These nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning and robotic-gripping applications. All have an aluminum base plate that adds strength, but is flexible enough to bend around a curve. Made of Buna-N, these bumpers resist abrasion, oil, and grease. They can be used outdoors, and all have a medium-hard rating to withstand high levels of impact.

Smooth bumpers distribute gripping force evenly, which makes them good for applications involving motion, such as conveyor belts.

Fine criscross bumpers have better grip on irregular surfaces than smooth bumpers.

Crisscross bumpers have good grip on rough and irregular surfaces, even if there’s debris.

Unthreaded-hole bumpers mount with screws.

Adhesive-back bumpers allow for easy installation.

Drill-your-own hole/glue-on bumpers require contact adhesive or drilling your own holes and mounting them with screws.

For technical drawings and 3-D models, click on a part number.

Install these bumpers with screws. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. All have a hard rating to withstand high levels of impact. They're also known as recessed bumpers.

Polyurethane bumpers have better abrasion resistance than SBR bumpers. They won't become brittle and crack when exposed to ozone, are nonmarking, and can be used outdoors.

Rubber bumpers have good abrasion resistance. They are nonmarking and can be used outdoors.

For technical drawings and 3-D models, click on a part number.

These bumpers are at a 90° angle to protect corners on equipment, walls, and docks from damage caused by carts, vehicles, and other moving objects. All have a hard rating to withstand high levels of impact. They are nonmarring and can be used outdoors.

Unthreaded-hole bumpers mount with screws. Plastic bumpers are chemical resistant. UV-resistant bumpers won’t dry out and become brittle when exposed to UV rays.

For technical drawings and 3-D models, click on a part number.

Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.

Felt bumpers protect surfaces from scuffs.

Plastic bumpers are chemical resistant and won't dry out and become brittle when exposed to UV rays.

Rubber bumpers are abrasion resistant.

Polyurethane bumpers have better abrasion resistance than rubber bumpers.

Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. All of these bumpers can be used outdoors.

Bumpers with an extra-hard, hard, and medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.

Neoprene bumpers have good abrasion resistance.

For technical drawings and 3-D models, click on a part number.

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Bumpers with a soft rating offer cushioning. Bumpers with a medium and medium-soft rating offer a balance of cushioning and impact resistance. The softer the bumper, the more it cushions. Bumpers with an extra-hard and medium-hard rating withstand higher levels of impact than softer bumpers. The harder the bumper, the more impact it withstands.

Polyurethane bumpers have good abrasion resistance. They're also nonmarking. Plastic bumpers are chemical resistant and won't dry out and become brittle when exposed to UV rays. They're also nonmarking. They are not for use outdoors.

Polyethylene foam bumpers cushion during impact and are nonmarking. They are not for use outdoors.

Silicone foam bumpers cushion during impact and withstand a wider range of temperatures than other bumpers. They are nonmarking and can be used outdoors.

For technical drawings and 3-D models, click on a part number.

Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

Bumpers with a hard and medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.

Polyurethane bumpers have better abrasion resistance than SBR bumpers. They won't become brittle and crack when exposed to ozone.

For technical drawings and 3-D models, click on a part number.