Filter by
System of Measurement
Reamer Size
Reamer Diameter
For Use On
Flute Style
Shank Type
Material
Reamer Type
Number of Flutes
Overall Length
Flute Length
DFARS (Defense Acquisition Regulations System)
Shank Diameter
Spiral Direction
Application
For Taper Pin Number
Reach Length
Square Shank Size
For Dowel Pin Diameter
Number of Blades
Blade Style
Rate of Taper
Application
Application
Application
Size
Size
Type
Sets
Reamers
Finish holes to precise inch, metric, wire gauge, or letter sizes with these reamers.
Material
- High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
- Titanium Nitride (TiN) Coated High-Speed Steel—Coated to create less friction than uncoated high-speed steel reamers, these run faster and last twice as long.
- Cobalt Steel—With better heat and wear resistance than high-speed steel, these reamers run up to 25% faster, last longer, and perform better on hard materials, such as cast iron, hardened steel, titanium, and stainless steel.
- Carbide-Tipped Steel—Since these reamers retain a sharper, harder edge at higher temperatures than high-speed steel and cobalt steel, they can be used on hard materials, such as iron, hardened steel, and steel alloys. They aren't as brittle as solid carbide reamers, so they can be used in less rigid setups, such as a hand-held drill.
- Carbide—For the highest level of accuracy when cutting hard materials, these are our hardest, strongest, and most wear-resistant reamers. They're used on materials such as iron, hardened steel, steel alloys, and plastic. Their hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the reamer from breaking.
For technical drawings and 3-D models, click on a part number.Round Shank
These reamers fit in the chuck of drill presses, turret lathes, and other machine and power tools, making them the most common shank type.
Reamer Size | Reamer Diameter | Material | Flute Length | Overall Length | Number of Flutes | Spiral Direction | Cutting Diameter Tolerance | For Use On | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Straight Flutes—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0312" | 0.0312" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 2995A111 | $18.37 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0405" | 0.0405" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A101 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0415" | 0.0415" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A102 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0425" | 0.0425" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A103 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0435" | 0.0435" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A104 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0440" | 0.0440" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A105 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0445" | 0.0445" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A106 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0450" | 0.0450" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A107 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0455" | 0.0455" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A108 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0460" | 0.0460" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A109 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/64" | 0.0469" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 2995A112 | 17.33 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/64" | 0.0469" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 2975A19 | 23.85 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0470" | 0.0470" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A111 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0470" | 0.0470" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A12 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0475" | 0.0475" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A112 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0475" | 0.0475" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A13 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0480" | 0.0480" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A113 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0480" | 0.0480" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A01 | 25.29 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0480" | 0.0480" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A14 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0485" | 0.0485" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A114 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0485" | 0.0485" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A15 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0490" | 0.0490" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A115 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0490" | 0.0490" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A02 | 25.29 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0490" | 0.0490" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A16 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0495" | 0.0495" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A116 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0495" | 0.0495" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A03 | 25.29 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0495" | 0.0495" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A17 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0500" | 0.0500" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A117 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0500" | 0.0500" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A04 | 25.29 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0500" | 0.0500" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A18 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0505" | 0.0505" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A118 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0505" | 0.0505" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A19 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0510" | 0.0510" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A119 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0510" | 0.0510" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A05 | 25.29 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0510" | 0.0510" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A21 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0515" | 0.0515" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A121 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0515" | 0.0515" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A22 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0525" | 0.0525" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A122 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0525" | 0.0525" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A24 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0530" | 0.0530" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A123 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0530" | 0.0530" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A25 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0535" | 0.0535" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A124 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0535" | 0.0535" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A26 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0540" | 0.0540" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A125 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0540" | 0.0540" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A06 | 25.29 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0540" | 0.0540" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A27 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0545" | 0.0545" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A126 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0545" | 0.0545" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A28 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0555" | 0.0555" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A127 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0555" | 0.0555" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A31 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0560" | 0.0560" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A128 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0560" | 0.0560" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A07 | 25.29 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0560" | 0.0560" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A32 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0565" | 0.0565" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A129 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0565" | 0.0565" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A33 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0570" | 0.0570" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A131 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0570" | 0.0570" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A34 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0575" | 0.0575" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A132 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0575" | 0.0575" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A35 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0580" | 0.0580" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A133 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0580" | 0.0580" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A36 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0585" | 0.0585" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A134 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0585" | 0.0585" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A37 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0590" | 0.0590" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A135 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0590" | 0.0590" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A38 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0600" | 0.0600" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A136 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0600" | 0.0600" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A08 | 25.29 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0600" | 0.0600" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A41 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0605" | 0.0605" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A137 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0605" | 0.0605" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A42 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0610" | 0.0610" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A138 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0610" | 0.0610" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A09 | 25.29 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0610" | 0.0610" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A43 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0615" | 0.0615" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A139 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0615" | 0.0615" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A1 | 25.29 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0615" | 0.0615" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A44 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0620" | 0.0620" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A141 | 19.79 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0620" | 0.0620" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A11 | 25.29 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0620" | 0.0620" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A45 | 36.23 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0622" | 0.0622" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 2777A12 | 18.57 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0623" | 0.0623" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 2777A13 | 18.57 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1/16" | 0.0625" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 2995A59 | 18.76 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1/16" | 0.0625" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 2975A21 | 23.85 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1/16" | 0.0625" | Carbide | 3/8" | 1 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 3026A11 | 27.99 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0630" | 0.0630" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A142 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0630" | 0.0630" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A12 | 24.78 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0630" | 0.0630" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A48 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0640" | 0.0640" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A143 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0640" | 0.0640" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A13 | 25.29 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0640" | 0.0640" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A51 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0645" | 0.0645" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A144 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0645" | 0.0645" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A14 | 28.95 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0645" | 0.0645" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A52 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0650" | 0.0650" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A145 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0650" | 0.0650" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A15 | 28.95 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0650" | 0.0650" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A53 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0655" | 0.0655" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A146 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0655" | 0.0655" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A54 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0660" | 0.0660" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A147 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0660" | 0.0660" | Cobalt Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A16 | 28.95 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0660" | 0.0660" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A55 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0665" | 0.0665" | High-Speed Steel | 1/2" | 2 1/2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A148 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0665" | 0.0665" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A56 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0675" | 0.0675" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A149 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0675" | 0.0675" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A58 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0680" | 0.0680" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A151 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0680" | 0.0680" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A59 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0685" | 0.0685" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A152 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0685" | 0.0685" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A61 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0690" | 0.0690" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A153 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0690" | 0.0690" | Cobalt Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A17 | 28.82 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0690" | 0.0690" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A62 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0695" | 0.0695" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A154 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0695" | 0.0695" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A63 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0705" | 0.0705" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A155 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0705" | 0.0705" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A65 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0710" | 0.0710" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A156 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0710" | 0.0710" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A66 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0715" | 0.0715" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A157 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0715" | 0.0715" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A67 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0720" | 0.0720" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A158 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0720" | 0.0720" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A68 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0725" | 0.0725" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A159 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0725" | 0.0725" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A69 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0735" | 0.0735" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A161 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0735" | 0.0735" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A72 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0740" | 0.0740" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A162 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0740" | 0.0740" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A73 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0745" | 0.0745" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A163 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0745" | 0.0745" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A74 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0750" | 0.0750" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A164 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0750" | 0.0750" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A75 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0755" | 0.0755" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A165 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0755" | 0.0755" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A76 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0765" | 0.0765" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A166 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0765" | 0.0765" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A78 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0770" | 0.0770" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A167 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0770" | 0.0770" | Cobalt Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A18 | 28.82 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0770" | 0.0770" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A79 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0775" | 0.0775" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A168 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0775" | 0.0775" | Carbide | 1/2" | 2" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A81 | 38.60 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0780" | 0.0780" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A169 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0780" | 0.0780" | Cobalt Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A19 | 27.06 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0780" | 0.0780" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A82 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/64" | 0.0781" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 2995A113 | 15.04 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/64" | 0.0781" | Cobalt Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 2975A34 | 19.27 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0790" | 0.0790" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A171 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0790" | 0.0790" | Cobalt Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A2 | 27.06 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0790" | 0.0790" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A85 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0795" | 0.0795" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A172 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0795" | 0.0795" | Cobalt Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A21 | 27.06 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0795" | 0.0795" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A86 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0800" | 0.0800" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A173 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0800" | 0.0800" | Cobalt Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A22 | 27.06 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0800" | 0.0800" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A87 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0805" | 0.0805" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A174 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0805" | 0.0805" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A88 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0815" | 0.0815" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A175 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0815" | 0.0815" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A91 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0825" | 0.0825" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A176 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0825" | 0.0825" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A93 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0830" | 0.0830" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A177 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0830" | 0.0830" | Cobalt Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A23 | 27.06 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0830" | 0.0830" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A94 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0835" | 0.0835" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A178 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0835" | 0.0835" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A95 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0840" | 0.0840" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A179 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0840" | 0.0840" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A96 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0845" | 0.0845" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A181 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0845" | 0.0845" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A97 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0850" | 0.0850" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A182 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0850" | 0.0850" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A98 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0855" | 0.0855" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A183 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0855" | 0.0855" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A99 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0865" | 0.0865" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A184 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0865" | 0.0865" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A102 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0870" | 0.0870" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A185 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0870" | 0.0870" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A103 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0875" | 0.0875" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A186 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0875" | 0.0875" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A104 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0880" | 0.0880" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A187 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0880" | 0.0880" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A105 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0885" | 0.0885" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A188 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0885" | 0.0885" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A106 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0895" | 0.0895" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A189 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0895" | 0.0895" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A108 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0900" | 0.0900" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A191 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0900" | 0.0900" | Cobalt Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A24 | 27.18 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0900" | 0.0900" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A109 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0905" | 0.0905" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A192 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0905" | 0.0905" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A111 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0910" | 0.0910" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A193 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0910" | 0.0910" | Cobalt Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A25 | 28.82 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0910" | 0.0910" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A112 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0915" | 0.0915" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A194 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0915" | 0.0915" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A113 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0920" | 0.0920" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A195 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0920" | 0.0920" | Cobalt Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A26 | 27.55 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0920" | 0.0920" | Carbide | 5/8" | 2 1/4" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A114 | 32.32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.0925" | 0.0925" | High-Speed Steel | 3/4" | 3" | 4 | __ | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A196 | 18.42 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Spiral Flutes—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Morse Taper Shank
These reamers work with machine tools that have a Morse taper spindle hole, such as a drill press or lathe.
Square Shank
Threaded Shank with Built-In Pilot
These reamers fit power drills that have a 1/4"-28 threaded spindle or adapter. Using a powered hand tool can affect alignment, so these have a built-in pilot that guides the reamer into the hole and keeps it straight.
Arbor Mount
Reamer Shown Installed on Arbor (Sold Separately)
Pair these reamers with a compatible arbor (sold separately) to mount to your drill press or other machine. This setup lets you ream larger holes than other shank types. They’re also known as shell reamers.
Expansion Reamers
Unlike standard reamers, which are unusable once they become worn, these can be returned to their original size for finishing holes. After the reamer is worn down, tighten the set screw to expand the diameter, grind the reamer to its original size, and get back to work.
These are not designed for producing holes larger than the listed diameter or for producing holes of various sizes. The set screw should not be loosened.
These are not designed for producing holes larger than the listed diameter or for producing holes of various sizes. The set screw should not be loosened.
Material
- High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
- Carbide-Tipped Steel—Since these reamers retain a sharper, harder edge at higher temperatures than high-speed steel and cobalt steel, they can be used on hard materials, such as iron, hardened steel, and steel alloys. They aren't as brittle as solid carbide reamers, so they can be used in less rigid setups, such as a hand-held drill.
Round Shank
These reamers fit in the chuck of drill presses, turret lathes, and other machine and power tools, making them the most common shank type.
Square Shank
Adjustable-Size Reamers
Finish multiple hole sizes with one reamer by moving the adjustable blades within the diameter range. Convenient for maintenance work, these have large diameter range and don't require powered tools. They're often used to make precise size adjustments during installation of bearings and bushings.
Move the blades by tightening and loosening the two nuts on the reamer. To measure size, adjust blades to a known size (such as a bushing or ring), or measure across two opposite blades with a micrometer. When the blades become worn, they can be reground or replaced.
Move the blades by tightening and loosening the two nuts on the reamer. To measure size, adjust blades to a known size (such as a bushing or ring), or measure across two opposite blades with a micrometer. When the blades become worn, they can be reground or replaced.
Material
- High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
- Steel—Typically more economical but less durable than high-speed steel, these are for general purpose reaming.
Square Shank
Hole-Alignment Reamers
Enlarge holes to correct misalignment and overlap. Misaligned holes often have a narrow entry, so the tapered shape is easier to insert and makes more contact to remove the overlapping material. These are also known as bridge and car reamers.
Material
- High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
Round Shank
These reamers fit in the chuck of drill presses, turret lathes, and other machine and power tools, making them the most common shank type.
Round Shank with Safety Collar
A collar on the shank prevents these reamers from going too deep into material, protecting your tool's chuck from damage. With a round shank, the most common shank type, they fit in the chuck of drill presses, turret lathes, and other machine and power tools.
Morse Taper Shank
These reamers work with machine tools that have a Morse taper spindle hole, such as a drill press or lathe.
Hex Shank
The shank fits hex impact sockets, so you can use an impact wrench to both ream the hole and install a fastener.
Hex Shank with Safety Magnets
These reamers have magnets on the hex nut to keep them from accidentally falling out of your tool. They fit hex impact sockets, so you can use an impact wrench to both ream the hole and install a fastener.
Adjustable-Size Hole-Alignment Reamers
One tool both finishes multiple diameters and enlarges holes to correct misalignment and overlap. Also known as bridge, and car reamers, they have a tapered shape that fits into the narrow entry of misaligned holes and makes more contact to remove the overlapping material. Change the reamer size by moving the adjustable blades within the diameter range.
Move the blades by tightening and loosening the two nuts on the reamer. To measure size, adjust blades to a known size (such as a bushing or ring), or measure across two opposite blades with a micrometer. When the blades become worn, they can be reground or replaced.
Move the blades by tightening and loosening the two nuts on the reamer. To measure size, adjust blades to a known size (such as a bushing or ring), or measure across two opposite blades with a micrometer. When the blades become worn, they can be reground or replaced.
Material
- Steel—Typically more economical but less durable than high-speed steel, these are for general purpose reaming.
Square Shank with Built-In Pilot
A built-in pilot guides and steadies these reamers through holes that are spaced far apart. Turn the reamer by hand with an adjustable wrench or straight-handle tap wrench.
Deburring Reamers
Smooth the inside and edges of holes with these reamers. Often used to finish holes in sheet metal or to remove burrs from the ends of cut pipe and conduit, they're also known as repairmen's reamers.
Material
- High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
- Steel—Typically more economical but less durable than high-speed steel, these are for general purpose reaming.
Round Shank
These reamers fit in the chuck of drill presses, turret lathes, and other machine and power tools, making them the most common shank type.
T-Handle Shank
No additional tools required, these reamers have an integrated handle that's easy to grip and turn.
L-Handle Shank
Turn these reamers with the long ratcheting handle, which provides more leverage than a T-handle.
Taper-Pipe Reamers
Use these reamers to shape and finish a hole to a tapered pipe size before tapping.
Material
- High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
For technical drawings and 3-D models, click on a part number.Square Shank
Reamers for Dowel-Pin Holes
Finish holes to match standard fractional dowel pin sizes. These reamers are undersized with a very slight taper to ensure dowel pins fit snugly when installed.
Material
- High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
- Cobalt Steel—With better heat and wear resistance than high-speed steel, these reamers run up to 25% faster, last longer, and perform better on hard materials, such as cast iron, hardened steel, titanium, and stainless steel.
- Carbide—For the highest level of accuracy when cutting hard materials, these are our hardest, strongest, and most wear-resistant reamers. They're used on materials such as iron, hardened steel, steel alloys, and plastic. Their hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the reamer from breaking.
For technical drawings and 3-D models, click on a part number.Round Shank
These reamers fit in the chuck of drill presses, turret lathes, and other machine and power tools, making them the most common shank type.
Reamers for Taper-Pin Holes
Shape holes to match the profile of taper pins. After drilling a hole that matches the size of the small end of the taper pin you want to install, use these reamers to taper and finish the hole.
Material
- High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
For technical drawings and 3-D models, click on a part number.Round Shank
These reamers fit in the chuck of drill presses, turret lathes, and other machine and power tools, making them the most common shank type.
Square Shank
Reamers for Morse Taper-Socket Holes
Use these reamers to turn straight holes into Morse taper socket holes that can hold cutting tools or adapters in machine spindles. They're also good for finishing existing Morse taper holes and removing nicks and burs from spindles.
Material
- High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
For technical drawings and 3-D models, click on a part number.Square Shank
Reamer Sets
Keep a variety of reamer sizes on hand for finishing holes.
Material
- High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
For technical drawings and 3-D models, click on a part number.Round Shank
With Metal Case (29 Pieces)
With Wood Case (29 Pieces)
With Roll Pouch
With Wood Case (13 Pieces)
With Metal Case (25 Pieces)
With Metal Case (20 Pieces)
With Metal Case (60 Pieces)
These reamers fit in the chuck of drill presses, turret lathes, and other machine and power tools, making them the most common shank type.
Undersized/Oversized Fractional Reamer Sets
Create a tighter or looser fit than standard sizes with reamers that are under- or oversized by 0.001" in diameter. These sets include a variety of reamer sizes for finishing holes.
Material
- High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
- Cobalt Steel—With better heat and wear resistance than high-speed steel, these reamers run up to 25% faster, last longer, and perform better on hard materials, such as cast iron, hardened steel, titanium, and stainless steel.
For technical drawings and 3-D models, click on a part number.Round Shank
Wood Case
Roll Pouch
These reamers fit in the chuck of drill presses, turret lathes, and other machine and power tools, making them the most common shank type.
Adjustable-Size Reamer Sets
Work on a wide range of hole diameters by keeping a set of adjustable reamers on hand. Each reamer can finish multiple hole sizes by moving the adjustable blades within the diameter range. Convenient for maintenance work, these don't require powered tools. They're often used to make precise size adjustments during installation of bearings and bushings.
Move the blades by tightening and loosening the two nuts on the reamer. To measure size, adjust blades to a known size (such as a bushing or ring), or measure across two opposite blades with a micrometer. When the blades become worn, they can be reground or replaced.
Move the blades by tightening and loosening the two nuts on the reamer. To measure size, adjust blades to a known size (such as a bushing or ring), or measure across two opposite blades with a micrometer. When the blades become worn, they can be reground or replaced.
Material
- High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
- Steel—Typically more economical but less durable than high-speed steel, these are for general purpose reaming.
Square Shank
7-Piece Set
10-Piece Set
8-Piece Set
11-Piece Set
Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench.
Drill-Length Reamer Sets
The same length as jobbers' drill bits, these reamers save setup time when you want to drill and ream on the same machine, such as a drill press or bench lathe. These sets include a variety of sizes to precisely finish holes.
Material
- High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
For technical drawings and 3-D models, click on a part number.Round Shank
13-Piece Set
29-Piece Set
26-Piece Set
60-Piece Set
15-Piece Set
These reamers fit in the chuck of drill presses, turret lathes, and other machine and power tools, making them the most common shank type.
Reamer Sets for Dowel-Pin Holes
Finish holes to match standard fractional dowel pin sizes. These sets include two reamers for each size within the range listed. One reamer is slightly below the size while the other is slightly above the size, so you can choose how snug your dowel pin will fit in the hole.
Material
- High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
- Cobalt Steel—With better heat and wear resistance than high-speed steel, these reamers run up to 25% faster, last longer, and perform better on hard materials, such as cast iron, hardened steel, titanium, and stainless steel.
For technical drawings and 3-D models, click on a part number.Round Shank
14-Piece Set
These reamers fit in the chuck of drill presses, turret lathes, and other machine and power tools, making them the most common shank type.
Reamer Sets for Taper-Pin Holes
Used for shaping holes to match the profile of taper pins, these sets include a variety of reamer sizes. Drill a hole that matches the size of the small end of the taper pin you want to install, and then ream to taper and finish the hole.
Material
- High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
For technical drawings and 3-D models, click on a part number.Square Shank
7-Piece Set
6-Piece Set
11-Piece Set
Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench.