3/4" | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 5 | 0000000 | 00000000 | 0000000 | 00000000 |
Rods for Magnetic Filters
Replace individual rods in an existing filter or create a custom filter. Magnets are sealed in the rod.
Rods with a maximum magnetic pull of 11.2 lbs. catch metal filing, shaving, residue from metal wear, and other small particles.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||
|---|---|---|---|---|---|---|---|
| Lg. | Rod Dia. | No. of | Thread Size | Magnet Material | Rod Material | Each | |
11.2 lbs. Max. Magnetic Pull | |||||||
| 4" | 1" | 2 | 1/4"-20 | Neodymium | 316 Stainless Steel | 0000000 | 0000000 |
| 6" | 1" | 2 | 1/4"-20 | Neodymium | 316 Stainless Steel | 0000000 | 000000 |
| 8" | 1" | 2 | 1/4"-20 | Neodymium | 316 Stainless Steel | 0000000 | 000000 |
| 10" | 1" | 2 | 1/4"-20 | Neodymium | 316 Stainless Steel | 0000000 | 000000 |
| 12" | 1" | 2 | 1/4"-20 | Neodymium | 316 Stainless Steel | 0000000 | 000000 |
| 14" | 1" | 2 | 1/4"-20 | Neodymium | 316 Stainless Steel | 0000000 | 000000 |
| 16" | 1" | 2 | 1/4"-20 | Neodymium | 316 Stainless Steel | 0000000 | 000000 |
| 18" | 1" | 2 | 1/4"-20 | Neodymium | 316 Stainless Steel | 0000000 | 000000 |
| 20" | 1" | 2 | 1/4"-20 | Neodymium | 316 Stainless Steel | 0000000 | 000000 |
| 24" | 1" | 2 | 1/4"-20 | Neodymium | 316 Stainless Steel | 0000000 | 000000 |
Magnetic Rod Filters
These filters are designed without guide rods to prevent wet and sticky material from blocking flow. Use to pull ferrous metal scrap and particles out of your process line. Mount filters inside gravity hoppers, chutes, drawers, housings, and surge-and-catch bins. Magnets are sealed in the magnetic rod.
Filters with a maximum magnetic pull of 11.2 lbs. catch metal filings, shavings, residue from metal wear, and other small particles.
For technical drawings and 3-D models, click on a part number.
| Lg. | Wd. | No. of Magnetic Rods | Rod Dia. | Spacing Between Rods | Magnet Material | Frame Material | Rod Material | Each | |
11.2 lbs. Max. Magnetic Pull | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 6" | 6" | 3 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 0000000 |
| 8" | 8" | 4 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 000000 |
| 10" | 8" | 5 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 000000 |
| 10" | 10" | 5 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
| 12" | 12" | 6 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
| 14" | 14" | 7 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
| 16" | 12" | 6 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
| For Opening Dia. | OD | No. of Magnetic Rods | Rod Dia. | Spacing Between Rods | Magnet Material | Frame Material | Rod Material | Each | |
11.2 lbs. Max. Magnetic Pull | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 6" | 5 3/4" | 3 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 0000000 |
| 8" | 7 3/4" | 4 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 000000 |
| 10" | 9 3/4" | 5 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
| 12" | 11 3/4" | 6 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
| 14" | 13 3/4" | 7 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
| 20" | 19 3/4" | 10 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
Magnetic Rod Filters with Guide Rods
The guide rods direct flow to the magnetic rods. These filters are helpful in removing dry ferrous metal scrap and particles from fine powder and low-flow applications. Mount inside gravity hoppers, chutes, drawers, housings, and surge-and-catch bins. Magnets are sealed in the magnetic rod.
Filters with a maximum magnetic pull of 11.2 lbs. catch metal filing, shaving, residue from metal wear, and other small particles.
For technical drawings and 3-D models, click on a part number.
| Lg. | Wd. | No. of Magnetic Rods | Rod Dia. | Spacing Between Rods | Magnet Material | Frame Material | Rod Material | Each | |
11.2 lbs. Max. Magnetic Pull | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 6" | 6" | 3 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 0000000 |
| 8" | 8" | 4 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 000000 |
| 10" | 8" | 5 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 000000 |
| 10" | 10" | 5 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
| 12" | 12" | 6 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
| 14" | 14" | 7 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
| 16" | 12" | 6 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
| For Opening Dia. | OD | No. of Magnetic Rods | Rod Dia. | Spacing Between Rods | Magnet Material | Frame Material | Rod Material | Each | |
11.2 lbs. Max. Magnetic Pull | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 6" | 5 3/4" | 3 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 0000000 |
| 8" | 7 3/4" | 4 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 000000 |
| 10" | 9 3/4" | 5 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
| 12" | 11 3/4" | 6 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
| 14" | 13 3/4" | 7 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
| 20" | 19 3/4" | 10 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 0000000 | 00000000 |
Quick-Clean Magnetic Rod Filters
Pull the rods from their sleeve to release particles stuck to the filter. These filters catch fine particles such as metal filings, shavings, and residue from metal wear in your process line. Mount inside gravity hoppers, chutes, drawers, housings, and surge-and-catch bins. Magnets are sealed in rods.
For technical drawings and 3-D models, click on a part number.
| Lg. | Wd. | No. of Magnetic Rods | Rod Dia. | Spacing Between Rods | Magnet Material | Frame Material | Rod Material | Sleeve Material | Each | |
7.7 lbs. Max. Magnetic Pull | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 6" | 6" | 3 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 316 Stainless Steel | 00000000 | 0000000 |
| 8" | 8" | 4 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 316 Stainless Steel | 00000000 | 000000 |
| 10" | 10" | 5 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 316 Stainless Steel | 00000000 | 00000000 |
| 12" | 12" | 6 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 316 Stainless Steel | 00000000 | 00000000 |
| 16" | 12" | 6 | 1" | 1" | Neodymium | 316 Stainless Steel | 316 Stainless Steel | 316 Stainless Steel | 00000000 | 00000000 |
Compact Magnetic Rod Filters for Coolant
Keep coolant systems free of small particles, such as chip filings and metal dust. The magnets are sealed in the rod.
| Pipe Size | Thread Type | Max. Pressure | Ht. | Dia. | Max. Temp., °F | Magnet Material | Rod Material | Housing Material | Gasket Material | Each | |
| 1/2 | NPT | 200 psi | 6 3/16" | 4 5/8" | 150° | Neodymium | 304 Stainless Steel | Aluminum | Buna-N Rubber | 00000000 | 0000000 |
Sanitary Magnetic Strainers
- For Use With: Beverage, Dairy, Food, Salt Solutions, Sodium Nitrate, Water
- Max. Pressure: 150 psi @ 225° F
- Temp. Range: -20° to 225° F
Draw metal shavings and other contaminants out of your sanitary liquid line with these strainers. As liquid swirls through the strainer cavity, magnets sealed inside capture any metal bits. Remaining impurities are separated out with gravity and trapped in a collection sump. Empty the strainers by removing the lid and scooping up the collected particles at the bottom of the enclosure.
Made from 316 stainless steel, these strainers will not corrode from frequent washdowns with harsh cleaners. The continuous weld seams and polished surfaces are free of pits and crevices where bacteria could grow, making them easy to sanitize. These strainers are also rated for high temperatures, so you can keep them on your line during a heated clean-in-place (CIP) process. They are FDA compliant, meaning they are safe for food contact.
For frequent deep cleans and line changes, choose a strainer with quick clamp connections. Also known as tri-clamp fittings, they connect with a gasket, a clamp, and another quick-clamp fitting for quick removal and assembly. The included gaskets are FDA compliant.
To connect strainers with flanged connections to your line, bolt two same-size flanges together with a gasket (sold separately) in between.
Filters that are USDA certified meet the highest standards of sanitary design.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Max. Magnetic Pull, lbs. | Lg. | Ht. | Magnet Material | Gasket Material | Specifications Met | Each | |
Strainers | ||||||||
|---|---|---|---|---|---|---|---|---|
316 Stainless Steel | ||||||||
| 2 | 14.25 | 9 3/4" | 9 3/8" | Neodymium | Buna-N Rubber | FDA Compliant 21 CFR 177.2600 | 0000000 | 000000000 |
| 3 | 14.25 | 9 13/16" | 9 3/8" | Neodymium | Buna-N Rubber | FDA Compliant 21 CFR 177.2600 | 0000000 | 00000000 |
USDA Certified Strainers | ||||||||
316 Stainless Steel | ||||||||
| 2 | 14.25 | 9 3/4" | 9 3/8" | Neodymium | Buna-N Rubber | FDA Compliant 21 CFR 177.2600 USDA Certified | 0000000 | 00000000 |
| 3 | 14.25 | 9 13/16" | 9 3/8" | Neodymium | Buna-N Rubber | FDA Compliant 21 CFR 177.2600 USDA Certified | 0000000 | 00000000 |
Connection
(Unassembled)
Flange | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | OD | Thick. | For ANSI Flange Class | Max. Magnetic Pull, lbs. | Lg. | Ht. | Magnet Material | Gasket Material | Specifications Met | Each | |
Strainers | |||||||||||
316 Stainless Steel | |||||||||||
| 2 | 6" | 1" | 150 | 14.25 | 11 1/4" | 9 3/8" | Neodymium | Buna-N Rubber | FDA Compliant 21 CFR 177.2600 | 0000000 | 000000000 |
| 3 | 7 1/2" | 1 3/16" | 150 | 14.25 | 12 5/8" | 10 1/4" | Neodymium | Buna-N Rubber | FDA Compliant 21 CFR 177.2600 | 0000000 | 00000000 |
USDA Certified Strainers | |||||||||||
316 Stainless Steel | |||||||||||
| 2 | 6" | 1" | 150 | 14.25 | 11 1/4" | 9 3/8" | Neodymium | Buna-N Rubber | FDA Compliant 21 CFR 177.2600 USDA Certified | 0000000 | 00000000 |
| 3 | 7 1/2" | 1 3/16" | 150 | 14.25 | 12 5/8" | 10 1/4" | Neodymium | Buna-N Rubber | FDA Compliant 21 CFR 177.2600 USDA Certified | 0000000 | 00000000 |
| Replacement Lid Gasket | 0000000 | Each | 000000 |