Pivot the head to access fasteners in tight spots. Set the torque and these wrenches will indicate when it’s reached with an audible click and an impulse in the grip.

Wrenches with a 3/8” square drive size come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy. To relieve pressure on the spring and maintain calibration, set the torque to the lowest reading on the scale when not in use.

Wrenches with a 1/2” square drive size meet ISO 6789 international calibration standards as well as ASME B107.300 safety standards for manual torque-measuring tools. To relieve pressure on the spring and maintain calibration, set these wrenches to 20% of the maximum torque when not in use.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

Unlike most torque wrenches, you don’t have to set torque to the lowest value on the scale after use. This wrench indicates when your set torque is reached with an audible click and an impulse in the grip. It's also known as a split-beam torque wrench. Wrench comes with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Breaker bar handle (sold separately) attaches to the head of your torque wrench to break stuck fasteners free without risking damage to the wrench. It extends for additional length.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

Measure with an accuracy of ±2.0%. These wrenches display torque as it’s measured and the maximum torque reached. Use to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. To fasten to a specific value, set the desired torque—lights and an audible alarm indicate when target has been reached or exceeded. Wrenches come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements. The digital display shows how torque measurements change as you turn the wrench. Use these tools to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. Wrenches have programmable, lockable presets that allow you to set up different torque settings in sequence to ensure correct, reliable operation. Lights, an audible alarm, and a vibration in the handle indicate when target has been reached or exceeded. Tools come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Note: Accuracy ratings apply to the entire torque range.

Wrenches with a USB cord can transfer stored data to a PC—no separate software required.

Pivot the box end for access to fasteners in tight spots. The ratchet mechanism allows you to turn fasteners without removing and repositioning the tool. Flip these wrenches over to ratchet in the opposite direction. Wrenches are polished for a mirror-like finish.

Horizontal-flex wrenches have a button that locks and unlocks the head.