How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
How to Measure Threaded Pipe Size
More
How to Install Helical Inserts
More
About Helical Insert Length
More
How to Install Key-Locking Inserts
More
Extreme-Pressure Stainless Steel Threaded Pipe Fittings
With the strength to handle extreme pressures, these fittings can be used to connect equipment in hydraulic fluid lines. 316 stainless steel fittings have excellent corrosion resistance. UN/UNF (SAE Straight) threads are also known as O-ring boss threads; the male threads have a gasket to prevent leaks.
For technical drawings and 3-D models, click on a part number.
(SAE Straight) Male
Threads with Gasket
- Specifications Met: See table
- For Use With: See table
Thread Size | Dash Size | 316 Stainless Steel | |||||||
|---|---|---|---|---|---|---|---|---|---|
(A) | (B) | (A) | (B) | Max. Pressure | Max. Steam Pressure | For Use With | Specifications Met | Each | |
UN/UNF (SAE Straight) Female × UN/UNF (SAE Straight) Male | |||||||||
| 7/16"-20 | 9/16"-18 | 04 | 06 | 5,400 psi @ 72° F | 5,400 psi @ 200° F | Hydraulic Fluid, Oil, Steam, Water | SAE J514 | 000000000 | 000000 |
| 9/16"-18 | 7/16"-20 | 06 | 04 | 5,400 psi @ 72° F | 5,400 psi @ 200° F | Hydraulic Fluid, Oil, Steam, Water | SAE J514 | 000000000 | 00000 |
| 9/16"-18 | 3/4"-16 | 06 | 08 | 5,400 psi @ 72° F | 5,400 psi @ 200° F | Hydraulic Fluid, Oil, Steam, Water | SAE J514 | 000000000 | 00000 |
| 9/16"-18 | 7/8"-14 | 06 | 10 | 5,400 psi @ 72° F | 5,400 psi @ 200° F | Hydraulic Fluid, Oil, Steam, Water | SAE J514 | 000000000 | 00000 |
| 9/16"-18 | 1 1/16"-12 | 06 | 12 | 5,400 psi @ 72° F | 5,400 psi @ 200° F | Hydraulic Fluid, Oil, Steam, Water | SAE J514 | 000000000 | 00000 |
| 3/4"-16 | 9/16"-18 | 08 | 06 | 4,800 psi @ 72° F | 4,800 psi @ 200° F | Hydraulic Fluid, Oil, Steam, Water | SAE J514 | 000000000 | 00000 |
Compact Extreme-Pressure Steel Threaded Pipe Fittings
These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces. They are galvanized and zinc-plated steel, which have better corrosion resistance than plain steel fittings. UN/UNF (SAE Straight) threads are also known as O-ring boss threads; the male threads have either a gasket or a gasket and washer to prevent leaks.
For technical drawings and 3-D models, click on a part number.
(SAE Straight) Male
Threads with Gasket
- For Use With: See table
- Specifications Met: See table
Thread Size | Dash Size | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| (A) | (B) | (A) | (B) | Lg. | Max. Pressure | Material | For Use With | Specifications Met | Each | |
UN/UNF (SAE Straight) Female × UN/UNF (SAE Straight) Male | ||||||||||
| 7/16"-20 | 9/16"-18 | 04 | 06 | 1 1/32" | 6,000 psi @ 72° F | Zinc Plated Steel | Air, Hydraulic Fluid, Water | ASTM A108 | 000000000 | 00000 |
| 9/16"-18 | 3/4"-16 | 06 | 08 | 1 1/8" | 6,000 psi @ 72° F | Zinc Plated Steel | Air, Hydraulic Fluid, Water | ASTM A108 | 000000000 | 0000 |
| 3/4"-16 | 9/16"-18 | 08 | 06 | 1 3/8" | 6,000 psi @ 72° F | Zinc Plated Steel | Air, Hydraulic Fluid, Water | ASTM A108 | 000000000 | 0000 |
Right-Angle Flow Rectangular Manifolds
Distribute air or fluid to multiple locations from a single supply source with these manifolds. They are also known as headers. They have mounting holes, so you can mount from the top or side.
Aluminum manifolds are the industry standard for the most common types of applications. They are lighter in weight than other metal manifolds and have good corrosion resistance. Use a plug (sold separately) to close off any unused inlets and outlets.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Water, Hydraulic Fluid
- Temperature Range: -10° to 200° F
- Maximum Pressure:
Air: 1,000 psi @ 72° F
Water: 1,000 psi @ 72° F
Hydraulic Fluid: 3,000 psi @ 72° F
Inlet | Outlet | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| No. of Outlets | Thread Size | Dash Size | Thread Size | Dash Size | Lg. | Wd. | Ht. | Outlet Ctr.-to-Ctr. | Each | |
Outlets on One Side—Standard Outlet Spacing | ||||||||||
| 2 | 3/4"-16 | 08 | 9/16"-18 | 06 | 5" | 1 3/4" | 1 3/4" | 2" | 0000000 | 000000 |
| 3 | 9/16"-18 | 06 | 7/16"-20 | 04 | 5 5/8" | 1 3/4" | 1 3/4" | 1 3/4" | 0000000 | 00000 |
| 3 | 3/4"-16 | 08 | 9/16"-18 | 06 | 7" | 1 3/4" | 1 3/4" | 2" | 0000000 | 00000 |
| 4 | 9/16"-18 | 06 | 7/16"-20 | 04 | 7 3/8" | 1 3/4" | 1 3/4" | 1 3/4" | 0000000 | 00000 |
| 4 | 3/4"-16 | 08 | 9/16"-18 | 06 | 9" | 1 3/4" | 1 3/4" | 2" | 0000000 | 00000 |
| 6 | 3/4"-16 | 08 | 9/16"-18 | 06 | 13" | 1 3/4" | 1 3/4" | 2" | 0000000 | 000000 |
| 10 | 3/4"-16 | 08 | 9/16"-18 | 06 | 21" | 1 3/4" | 1 3/4" | 2" | 0000000 | 000000 |
Straight-Flow Rectangular Manifolds
Unlike other manifolds, which have an inlet on either end, these have one inlet on the opposite side from the outlets. This design allows fluid or air to follow a straight path, improving flow through your system. It also frees up the ends of the manifold, so you can mount it in corners and in narrow spaces. Manifolds are also known as headers. They have mounting holes, so you can mount from the top or side.
Anodized aluminum manifolds are the industry standard for the most common types of applications. They are lighter in weight than other metal manifolds and have good corrosion resistance. These manifolds are anodized for a black finish.
Use a plug (sold separately) to close off any unused inlets and outlets.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Water, Hydraulic Fluid
- Temperature Range: -10° to 200° F
- Maximum Pressure:
Air: 1,000 psi @ 72° F
Water: 1,000 psi @ 72° F
Hydraulic Fluid: 3,000 psi @ 72° F
Inlet | Outlet | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Outlets | Thread Size | Dash Size | Thread Size | Dash Size | Lg. | Wd. | Ht. | Outlet Ctr.-to-Ctr. | Color | Each | |
Standard Outlet Spacing | |||||||||||
| 2 | 9/16"-18 | 6 | 7/16"-20 | 4 | 2 1/8" | 1 1/4" | 1 1/4" | 7/8" | Black | 00000000 | 000000 |
| 4 | 9/16"-18 | 6 | 7/16"-20 | 4 | 3 7/8" | 1 1/4" | 1 1/4" | 7/8" | Black | 00000000 | 00000 |
| 4 | 3/4"-16 | 8 | 9/16"-18 | 6 | 4 3/4" | 1 1/2" | 1 1/2" | 1" | Black | 00000000 | 00000 |
| 6 | 9/16"-18 | 6 | 7/16"-20 | 4 | 5 5/8" | 1 1/4" | 1 1/4" | 7/8" | Black | 00000000 | 00000 |
| 8 | 9/16"-18 | 6 | 7/16"-20 | 4 | 7 3/8" | 1 1/4" | 1 1/4" | 7/8" | Black | 00000000 | 00000 |
Low-Profile Hex Manifolds
When you’re short on vertical space, these manifolds are a good fit—they have outlets on the side instead of on top, so they have a lower profile than rectangular manifolds. Use them to distribute air, water, or hydraulic fluid to five locations from a single supply source. Manifolds have mounting holes, so you can mount from the top.
Anodized aluminum manifolds are the industry standard for the most common types of applications. They are lighter in weight than other metal manifolds and have good corrosion resistance. These manifolds are anodized for a black finish.
316 stainless steel manifolds have excellent corrosion resistance and can handle fuel, gasoline, coolant and other harsh substances.
Use a plug (sold separately) to close off any unused inlets and outlets.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Water, Hydraulic Fluid
- Temperature Range: -10° to 200° F
- Maximum Pressure: 1,000 psi @ 72° F
- Maximum Vacuum: 27 in. of Hg @ 72° F
- For Use With: Air, Water, Hydraulic Fluid, Alcohol, Coolant, Cutting Oil, Deionized Water, Diesel Fuel, Fuel Oil, Gasoline, Mineral Oil, Nitrogen
- Temperature Range: -100° to 500° F
- Maximum Pressure: 3,500 psi @ 72° F
- Maximum Vacuum: 27 in. of Hg @ 72° F
Low-Profile Square Manifolds
With outlets on the side instead of on top, these manifolds have a lower profile than rectangular manifolds and fit well in cramped spaces. Use them to distribute air, water, or hydraulic fluid to three locations from a single supply source. Manifolds have mounting holes, so you can mount from the top.
Anodized aluminum manifolds are the industry standard for the most common types of applications. They are lighter in weight than other metal manifolds and have good corrosion resistance. These manifolds are anodized for a black finish.
Use a plug (sold separately) to close off any unused inlets and outlets.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Water, Hydraulic Fluid
- Temperature Range: -10° to 200° F
- Maximum Pressure: 1,000 psi @ 72° F
- Maximum Vacuum: 27 in. of Hg @ 72° F
Precision AN 37° Flared Fittings for Stainless Steel Tubing
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -320° to 1200° F
- Tubing: Use with seamless 304 or 316 stainless steel
- Specifications Met: See Table
The threads on the tube end of these fittings are Class 3A or 3B and adhere to tighter tolerances than other 37° flared fittings. They are made to exact AS (formerly AN) specifications and provide a tight metal-to-metal seal on tubing that is flared to 37°. Fittings require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| For Tube OD (A) | For Tube OD (B) | Max. Pressure | Specifications Met | Each | |
304 Stainless Steel | |||||
|---|---|---|---|---|---|
| 3/8" | 1/4" | 3,000 psi @ 72° F | AN919-6J, ASTM A380, SAE AS4841 | 0000000 | 000000 |
| 1/2" | 3/8" | 3,000 psi @ 72° F | AN919-12J, ASTM A380, SAE AS4841 | 0000000 | 00000 |
316 Stainless Steel | |||||
| 3/8" | 1/4" | 3,000 psi @ 72° F | AN919-6K, ASTM A380, SAE AS4841 | 00000000 | 00000 |
| 1/2" | 3/8" | 3,000 psi @ 72° F | AN919-12K, ASTM A380, SAE AS4841 | 00000000 | 00000 |
Fittings with female tube end have an internal flare that mates with the male tube end of another fitting.
| For Tube OD (A) | For Tube OD (B) | Max. Pressure | Specifications Met | Each | |
304 Stainless Steel | |||||
|---|---|---|---|---|---|
| 1/2" | 3/8" | 3,000 psi @ 72° F | ASTM A380, NAS1564J8-6, SAE AS4841, SAE AS9100D, SAE AS9104/1 | 00000000 | 000000 |
316 Stainless Steel | |||||
| 1/2" | 3/8" | 3,000 psi @ 72° F | ASTM A380, NAS1564J16-12, SAE AS4841, SAE AS9100D, SAE AS9104/1 | 00000000 | 00000 |
| For Tube OD | Max. Pressure | Specifications Met | Each | |
304 Stainless Steel | ||||
|---|---|---|---|---|
| 1/4" | 3,000 psi @ 72° F | AN818-4J, ASTM A380, SAE AS4841 | 0000000 | 00000 |
| 3/8" | 3,000 psi @ 72° F | AN818-6J, ASTM A380, SAE AS4841 | 0000000 | 0000 |
| 1/2" | 3,000 psi @ 72° F | AN818-8J, ASTM A380, SAE AS4841 | 0000000 | 00000 |
316 Stainless Steel | ||||
| 1/4" | 3,000 psi @ 72° F | AN818-4K, ASTM A380, SAE AS4841 | 00000000 | 00000 |
| 3/8" | 3,000 psi @ 72° F | AN818-6K, ASTM A380, SAE AS4841 | 00000000 | 00000 |
| 1/2" | 3,000 psi @ 72° F | AN818-8K, ASTM A380, SAE AS4841 | 00000000 | 00000 |
| For Tube OD | Max. Pressure | Specifications Met | Each | |
304 Stainless Steel | ||||
|---|---|---|---|---|
| 3/8" | 3,000 psi @ 72° F | AN819-6J, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 0000000 | 00000 |
| 1/2" | 3,000 psi @ 72° F | AN819-8J, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 0000000 | 0000 |
316 Stainless Steel | ||||
| 1/4" | 3,000 psi @ 72° F | AN819-4K, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 0000 |
| 3/8" | 3,000 psi @ 72° F | AN819-6K, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 00000 |
| 1/2" | 3,000 psi @ 72° F | AN819-8K, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 00000 |
Vibration-Resistant Precision AN 37° Flared Fittings for Stainless Steel Tubing
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -320° to 500° F
- Tubing: Use with seamless 304 or 316 stainless steel
- Specifications Met: See Table
A PTFE seal on the tube end of these fittings allows for an extra-strong connection in high-vibration applications. The threads on the tube end are Class 3A and adhere to tighter tolerances than other 37° flared fittings. They are made to exact AS (formerly AN) specifications and provide a tight metal-to-metal seal on tubing that is flared to 37°. Fittings are 316 stainless steel for excellent corrosion resistance. They require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
For technical drawings and 3-D models, click on a part number.
| For Tube OD | Nut Material | Max. Pressure | Specifications Met | Each | |
| 1/4" | 316 Stainless Steel | 3,000 psi @ 72° F | AN818-4K, ASTM A380, SAE AS4841 | 00000000 | 000000 |
| 3/8" | 316 Stainless Steel | 3,000 psi @ 72° F | AN818-6K, ASTM A380, SAE AS4841 | 00000000 | 00000 |
| 1/2" | 316 Stainless Steel | 3,000 psi @ 72° F | AN818-8K, ASTM A380, SAE AS4841 | 00000000 | 00000 |
| For Tube OD | Sleeve Material | Max. Pressure | Specifications Met | Each | |
| 1/4" | 316 Stainless Steel | 3,000 psi @ 72° F | AN819-4K, ASTM A380, MS20819, SAE AS4841 | 00000000 | 00000 |
| 3/8" | 316 Stainless Steel | 3,000 psi @ 72° F | AN819-6K, ASTM A380, MS20819, SAE AS4841 | 00000000 | 00000 |
| 1/2" | 316 Stainless Steel | 3,000 psi @ 72° F | AN819-8K, ASTM A380, MS20819, SAE AS4841 | 00000000 | 00000 |
37° Flared Fittings for Stainless Steel Tubing
- Tubing: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Specifications Met: ISO 8434, SAE J514, except fittings with BSPP and BSPT threads meet SAE J514 only
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They withstand high pressure, so they’re often used in hydraulic applications. Made from 316 stainless steel, they resist corrosion from water and chemicals. A complete fitting requires a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: See table
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1200°
Fittings with female tube end have an internal flare that mates with the male tube end of another fitting.
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°. Sleeves are 316 stainless steel for excellent corrosion resistance. They are also known as ferrules.
Inch × metric sleeve adapters convert the fitting from inch to metric.
37° Flared Fittings for Steel Tubing
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Tubing: Use with seamless steel
- Specifications Met: SAE J514
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately. Fittings are zinc-plated steel for fair corrosion resistance.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: -60° to 400° F
Fittings with female tube end have an internal flare that mates with the male tube end of another fitting.
| For Tube OD (A) | For Tube OD (B) | Material | Max. Pressure | Each | |
| 1/2" | 3/8" | Zinc-Plated Steel | 1,250 psi @ 72° F | 000000000 | 00000 |
- Temperature Range: -60° to 400° F
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on steel tubing that is flared to 37°. Sleeves are zinc-plated steel for fair corrosion resistance. They are also known as ferrules.
Black-Phosphate Steel Easy-to-Install Thread-Locking Inserts
A black-phosphate finish provides mild corrosion resistance. Also known as E-Z Lok, these inserts use Loctite® adhesive to keep them in place. The adhesive reaches full strength after 72 hours. Installation requires a drill bit and a standard tap. Then set the insert with a bolt and two nuts, or use an installation bit.
Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.
To drive slotted inserts, you can use a slotted screwdriver instead of using an installation bit or a bolt and two nuts.
For technical drawings and 3-D models, click on a part number.
Stainless Steel Helical Inserts
Also known as Heli-Coil inserts, these inserts have coils that expand once installed to securely anchor the insert. All have a prong for ease of installation. An installation tool grips the prong and reduces the coil diameter, enabling the insert to fit in tapped holes. Remove the prong to insert the screw. Installation requires a drill bit, a helical insert tap, an installation tool, and a prong break-off tool.
For technical drawings and 3-D models, click on a part number.
Inserts | Through-Hole Taps | Closed-End Hole Taps | Installation Tools | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Installed Lg. | Drill Bit Size | For Max. Hole Dia. | Specifications Met | Pkg. Qty. | Pkg. | Each | Each | Each | ||||
18-8 Stainless Steel—Right-Hand Threaded | |||||||||||||
| 9/16"-18 | 0.562" | 37/64" | 37/64" | MS124-661 | 5 | 000000000 | 000000 | 000000000 | 000000 | 000000000 | 0000000 | 000000000 | 0000000 |
| 9/16"-18 | 0.844" | 37/64" | 37/64" | MS124-701 | 5 | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 000000 | 000000000 | 000000 |
Stainless Steel Screw-Locking Helical Inserts
A distorted thread grips the screw to resist loosening. Also known as Heli-Coil inserts, these inserts have coils that expand once installed to securely anchor the insert. All have a prong for ease of installation. An installation tool grips the prong and reduces the coil diameter, enabling the insert to fit in tapped holes. Remove the prong to insert the screw. Installation requires a drill bit, a helical insert tap, an installation tool, and a prong break-off tool.
For technical drawings and 3-D models, click on a part number.
Inserts | Through-Hole Taps | Closed-End Hole Taps | Installation Tools | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Installed Lg. | Drill Bit Size | For Max. Hole Dia. | Specifications Met | Pkg. Qty. | Pkg. | Each | Each | Each | ||||
18-8 Stainless Steel | |||||||||||||
| 9/16"-18 | 0.562" | 37/64" | 37/64" | MS21209F9-10, NASM21209 | 1 | 000000000 | 00000 | 000000000 | 000000 | 000000000 | 0000000 | 000000000 | 0000000 |
| 9/16"-18 | 0.844" | 37/64" | 37/64" | MS21209F9-15, NASM21209 | 1 | 000000000 | 0000 | 000000000 | 00000 | 000000000 | 000000 | 000000000 | 000000 |
Helical Inserts with Installation Tools
Inserts come with a through-hole tap and installation tool. Also known as Heli-Coil inserts, they have coils that expand once installed to securely anchor the insert. All have a prong for ease of installation. An installation tool grips the prong and reduces the coil diameter, enabling the insert to fit in tapped holes. Remove the prong to insert the screw.
| Thread Size | Installed Lg. | Drill Bit Size | For Max. Hole Dia. | No. of Inserts Included | Includes | Each | |
18-8 Stainless Steel—Right-Hand Threaded | |||||||
|---|---|---|---|---|---|---|---|
| 9/16"-18 | 0.844" | 37/64" | 37/64" | 6 | Drill Bit, Through-Hole Tap, Installation Tool | 000000000 | 0000000 |
18-8 Stainless Steel Key-Locking Inserts
Made of stainless steel, these inserts have good corrosion resistance. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. Use them to repair or change threads in soft metals such as aluminum. Inserts may be mildly magnetic. They’re comparable to Keensert® inserts. Installation requires a drill bit, a standard tap, an installation tool, and a hammer.
Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.
For technical drawings and 3-D models, click on a part number.
Mil. Spec. Stainless Steel Key-Locking Inserts
These inserts are made to stringent military specifications. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. Use them to repair or change threads in soft metals such as aluminum. Inserts may be mildly magnetic. They’re comparable to Keensert® inserts. Installation requires a drill bit, a standard tap, an installation tool, and a hammer.
Inserts with a thin wall are often used in small holes or near the edge of a workpiece.
Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.
For technical drawings and 3-D models, click on a part number.
Inserts | Installation Tools | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | For Tap Thread Size | Installed Lg. | Drill Bit Size | For Max. Hole Dia. | No. of Locking Keys | Specifications Met | Each | Each | ||
18-8 Stainless Steel with Thick Wall | ||||||||||
| 9/16"-18 | 13/16"-16 | 13/16" | 49/64" | 0.771" | 4 | MS51831-207, NAS1395C9 | 000000000 | 000000 | 000000000 | 000000 |
18-8 Stainless Steel with Extra Thick Wall | ||||||||||
| 9/16"-18 | 7/8"-14 | 13/16" | 53/64" | 0.833" | 4 | MS51832-207 | 000000000 | 00000 | 000000000 | 00000 |
Mil. Spec. Alloy Steel Key-Locking Inserts
The strongest key-locking inserts we offer, these inserts are made to stringent military specifications. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. Use them to repair or change threads in soft metals such as aluminum. Inserts may be mildly magnetic. They’re comparable to Keensert® inserts. Installation requires a drill bit, a standard tap, an installation tool, and a hammer.
Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.
For technical drawings and 3-D models, click on a part number.
Black-Phosphate Steel Key-Locking Inserts
A black-phosphate finish provides mild corrosion resistance. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. Use them to repair or change threads in soft metals such as aluminum. They’re comparable to Keensert® inserts. Installation requires a drill bit, a standard tap, an installation tool, and a hammer.
Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole with stripped threads.
For technical drawings and 3-D models, click on a part number.
Key-Locking Insert Assortments with Installation Tool
These assortments include various sizes of key-locking inserts with thick and thin walls, and an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. Use them to repair or convert threads in soft metals such as aluminum. They’re comparable to Keensert® inserts.
18-8 stainless steel inserts are more corrosion resistant than black-phosphate steel. They may be mildly magnetic.
Black-phosphate steel inserts are mildly corrosion resistant.
Choose assortments with thick-wall inserts for greater strength than thin-wall inserts, or to fill a large hole.
For technical drawings and 3-D models, click on a part number.
For Tap | ||||||
|---|---|---|---|---|---|---|
| Includes | No. of Inserts Included | Thread Size | Drill Bit Size | For Max. Hole Dia. | Each | |
Inch | ||||||
18-8 Stainless Steel with Thick Wall | ||||||
| 1/4"-28 Thread × 3/8" Installed Lg. (20 Each) 5/16"-24 Thread × 0.438" Installed Lg. (15 Each) 3/8"-24 Thread × 1/2" Installed Lg. (10 Each) 7/16"-20 Thread × 5/8" Installed Lg. (10 Each) 1/2"-20 Thread × 5/8" Installed Lg. (6 Each) 9/16"-18 Thread × 0.813" Installed Lg. (5 Each) 5/8"-18 Thread × 7/8" Installed Lg. (3 Each) 3/4"-16 Thread × 1 1/8" Installed Lg. (3 Each) 7/8"-14 Thread × 1 1/4" Installed Lg. (3 Each) 1"-12 Thread × 1 3/8" Installed Lg. (2 Each) Installation Tool | 77 | 7/16"-14 1/2"-13 9/16"-12 5/8"-11 3/4"-16 7/8"-14 1 1/8"-12 1 1/4"-12 1 3/8"-12 | X 29/64" 33/64" 37/64" 45/64" 53/64" 1 1/16" 1 3/16" 1 5/16" | 0.397" 29/64" 33/64" 37/64" 45/64" 53/64" 1 1/16" 1 3/16" 1 5/16" | 000000000 | 0000000 |
Black-Phosphate Steel with Thick Wall | ||||||
| 1/4"-28 Thread × 3/8" Installed Lg. (20 Each) 5/16"-24 Thread × 0.438" Installed Lg. (15 Each) 3/8"-24 Thread × 1/2" Installed Lg. (10 Each) 7/16"-20 Thread × 5/8" Installed Lg. (10 Each) 1/2"-20 Thread × 5/8" Installed Lg. (6 Each) 9/16"-18 Thread × 0.813" Installed Lg. (5 Each) 5/8"-18 Thread × 7/8" Installed Lg. (3 Each) 3/4"-16 Thread × 1 1/8" Installed Lg. (3 Each) 7/8"-14 Thread × 1 1/4" Installed Lg. (3 Each) 1"-12 Thread × 1 3/8" Installed Lg. (2 Each) Installation Tool | 77 | 7/16"-14 1/2"-13 9/16"-12 5/8"-11 3/4"-16 7/8"-14 1 1/8"-12 1 1/4"-12 1 3/8"-12 | X 29/64" 33/64" 37/64" 45/64" 53/64" 1 1/16" 1 3/16" 1 5/16" | 0.397" 29/64" 33/64" 37/64" 45/64" 53/64" 1 1/16" 1 3/16" 1 5/16" | 000000000 | 000000 |
Key-Locking Inserts with Installation Tool
Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. These inserts are used to repair or convert threads in soft metals such as aluminum. They’re comparable to Keensert® inserts.
18-8 stainless steel inserts are more corrosion resistant than black-phosphate steel. They may be mildly magnetic.
Black-phosphate steel inserts are mildly corrosion resistant.
Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.
For technical drawings and 3-D models, click on a part number.