System of Measurement System of Measurement |
|---|
|
Reamer Diameter Reamer Diameter | Show |
|---|
|
Reamer Diameter Reamer Diameter | Hide |
|---|
Material Material |
|---|
|
For Use On For Use On |
|---|
|
|
Reamer Type Reamer Type |
|---|
|
Diameter Rating Diameter Rating |
|---|
|
Cut Direction Cut Direction |
|---|
|
Spiral Direction Spiral Direction |
|---|
|
Pilot Diameter Pilot Diameter |
|---|
|
Pilot Length Pilot Length |
|---|
|
Thread Size Thread Size |
|---|
|
Size Size |
|---|
|
Maximum Drilling Depth Maximum Drilling Depth |
|---|
|
About Reamers
More
High-Speed Steel Round-Shank Reamers
The shank diameter is slightly smaller than the reamer diameter.
Straight-flute reamers are for general purpose cutting.
Spiral-flute reamers have a right-hand spiral and a right-hand cut. They pull chips upward as they cut, so they’re often used in blind holes. Spiral flutes create a smoother finish than straight flutes and work well in keyways and other applications with an interrupted cut.
Lg. | |||||||
|---|---|---|---|---|---|---|---|
| Reamer Dia. | Flute | Overall | Number of Flutes | Cutting Dia. Tolerance | For Use On | Each | |
Straight Flute | |||||||
| 0.2188" | 1 1/4" | 5" | 6 | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 |
Lg. | Direction | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Reamer Dia. | Flute | Overall | Number of Flutes | Spiral | Cut | Cutting Dia. Tolerance | For Use On | Each | |
Spiral Flute | |||||||||
| 0.2188" | 1 1/4" | 5" | 6 | Right Hand | Right Hand | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 |
Carbide Round-Shank Reamers
Solid carbide provides exceptional wear resistance and high accuracy in addition to excellent abrasion and heat resistance when cutting hard and abrasive materials. These reamers require rigid tool holding to prevent breakage and are not for use with hand-held tools.
Dia. | Lg. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Reamer | Shank | Flute | Overall | Number of Flutes | Flute Style | Cutting Dia. Tolerance | For Use On | Each | |
| 0.2188" | 7/32" | 1" | 3" | 4 | Straight | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 000000 |
Cobalt Steel Round-Shank Reamers
Choose these cobalt steel reamers for good performance on hard-to-machine materials. The shank diameter is slightly smaller than the reamer diameter.
Lg. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Reamer Dia. | Flute | Overall | Number of Flutes | Flute Style | Cutting Dia. Tolerance | For Use On | Each | |
Cobalt Steel | ||||||||
| 0.2188" | 1 1/4" | 5" | 6 | Straight | 0" to 0.0002 | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 000000 |
Carbide-Tipped Round-Shank Reamers
These reamers are carbide-tipped tool steel for excellent abrasion and heat resistance when cutting hard and abrasive materials. The shank diameter is slightly smaller than the reamer diameter.
Lg. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Reamer Dia. | Flute | Overall | Number of Flutes | Flute Style | Cutting Dia. Tolerance | For Use On | Each | |
Carbide-Tipped Tool Steel | ||||||||
| 0.2188" | 1 1/4" | 5" | 4 | Straight | 0" to 0.0003 | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 000000 |
Threaded-Shank Reamers
These reamers have a 1/4”-28 threaded shank. All have a built-in pilot with a 45° chamfer angle to maintain alignment in the hole.
Dia. | Lg. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Reamer | Pilot | Flute | Pilot | Overall | Number of Flutes | Flute Style | Cutting Dia. Tolerance | Pilot Cutting Dia. Tolerance | For Use On | Each | |
High-Speed Steel | |||||||||||
| 0.2188" | 0.207" | 1 1/8" | 0.250" | 2 3/8" | 6 | Straight | 0" to 0.0002" | -0.001", +0.000" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 |
Round-Shank Drill Reamers
Drill and finish holes in a single pass with these dual-purpose tools. The tapered tip gradually pierces your material to reduce friction, and the straight flutes make clean cuts without chipping or peeling the edge of the hole. Made from solid carbide, these drill reamers are strong and heat resistant. The flutes stay sharp even when cutting abrasive materials such as fiberglass, carbon fiber, and graphite. Use them in drill presses or other machines—carbide is brittle, and will break if used to drill by hand.
Dia. | Lg. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Reamer | Shank | Max. Drilling Dp. | Flute | Overall | Number of Flutes | Flute Style | Cutting Dia. Tolerance | For Use On | Each | |
Carbide | |||||||||||
Inch | |||||||||||
| 7/32" | 0.2188" | 0.219" | 2.13" | 2 1/8" | 4" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 0000000 |