Also known as Pressure Class 150 flanges, these corrosion-resistant flanges are designed for low-pressure pipe applications.

These fittings are made to tighter tolerances than other stainless steel pipe fittings. They are also known as instrumentation fittings.

Use these heavy duty, corrosion-resistant fittings in high-pressure flow applications.

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings, but need more strength to handle higher pressures.

Bolt two same-size flanges together with a gasket to create an access point within a pipe line.

Also known as Schedule 10 fittings, these are thin, lightweight, and corrosion resistant.

These flanges are for low-pressure applications in noncorrosive environments.

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

A galvanized finish gives these fittings better corrosion resistance than our plain steel high-pressure fittings. Also known as Pressure Class 3000 fittings.

Made to tighter tolerances than other steel pipe fittings, these are also known as instrumentation fittings.

A galvanized finish gives these fittings fair corrosion resistance. They have the strength to handle medium-pressure applications.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

The grooved ends on these iron fittings connect to pipe with a clamp to easily install piping systems.

The male threads on these brass fittings have a sealant applied for extra protection against leaks. Also known as Pressure Class 125 fittings, they are built for use in low-pressure applications.

These brass fittings have the strength to handle high-pressure applications.

Use these heavy-duty brass fittings for high-pressure drinking water applications.

Extreme pressures are no problem for these heavy-duty brass fittings.

Also known as Pressure Class 125 flanges, these are for use in low-pressure applications. Flanges are aluminum, which is lightweight with good corrosion resistance.

Also known as Pressure Class 3000 fittings, these have the highest pressure rating of all the aluminum pipe fittings we offer.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Use these unthreaded flanges in low-pressure applications. Also known as Pressure Class 125 flanges.

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

Connect to CPVC pipe for use in high-temperature plumbing and water supply applications up to 200° F.

Made of polypropylene, these fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light and are suitable to use outdoors. They have the chemical resistance to withstand acids, solvents, and other harsh substances.

These PVDF fittings meet UL 94 V-0 for flame retardance, so they delay the spread of flames to valuable equipment. PVDF is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances.

Use these plastic fittings to connect gasoline fuel lines to machines and equipment. They have excellent corrosion resistance as well as high strength and impact resistance.

Unlike other manifolds, which have an inlet on either end, these have one inlet on the opposite side from the outlets. This design allows air or fluid to follow a straight path, improving flow through your system. Also known as headers.

When you’re short on vertical space, these manifolds are a good fit—they have outlets on the side instead of on top, so they have a lower profile than rectangular manifolds. Use them to distribute air or fluid to five locations from a single supply source.

Use these manifolds with molding equipment to circulate hot and cold water through your line. They have a red side for hot water and a blue side for cold water.

The rocker lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment.