With outlets on the side instead of on top, these manifolds have a lower profile than rectangular manifolds and fit well in cramped spaces. Use them to distribute air, water, or hydraulic fluid to three locations from a single supply source. Manifolds have mounting holes, so you can mount from the top.

Anodized aluminum manifolds are the industry standard for the most common types of applications. They are lighter in weight than other metal manifolds and have good corrosion resistance. These manifolds are anodized for a black finish.

316 stainless steel manifolds have excellent corrosion resistance and can handle fuel, gasoline, coolant and other harsh substances.

For technical drawings and 3-D models, click on a part number.

Made of 18-8 stainless steel, these inserts have good corrosion resistance. Also known as E-Z Lok, they use Loctite® adhesive to keep them in place. The adhesive reaches full strength after 72 hours. They may be mildly magnetic. Installation requires a drill bit and a standard tap. Then set the insert with an installation bit, a slotted screwdriver, or a bolt with two nuts.

Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.

For technical drawings and 3-D models, click on a part number.

A black-phosphate finish provides mild corrosion resistance. Also known as E-Z Lok, these inserts use Loctite® adhesive to keep them in place. The adhesive reaches full strength after 72 hours. Installation requires a drill bit and a standard tap. Then set the insert with a bolt and two nuts, or use an installation bit.

Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.

To drive slotted inserts, you can use a slotted screwdriver instead of using an installation bit or a bolt and two nuts.

For technical drawings and 3-D models, click on a part number.

A black-phosphate finish provides mild corrosion resistance. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. Use them to repair or change threads in soft metals such as aluminum. They’re comparable to Keensert® inserts. Installation requires a drill bit, a standard tap, an installation tool, and a hammer.

Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole with stripped threads.

For technical drawings and 3-D models, click on a part number.

Made of stainless steel, these inserts have good corrosion resistance. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. Use them to repair or change threads in soft metals such as aluminum. Inserts may be mildly magnetic. They’re comparable to Keensert® inserts. Installation requires a drill bit, a standard tap, an installation tool, and a hammer.

Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.

For technical drawings and 3-D models, click on a part number.

With a distorted internal thread and keys on the outside, these inserts create a strong hold on both fasteners and surrounding material. Together, the distorted thread and keys create a mechanical lock that resists pull-out from vibration or temperature changes and is stronger than inserts that require threadlocker. Use them to create completely new threads, add strong threads in soft metal, or replace existing threads that are damaged or need to be resized. They're often seen in molds, tools and dies, and suspension systems in vehicles.

Made of a solid piece of metal, these inserts are also stronger than helical inserts, which are made of coiled wire. A dry-film lubricant makes it easy to install them and to screw fasteners into them. All are made to tight tolerances with strictly controlled materials; many inch sizes also meet military or aerospace standards for dimensions and material.

To install, you'll need a tap to create the threads in your material, and an installation tool and a hammer to drive the keys into the material.

When choosing between stainless steel and cadmium-plated steel, consider strength and price. Both materials withstand wet environments. Stainless steel inserts are economical, but not as strong as steel. Use cadmium-plated steel inserts in applications where additional strength is necessary, such as in engine blocks. Steel inserts are stronger than stainless steel inserts, but are more expensive.

Inserts with thick walls are the most commonly used; they’re stronger than thin-wall inserts and are used in larger holes.

For technical drawings and 3-D models, click on a part number.

Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. These inserts are used to repair or convert threads in soft metals such as aluminum. They’re comparable to Keensert® inserts.

18-8 stainless steel inserts are more corrosion resistant than black-phosphate steel. They may be mildly magnetic.

Black-phosphate steel inserts are mildly corrosion resistant.

Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.

Also known as Heli-Coil inserts, these inserts have coils that expand once installed to securely anchor the insert. All have a prong for ease of installation. An installation tool grips the prong and reduces the coil diameter, enabling the insert to fit in tapped holes. Remove the prong to insert the screw. Installation requires a drill bit, a helical insert tap, an installation tool, and a prong break-off tool.

Inserts that meet DIN 8140 adhere to international standards for dimensions.

For technical drawings and 3-D models, click on a part number.

A distorted thread grips the screw to resist loosening. Also known as Heli-Coil inserts, these inserts have coils that expand once installed to securely anchor the insert. All have a prong for ease of installation. An installation tool grips the prong and reduces the coil diameter, enabling the insert to fit in tapped holes. Remove the prong to insert the screw. Installation requires a drill bit, a helical insert tap, an installation tool, and a prong break-off tool.

Inserts that meet DIN 8140 adhere to international standards for dimensions.

For technical drawings and 3-D models, click on a part number.

Inserts come with a through-hole tap and installation tool. Also known as Heli-Coil inserts, they have coils that expand once installed to securely anchor the insert. All have a prong for ease of installation. An installation tool grips the prong and reduces the coil diameter, enabling the insert to fit in tapped holes. Remove the prong to insert the screw.

These kits have short-, normal-, and long-reach inserts, an installation tool, and a tap.