Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Pivot the head to access fasteners from an angle.

Extra length allows access to fasteners on long bolts.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.

The six lobes of the External Torx-Plus drive are flattened at the top to maximize their grip on fasteners, which keeps these sockets from slipping off during high-torque installations.

Quickly position these sockets on square fasteners.

Grip the indentations around the outside of tri-groove fasteners.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

Extra-long bits allow access to hard-to-reach fasteners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

These sockets are also known as Robertson bits.

Pivot the head to access fasteners from an angle.

Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.

Turn the knob to adjust the jaws and fit a range of fastener sizes.

A magnet holds the fastener securely enough to drive self-tapping screws.

Extra length allows access to fasteners on long bolts.

Pivot the head to access fasteners from an angle.

Made of beryllium copper, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Pivot the head to access fasteners from an angle.

The 12-point shape quickly positions on hex fasteners.

Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.

A magnet holds the fastener securely enough to drive self-tapping screws.

The handle is covered in rubber for a comfortable grip.

A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.

No need to pull the socket off the tool—push a button to release.

Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.

Made of aluminum-bronze, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

Pivot the head to access fasteners in tight spots.

The 25° offset head provides clearance when reaching over obstructions.

Pivot the head for access to fasteners in tight spots.

A rubber coating provides a comfortable grip.

Turn sockets from above when there's not room to swing a standard wrench handle.

These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

These wrenches have an accuracy of ±3.5%.

A main pointer on the dial shows torque as it’s being applied and a memory pointer indicates the maximum torque reached.

Anchor these multipliers for added stability.

Use these tools for general shop applications.

These tools are suitable for general shop, maintenance, and automotive work.

Built for durability, these wrenches handle the demands of high-volume production and tough maintenance applications.

For high quality at a lower price, choose these U.S.A.-made sets.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Pivot the head to access fasteners from an angle.

Quickly position these sockets on square fasteners.

With sizes from EP10 to EP24, these sets have the sockets you need to install and remove a wide range of External Torx-Plus fasteners. Pair them with a square drive tool, such as a socket wrench, to deliver high levels of torque without slipping.

The short bit on these sockets fits in spaces where height clearance is limited.

Extra-long bits allow access to hard-to-reach fasteners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.

These sockets are also known as pin-in-hex or pin-in-socket bits.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the socket.

Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

Attach to your socket for a longer reach.

These sockets are made to withstand the high torque and force of impact tools.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Pivot the head to access fasteners from an angle.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.