These switches actuate when a magnet comes within sensing distance, and reset when the magnet moves away.

Use a free, downloadable app with these switches to automate alarms in your facility, such as sounding a buzzer if a trailer door is opened after a certain time.

Prevent unauthorized use of doors or windows with a combination of coded magnets and contacts that wire to an alarm system.

Rods along the barrel of these cylinders secure the end caps and shield the barrel from impact.

Made with an NFPA industry standard footprint and a stainless steel body, these cylinders are easily interchanged with the most common mounting footprint and withstand chemicals, corrosive solutions, and washdowns.

An extruded-aluminum body means these cylinders have no open spaces for debris to collect.

These cylinders have self-adjusting cushions that automatically compensate for changes in load and speed.

Push and pull light duty loads. These air cylinders use compressed air to both extend and retract, so they operate at nearly full force in either direction.

Simplify your setup by running fluid or air through the hollow piston in these air cylinders. The rod extends from both ends, so they can push an object and pull another at the same time, unlike standard air cylinders.

Minimize the release of particles that can damage electronics or contaminate batches as you push and pull light loads. These air cylinders are designed with seals and caps that prevent particles from escaping.

Move loads between three positions instead of two.

Push and pull light duty loads in areas constantly exposed to dust and powders as fine as flour.

Convenient for use with devices such as grippers and printing heads, these air slides have a nonrotating head that provides steady motion and a larger mounting area than air cylinders.

Prevent sudden drops while raising and lowering grippers and other pick-and-place equipment.

Modify the stroke length on these air slides to meet changing application requirements—slides have adjustable shaft collars on the guide rods that you can move to fine-tune the stroke length.

Move heavy loads back and forth—these air slides have over twice the capacity as standard rodless ones. They are often used for high-volume diverting and sorting.

With no external moving parts, these air slides provide a long stroke, but have a static footprint—only the carriage on top moves.

Threaded through-holes in each corner allow you to mount these cylinders directly to equipment or mount with attachments.

For multiple mounting options, these air cylinders match an industry standard ISO footprint and have threaded holes on the face and sides.

Mount these cylinders directly to equipment in environments where contamination is a concern, such as electronics manufacturing.

With a small body size, these cylinders fit into tight spaces but offer similar push forces to standard hydraulic cylinders.

Made of 303 stainless steel, these hydraulic cylinders move heavy loads without corroding in wet areas.