Filter by
Reamer Diameter
System of Measurement
Reamer Size
For Use On
Flute Style
Shank Type
Material
Reamer Type
Number of Flutes
Overall Length
Flute Length
DFARS (Defense Acquisition Regulations System)
Shank Diameter
Reach Length
Reamers
Enlarge holes to exact inch, metric, wire gauge, or letter sizes. Reamers also smooth the walls of holes. Note: Never rotate the reamer in the reverse direction of the cut. This will ruin its accuracy.
For technical drawings and 3-D models, click on a part number.Round Shank
The most common shank type, it fits in the chuck of drill presses, turret lathes, and other machine and power tools. Also known as chucking reamers.
Use high-speed steel reamers for general purpose reaming on a wide variety of materials.
Cobalt steel reamers offer better heat and abrasion resistance than high-speed steel reamers to run up to 25% faster for a longer tool life. They're commonly used on hard-to-machine materials such as nickel alloys, stainless steel, and titanium.
Carbide reamers are harder, stronger, and more wear resistant than carbide-tipped reamers for the highest accuracy. Use on hard and abrasive materials such as cast iron, nonferrous alloys, plastic, and hardened steel. Not for use with hand-held tools, they require rigid tool holding to prevent breakage.
The most common shank type, it fits in the chuck of drill presses, turret lathes, and other machine and power tools. Also known as chucking reamers.
Reamer Size | Reamer Diameter | Material | Flute Length | Overall Length | Number of Flutes | Cutting Diameter Tolerance | For Use On | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Straight flutes are used for general purpose cutting. Since chips are forced forward into the hole, they perform best in through-hole applications. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.2485" | 0.2485" | High-Speed Steel | 1 1/2" | 6" | 6 | 0" to 0.0002" | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 8803A478 | $27.80 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.2485" | 0.2485" | Cobalt Steel | 1 1/2" | 6" | 6 | 0" to 0.0002" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8324A76 | 41.66 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.2485" | 0.2485" | Carbide | 1" | 3" | 4 | 0" to 0.0002" | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 8307A478 | 74.18 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||