Shank Type Shank Type |
|---|
 | SDS Plus |
 | Round |
 | Threaded Hub |
Size Size |
|---|
Decimal Size Equivalent Decimal Size Equivalent |
|---|
For Use On For Use On |
|---|
|
Bit Style Bit Style |
|---|
 | Spiral Flute |
 | Hollow |
Finish Finish |
|---|
|
Shank Size Shank Size |
|---|
|
|
|
For Cutting For Cutting |
|---|
|
Bit ID Bit ID |
|---|
|
|
|
For Maximum Soft Steel Diameter For Maximum SoftSteel Diameter |
|---|
|
|
Opening Style Opening Style |
|---|
|
For Maximum Soft Steel Hardness For Maximum SoftSteel Hardness |
|---|
|
For Maximum Hard Steel Hardness For Maximum HardSteel Hardness |
|---|
|
About Masonry Drill Bits
More
Drill Bit Decimal Size Equivalents
More
About Drill Bits
More
SDS-Plus-Shank Masonry Drill Bits for Rebar-Cutting
When you encounter rebar, stop drilling and mount one of these bits in your tool. Drill through the rebar, and then resume drilling with your masonry drill bit. The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers set to rotary-only mode. These bits cannot be used with SDS-Max-drive rotary hammers. Do not use in hammering applications.
| Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Shank Type | Point Style | Specifications Met | For Use On | Each | |
Inch | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Uncoated Carbide-Tipped Steel | |||||||||
| 3/8" | 0.375" | 8" | 6" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
| 1/2" | 0.5" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 1/2" | 0.5" | 18" | 16" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 9/16" | 0.5625" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 5/8" | 0.625" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 5/8" | 0.625" | 18" | 16" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 11/16" | 0.6875" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 3/4" | 0.75" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 3/4" | 0.75" | 18" | 16" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 3/4" | 0.75" | 24" | 22" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 13/16" | 0.8125" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 7/8" | 0.875" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 1" | 1" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 1 1/8" | 1.125" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
| 1 1/4" | 1.25" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
| 1 3/8" | 1.375" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
| 1 1/2" | 1.5" | 12" | 10" | SDS Plus | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
Round-Shank Masonry Drill Bits for Rebar-Cutting
When you encounter rebar, stop drilling and mount one of these bits in your tool. Drill through the rebar, and then resume drilling with your masonry drill bit. These bits drill holes using rotary action only and should not be used in hammering applications. Use with handheld power drills, drill presses, and in hammer drills set to rotary-only mode.
Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Specifications Met | For Use On | Each | |
Inch | ||||||||||
Uncoated Carbide-Tipped Steel | ||||||||||
| 3/8" | 0.375" | 8" | 6" | Round | 5/16" | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
| 1/2" | 0.5" | 12" | 10" | Round | 3/8" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 1/2" | 0.5" | 18" | 16" | Round | 3/8" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 9/16" | 0.5625" | 12" | 10" | Round | 3/8" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 5/8" | 0.625" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 5/8" | 0.625" | 18" | 16" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 11/16" | 0.6875" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 3/4" | 0.75" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 3/4" | 0.75" | 18" | 16" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 3/4" | 0.75" | 24" | 22" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 13/16" | 0.8125" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 7/8" | 0.875" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 1" | 1" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 00000 |
| 1 1/8" | 1.125" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
| 1 1/4" | 1.25" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
| 1 3/8" | 1.375" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
| 1 1/2" | 1.5" | 12" | 10" | Round | 1/2" | Standard | ANSI Standards | Rebar | 00000000 | 000000 |
Masonry Drill Bits for Drilling Rigs
Use these diamond-coated hollow bits for wet drilling of masonry, concrete, and rebar with a drilling rig. They're not for dry drilling or use with portable electric drills or grinders. The size listed is the bit’s OD.
Adapters let you use your bit on a drilling rig with a different thread size.
Shank | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Decimal Size Equivalent | Bit ID | Overall Lg. | Max. Drilling Dp. | Thread Size | Type | Size | Point Style | Specifications Met | For Use On | Each | |
Diamond-Coated Steel | ||||||||||||
| 1" | 1" | 3/4" | 15 1/2" | 13" | 5/8"-11 | Threaded Hub | 1" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 0000000 |
| 1 1/8" | 1.125" | 1" | 15 1/2" | 13" | 5/8"-11 | Threaded Hub | 1 1/8" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 1 1/4" | 1.25" | 1" | 15 1/2" | 13" | 5/8"-11 | Threaded Hub | 1 1/4" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 1 3/8" | 1.375" | 1 1/4" | 15 1/2" | 13" | 5/8"-11 | Threaded Hub | 1 3/8" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 1 1/2" | 1.5" | 1 1/4" | 15 1/2" | 13" | 5/8"-11 | Threaded Hub | 1 1/2" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 1 3/4" | 1.75" | 1 1/2" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 1 3/4" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 2" | 2" | 1 3/4" | 16 1/2" | 14" | 1 1/4"-7 | Threaded Hub | 2" | Standard | __ | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 2 1/4" | 2.25" | 2" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 2 1/4" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 2 1/2" | 2.5" | 2 1/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 2 1/2" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 2 3/4" | 2.75" | 2 1/2" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 2 3/4" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 3" | 3" | 2 3/4" | 16 1/2" | 14" | 1 1/4"-7 | Threaded Hub | 3" | Standard | __ | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 3 1/2" | 3.5" | 3 1/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 3 1/2" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 4" | 4" | 3 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 4" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 4 1/2" | 4.5" | 4 1/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 4 1/2" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 5" | 5" | 4 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 5" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 6" | 6" | 5 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 6" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 7" | 7" | 6 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 7" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 8" | 8" | 7 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 8" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 10" | 10" | 9 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 10" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 12" | 12" | 11 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 12" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| Overall Lg. | Male Thread Size | Female Thread Size | For Drill Bit Shank Type | Each | |
| 5 3/8" | 5/8"-11 | 1 1/4"-7 | Threaded Hub | 0000000 | 0000000 |
Thread Adapters for Masonry Drill Bits for Drilling Rigs
Adapt a bit for use on a drilling rig with a different thread size.
| Overall Length | Male Thread Size | Female Thread Size | For Drill Bit Shank Type | Each | |
| 5 3/8" | 5/8"-11 | 1 1/4"-7 | Threaded Hub | 0000000 | 0000000 |
Bolt, Hard Chain, and Padlock Cutters
With a short-nosed jaw, these cutters force the material being cut deeper into the jaw for maximum leverage. The short jaw also allows you to cut one side of a chain link or padlock hasp without hitting the other side. All cutters have an adjustment screw to align cutting edges. For more leverage, choose a cutter with a longer handle. Not for use on wire rope.
Cutters | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Dia. | Replacement Cutting Heads | ||||||||||||
| Soft Steel | Medium-Hard Steel | Hard Steel | Rebar | Hard Chain | Overall Lg. | Jaw Material | Handle Material | Grip Material | Opening Style | Each | Each | ||
| 5/16" | 5/16" | 5/16" | 5/16" | 5/16" | 24" | Steel | Steel | Rubber | Manual | 000000 | 0000000 | 000000 | 000000 |
| 7/16" | 7/16" | 7/16" | 7/16" | 7/16" | 36" | Steel | Steel | Rubber | Manual | 000000 | 000000 | 000000 | 000000 |
| 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 42" | Steel | Steel | Rubber | Manual | 000000 | 000000 | 000000 | 00 |
Bolt and Chain Cutters
Cut medium steel chain and hard steel bolts, rods, screws, rivets, nails, bars, wire, and rebar. All cutters have an adjustment screw to align cutting edges. For more leverage, choose a cutter with a longer handle. Not for use on wire rope.
Cutters | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Dia. | Replacement Cutting Heads | |||||||||||
| Soft Steel | Medium-Hard Steel | Hard Steel | Rebar | Overall Lg. | Jaw Material | Handle Material | Grip Material | Opening Style | Each | Each | ||
| 5/16" | 5/16" | 3/16" | 3/16" | 14" | Steel | Steel | Rubber | Manual | 0000000 | 0000000 | 0000000 | 000000 |
| 3/8" | 3/8" | 1/4" | 1/4" | 18" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 00000 |
| 7/16" | 7/16" | 5/16" | 5/16" | 24" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 00000 |
| 1/2" | 1/2" | 3/8" | 3/8" | 30" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 000000 |
| 9/16" | 9/16" | 7/16" | 7/16" | 36" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 000000 |
Bolt and Hard Chain Cutters
Cut hard bolts and up to Grade 70 chain with reinforced blades that stay aligned during repeat cuts. All cutters have an adjustment screw to align cutting edges. For more leverage, choose a cutter with a longer handle. Not for use on wire rope.
Cutters | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Dia. | Replacement Cutting Heads | ||||||||||||
| Soft Steel | Medium-Hard Steel | Hard Steel | Rebar | Hard Chain | Overall Lg. | Jaw Material | Handle Material | Grip Material | Opening Style | Each | Each | ||
| 7/16" | 7/16" | 5/16" | 5/16" | 5/16" | 24" | Steel | Steel | Rubber | Manual | 0000000 | 0000000 | 0000000 | 0000000 |
| 1/2" | 1/2" | 3/8" | 3/8" | 3/8" | 30" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 000000 |
| 9/16" | 9/16" | 7/16" | 7/16" | 7/16" | 36" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 000000 |
Electrical-Insulating Bolt and Chain Cutters
Insulated handles protect against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use to cut medium steel chain and hard steel bolts, rods, screws, rivets, nails, bars, and wire. Cutters have an adjustment screw to align cutting edges. Not for use on wire rope.
Bench-Mount Bolt, Hard Chain, and Padlock Cutters
Make repeated cuts in hard materials with this cutter. It mounts for stability and provides extra leverage. It has a short-nosed jaw that forces the material being cut deep into the jaw and also allows you to cut one side of a chain link or padlock hasp without hitting the other side. Align cutting edges with the adjustment screw. Not for use on wire rope.
Air-Powered Bolt and Chain Cutters
Slice through bolts and chain with low effort. A spring opens the jaws for quick cuts. Not for use on wire rope.
Cutters | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Dia. | Overall | Replacement Cutting Heads | ||||||||||||||||
| Soft Steel | Medium-Hard Steel | Hard Steel | Rebar | Hard Chain | Lg. | Ht. | Jaw Material | Grip Material | Air Pressure | For Air Hose ID | Air Hose Included | Thread Type | Pipe Size | Gender | Each | Each | ||
| 3/8" | 3/8" | 5/16" | 5/16" | 5/16" | 15" | 7 1/4" | Steel | Rubber | 80-120psi | 3/8" | No | NPT | 3/8 | Female | 0000000 | 000000000 | 0000000 | 0000000 |
| 1/2" | 1/2" | 3/8" | 3/8" | 3/8" | 17 1/2" | 10" | Steel | Rubber | 90-130psi | 3/8" | No | NPT | 3/8 | Female | 0000000 | 00000000 | 0000000 | 000000 |
Hydraulic-Assist Multipurpose Bolt,
Wire Rope, and Cable Cutters
Hydraulic-powered jaws cut bolts, wire rope, rods, and electrical cable with low effort and minimal material distortion. Blades can be sharpened and replaced.
Cutter rated for 20,000 volts has insulated handles.
Cutters | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Wire Rope Dia. | Replacement Cutting Blades | |||||||||||||
| Steel | Stainless Steel | For Max. Soft Steel Dia. | For Max. Steel-Reinforced Aluminum Cable Dia. | For Max. Data Cable Dia. | For Max. Rebar Dia. | Overall Lg. | Jaw Material | Handle Material | Grip Material | For Max. Voltage | Each | Each | ||
| 5/8" | 5/8" | 5/8" | 5/8" | 5/8" | 1/2" | 15" | Steel | Steel | Rubber | Not Rated | 0000000 | 000000000 | 0000000 | 0000000 |
| 3/4" | 3/4" | 11/16" | 3/4" | 3/4" | 1/2" | 15" | Steel | Steel | Rubber | 20,000 V | 0000000 | 00000000 | 0000000 | 000000 |
| 1" | 1" | 1 1/4" | 2" | 2" | 3/4" | 24" | Steel | Steel | Rubber | Not Rated | 0000000 | 00000000 | 0000000 | 000000 |
| 1 1/4" | 1 1/4" | 1 1/4" | 1 1/4" | 1 1/4" | 7/8" | 27" | Steel | Steel | Rubber | Not Rated | 0000000 | 00000000 | 0000000 | 000000 |
Rebar Benders
A long handle gives you the leverage to quickly bend metal.
Style C trims and bends rebar up to 5/8" dia. Bolt to a flat surface for added stability.
For Rebar | Mounting Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Trade Number | Dia. | No. of Heads | Max. Bending Angle | Handle Lg. | Material | Mounting Fasteners Included | No. of | Dia. | Each | |
| C | 3, 4, 5 | 3/8", 1/2", 5/8" | 1 | 180° | 52" | Steel | No | 4 | 5/8" | 0000000 | 0000000 |