Size Size |
---|
Decimal Size Equivalent Decimal Size Equivalent |
---|
Shank Type Shank Type |
---|
![]() | SDS Plus |
![]() | Round |
![]() | Threaded Hub |
For Use On For Use On |
---|
|
Bit Style Bit Style |
---|
![]() | Spiral Flute |
![]() | Hollow |
Finish Finish |
---|
|
Shank Size Shank Size |
---|
|
|
|
More
More
More
When you encounter rebar, stop drilling and mount one of these bits in your tool. Drill through the rebar, and then resume drilling with your masonry drill bit. The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers set to rotary-only mode. These bits cannot be used with SDS-Max-drive rotary hammers. Do not use in hammering applications.
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Shank Type | Point Style | Specifications Met | For Use On | Each | |
Inch | |||||||||
---|---|---|---|---|---|---|---|---|---|
Uncoated Carbide-Tipped Steel | |||||||||
3/8" | 0.375" | 8" | 6" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
3/8" | 0.375" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
7/16" | 0.4375" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
1/2" | 0.5" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
1/2" | 0.5" | 18" | 16" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
9/16" | 0.5625" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
5/8" | 0.625" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
5/8" | 0.625" | 18" | 16" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
11/16" | 0.6875" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
3/4" | 0.75" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
3/4" | 0.75" | 18" | 16" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
3/4" | 0.75" | 24" | 22" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
13/16" | 0.8125" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
7/8" | 0.875" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
1" | 1" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
1 1/8" | 1.125" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
1 1/4" | 1.25" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
1 3/8" | 1.375" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
1 1/2" | 1.5" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
When you encounter rebar, stop drilling and mount one of these bits in your tool. Drill through the rebar, and then resume drilling with your masonry drill bit. These bits drill holes using rotary action only and should not be used in hammering applications. Use with handheld power drills, drill presses, and in hammer drills set to rotary-only mode.
Shank | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Specifications Met | For Use On | Each | |
Inch | ||||||||||
Uncoated Carbide-Tipped Steel | ||||||||||
3/8" | 0.375" | 8" | 6" | Round | 5/16" | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
1/2" | 0.5" | 12" | 10" | Round | 3/8" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
1/2" | 0.5" | 18" | 16" | Round | 3/8" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
9/16" | 0.5625" | 12" | 10" | Round | 3/8" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
5/8" | 0.625" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
5/8" | 0.625" | 18" | 16" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
11/16" | 0.6875" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
3/4" | 0.75" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
3/4" | 0.75" | 18" | 16" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
3/4" | 0.75" | 24" | 22" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
13/16" | 0.8125" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
7/8" | 0.875" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
1" | 1" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
1 1/8" | 1.125" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
1 1/4" | 1.25" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
1 3/8" | 1.375" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
1 1/2" | 1.5" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
Use these diamond-coated hollow bits for wet drilling of masonry, concrete, and rebar with a drilling rig. They're not for dry drilling or use with portable electric drills or grinders. The size listed is the bit’s OD.
Adapters let you use your bit on a drilling rig with a different thread size.
Shank | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Decimal Size Equivalent | Bit ID | Overall Lg. | Max. Drilling Dp. | Thread Size | Type | Size | Point Style | Specifications Met | For Use On | Each | |
Diamond-Coated Steel | ||||||||||||
1" | 1" | 3/4" | 15 1/2" | 13" | 5/8"-11 | Threaded Hub | 1" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 0000000 |
1 1/8" | 1.125" | 1" | 15 1/2" | 13" | 5/8"-11 | Threaded Hub | 1 1/8" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
1 1/4" | 1.25" | 1" | 15 1/2" | 13" | 5/8"-11 | Threaded Hub | 1 1/4" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
1 3/8" | 1.375" | 1 1/4" | 15 1/2" | 13" | 5/8"-11 | Threaded Hub | 1 3/8" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
1 1/2" | 1.5" | 1 1/4" | 15 1/2" | 13" | 5/8"-11 | Threaded Hub | 1 1/2" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
1 3/4" | 1.75" | 1 1/2" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 1 3/4" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
2" | 2" | 1 3/4" | 16 1/2" | 14" | 1 1/4"-7 | Threaded Hub | 2" | Standard | __ | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
2 1/4" | 2.25" | 2" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 2 1/4" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
2 1/2" | 2.5" | 2 1/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 2 1/2" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
2 3/4" | 2.75" | 2 1/2" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 2 3/4" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
3" | 3" | 2 3/4" | 16 1/2" | 14" | 1 1/4"-7 | Threaded Hub | 3" | Standard | __ | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
3 1/2" | 3.5" | 3 1/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 3 1/2" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
4" | 4" | 3 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 4" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
4 1/2" | 4.5" | 4 1/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 4 1/2" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
5" | 5" | 4 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 5" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
6" | 6" | 5 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 6" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
7" | 7" | 6 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 7" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
8" | 8" | 7 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 8" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
10" | 10" | 9 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 10" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
12" | 12" | 11 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 12" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
Overall Lg. | Male Thread Size | Female Thread Size | For Drill Bit Shank Type | Each | |
5 3/8" | 5/8"-11 | 1 1/4"-7 | Threaded Hub | 0000000 | 0000000 |
Adapt a bit for use on a drilling rig with a different thread size.
Overall Length | Male Thread Size | Female Thread Size | For Drill Bit Shank Type | Each | |
5 3/8" | 5/8"-11 | 1 1/4"-7 | Threaded Hub | 0000000 | 0000000 |