Freeze and store large amounts of food and other perishables. The cabinet and lid on these freezers are lined with energy-efficient foam insulation to prevent cold from escaping. Corrosion-resistant aluminum lines the interior, so freezers won’t rust from water and ice. All have one or two wire baskets for placing your most frequently used products above other items.

Built for long-lasting safety and service, these refrigerators provide cold storage of flammable liquids in your laboratory or plant.

Attach one of these chillers to your nonrefrigerated drinking fountains to provide cold water. You can also install a bottle filler or drinking fountain nozzle directly to the unit. Made of galvanized steel for corrosion resistance, chillers are factory set at 50° F but can be adjusted. They meet NSF/ANSI safety standards for use with drinking water.

1.5-19 gph chillers need 6” clearance in front of the unit and 3” behind the unit for proper ventilation.

30 gph chiller needs 6” clearance in front and in back for proper ventilation.

Fountains are factory set at 50° F but can be adjusted.

Fountains with filter reduce the lead and chlorine content from drinking water. Change the filter cartridge every 1,500 gallons.

Styles C-E help comply with ADA when properly installed.

Style E has a top panel that indicates filter status.

Fountains that cannot be sold to Iowa are restricted by local requirements for drinking water.

This fountain is designed for humid and high-temperature environments. The internal components are coated for corrosion resistance. Fountain is factory set at 50° F but can be adjusted.

Fountains are factory set at 50° F but can be adjusted.

Fountains with filter reduce the lead and chlorine content from drinking water. Change the filter cartridge every 1,500 gallons.

Fountains that cannot be sold to Iowa are restricted by local drinking water requirements.

For more cooling capacity than other liquid chillers, these have a heavy duty pump that can handle higher flow rates and pressures. They provide constant, uniform cooling to water or glycol solutions used in temperature-sensitive equipment, such as spot-welding systems, molds, lasers, and X-ray diffraction equipment. All have an internal tank to ensure liquid flows in a continuous loop. They are used to cool liquid in process equipment. Adjust the set temperature with the keypad.

Chillers rated for 4,300 and 11,300 Btu/hr. have a cooling capacity based on a 65° F liquid temperature and a 95° F room temperature.

Chillers rated for 24,000 to 60,000 Btu/hr. have a cooling capacity based on a 65° F liquid temperature and a 90° F room temperature.

Chillers with a bypass valve recirculate liquid in the chiller if the outlet is obstructed.

These liquid chillers maintain a stable temperature within 0.18° F for the most precise temperature control. They provide constant, uniform cooling to water or glycol solutions used in temperature-sensitive equipment, such as spot-welding systems, molds, lasers, and X-ray diffraction equipment. All have an internal tank to ensure liquid flows in a continuous loop. Use them to cool liquid in process equipment. Adjust the set temperature with the keypad.

Cool welding guns and torches with these recirculating coolers. The outlet connects to a hose running to your welder or torch, and the inlet connects to a hose running back from your welder or torch. Coolers can also be used in plasma applications.