McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    135 Products

    Reamers
    3D CAD models available

    Finish holes to precise inch, metric, wire gauge, or letter sizes with these reamers.
    Round Shank
    These reamers fit in the chuck of drill presses, turret lathes, and other machine and power tools, making them the most common shank type.
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Right-Hand Spiral—These reamers pull chips upward as they cut, so they're often used in blind holes.
    Length
    Reamer Diameter
    Material
    Flute
    Overall
    Number
    of Flutes
    Spiral
    Direction
    Cutting Diameter
    Tolerance
    For Use On
    Each
    Straight Flute
     
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers, Round Shank, Straight Flute.
    Wire Gauge
    0.0135" (80 Ga.)High-Speed Steel3/8"3/4"2__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel00000000000000
    0.0145" (79 Ga.)High-Speed Steel3/8"3/4"2__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0160" (78 Ga.)High-Speed Steel3/8"7/8"2__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0180" (77 Ga.)High-Speed Steel3/8"7/8"2__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0200" (76 Ga.)High-Speed Steel3/8"7/8"2__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0210" (75 Ga.)High-Speed Steel1/2"1"3__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0225" (74 Ga.)High-Speed Steel1/2"1"3__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0240" (73 Ga.)High-Speed Steel1/2"1 1/8"3__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0250" (72 Ga.)High-Speed Steel1/2"1 1/8"3__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0260" (71 Ga.)High-Speed Steel1/2"1 1/4"3__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0280" (70 Ga.)High-Speed Steel1/2"1 1/4"3__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0292" (69 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0310" (68 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0320" (67 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0330" (66 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0350" (65 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0360" (64 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0370" (63 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0380" (62 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0390" (61 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0400" (60 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0410" (59 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0420" (58 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0430" (57 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0465" (56 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0520" (55 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0550" (54 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0595" (53 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0635" (52 Ga.)High-Speed Steel1/2"2 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0670" (51 Ga.)High-Speed Steel3/4"3"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0700" (50 Ga.)High-Speed Steel3/4"3"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0730" (49 Ga.)High-Speed Steel3/4"3"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0760" (48 Ga.)High-Speed Steel3/4"3"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0785" (47 Ga.)High-Speed Steel3/4"3"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0810" (46 Ga.)High-Speed Steel3/4"3"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0820" (45 Ga.)High-Speed Steel3/4"3"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0860" (44 Ga.)High-Speed Steel3/4"3"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0890" (43 Ga.)High-Speed Steel3/4"3"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0935" (42 Ga.)High-Speed Steel3/4"3"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0960" (41 Ga.)High-Speed Steel7/8"3 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0980" (40 Ga.)High-Speed Steel7/8"3 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.0995" (39 Ga.)High-Speed Steel7/8"3 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1015" (38 Ga.)High-Speed Steel7/8"3 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1040" (37 Ga.)High-Speed Steel7/8"3 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1065" (36 Ga.)High-Speed Steel7/8"3 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1100" (35 Ga.)High-Speed Steel7/8"3 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1110" (34 Ga.)High-Speed Steel7/8"3 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1130" (33 Ga.)High-Speed Steel7/8"3 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1160" (32 Ga.)High-Speed Steel7/8"3 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1200" (31 Ga.)High-Speed Steel7/8"3 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1285" (30 Ga.)High-Speed Steel7/8"3 1/2"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1360" (29 Ga.)High-Speed Steel1"4"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1405" (28 Ga.)High-Speed Steel1"4"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1440" (27 Ga.)High-Speed Steel1"4"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1470" (26 Ga.)High-Speed Steel1"4"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1495" (25 Ga.)High-Speed Steel1"4"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1520" (24 Ga.)High-Speed Steel1"4"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1540" (23 Ga.)High-Speed Steel1"4"4__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1570" (22 Ga.)High-Speed Steel1"4"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1590" (21 Ga.)High-Speed Steel1 1/8"4 1/2"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1610" (20 Ga.)High-Speed Steel1 1/8"4 1/2"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1660" (19 Ga.)High-Speed Steel1 1/8"4 1/2"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1695" (18 Ga.)High-Speed Steel1 1/8"4 1/2"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1730" (17 Ga.)High-Speed Steel1 1/8"4 1/2"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1770" (16 Ga.)High-Speed Steel1 1/8"4 1/2"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1800" (15 Ga.)High-Speed Steel1 1/8"4 1/2"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1820" (14 Ga.)High-Speed Steel1 1/8"4 1/2"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1850" (13 Ga.)High-Speed Steel1 1/8"4 1/2"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1890" (12 Ga.)High-Speed Steel1 1/8"4 1/2"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1910" (11 Ga.)High-Speed Steel1 1/4"5"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1935" (10 Ga.)High-Speed Steel1 1/4"5"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1960" (9 Ga.)High-Speed Steel1 1/4"5"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.1990" (8 Ga.)High-Speed Steel1 1/4"5"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2010" (7 Ga.)High-Speed Steel1 1/4"5"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2040" (6 Ga.)High-Speed Steel1 1/4"5"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2055" (5 Ga.)High-Speed Steel1 1/4"5"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2090" (4 Ga.)High-Speed Steel1 1/4"5"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2130" (3 Ga.)High-Speed Steel1 1/4"5"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2210" (2 Ga.)High-Speed Steel1 1/2"6"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
    0.2280" (1 Ga.)High-Speed Steel1 1/2"6"6__0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel000000000000
     
    Spiral Flute
     
    Image of Product. Front orientation. Contains Annotated. Reamers. Reamers, Round Shank, Spiral Flute.
    Wire Gauge
    0.0400" (60 Ga.)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0410" (59 Ga.)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0420" (58 Ga.)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0430" (57 Ga.)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0465" (56 Ga.)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0520" (55 Ga.)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0550" (54 Ga.)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0595" (53 Ga.)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0635" (52 Ga.)High-Speed Steel1/2"2 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0670" (51 Ga.)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0700" (50 Ga.)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0730" (49 Ga.)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0785" (47 Ga.)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0810" (46 Ga.)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0820" (45 Ga.)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0860" (44 Ga.)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0890" (43 Ga.)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0935" (42 Ga.)High-Speed Steel3/4"3"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0960" (41 Ga.)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0980" (40 Ga.)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.0995" (39 Ga.)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1040" (37 Ga.)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1100" (35 Ga.)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1130" (33 Ga.)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1160" (32 Ga.)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1200" (31 Ga.)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1285" (30 Ga.)High-Speed Steel7/8"3 1/2"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1360" (29 Ga.)High-Speed Steel1"4"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1440" (27 Ga.)High-Speed Steel1"4"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1470" (26 Ga.)High-Speed Steel1"4"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1520" (24 Ga.)High-Speed Steel1"4"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1540" (23 Ga.)High-Speed Steel1"4"4Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1570" (22 Ga.)High-Speed Steel1"4"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1590" (21 Ga.)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1610" (20 Ga.)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1660" (19 Ga.)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1695" (18 Ga.)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1770" (16 Ga.)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1800" (15 Ga.)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1820" (14 Ga.)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1850" (13 Ga.)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1890" (12 Ga.)High-Speed Steel1 1/8"4 1/2"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1910" (11 Ga.)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1935" (10 Ga.)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1960" (9 Ga.)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.1990" (8 Ga.)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.2010" (7 Ga.)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.2040" (6 Ga.)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.2090" (4 Ga.)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.2130" (3 Ga.)High-Speed Steel1 1/4"5"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
    0.2280" (1 Ga.)High-Speed Steel1 1/2"6"6Right Hand0" to 0.0002"Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel0000000000000
     

    Reamer Sets
    3D CAD models available

    Keep a variety of reamer sizes on hand for finishing holes.
    Round Shank
    Image of Product. Front orientation. Reamers. Reamer Sets, Round Shank.
    These reamers fit in the chuck of drill presses, turret lathes, and other machine and power tools, making them the most common shank type.
    Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Jobbers' Length—The same length as jobbers' drill bits, these reamers save setup time when you want to drill and ream on the same machine, such as a drill press or bench lathe.
    back to top