Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air. These regulators connect to other Parker units of the same series with joiner clamps, so you can customize your air preparation system.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air—joiner clamps connect these regulators into your Aventics setup.

An internal check valve permits reverse flow, so these regulators work with double-acting cylinders.

Install these regulators directly on your air-powered tool to maintain the set air pressure.

Mount these regulators to a 35 mm DIN rail with the included brackets. Use them to adjust and maintain the pressure of your compressed air.

Cleaned and double bagged in an ISO Class 3 and Fed. Spec. Class 1 clean room for protection from contamination, these regulators are suitable for use in clean rooms.

Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.

Join two or more of these manifold regulators to power multiple tools or machines from a single air supply—you can set a different output pressure on each one. Connect them to other Parker components in the same series with joiner clamps to customize your air preparation system.

Run up to four air-powered tools from a single air supply.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators provide clean, compressed air at the pressure you need. They connect to other Festo units of these same series with joiner clamps—even if the pipe sizes are slightly different—so you can customize your air preparation system.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

Connect these filter/regulators to other Aventics units of the same series with joiner clamps to customize your air preparation system. A filter and regulator joined top-to-bottom, they provide clean, compressed air at the pressure you need.

Mount these filter/regulators to a 35 mm DIN rail with the included brackets. The filter and regulator are joined top-to-bottom, so they fit in the same space as a filter alone.

No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.

Connect these filter/regulators to your programmable logic controller (PLC) via IO-Link to remotely control the air pressure, monitor performance, and run diagnostics.

Supply multiple locations with clean, compressed air at different pressures. These manifolds distribute air from a single supply through regulators with their own pressure controls, so you can adjust each one separately.

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

With one outlet port before the lubricator and one after, these filter/regulator/lubricators work in systems that require lubrication in some lines but not in others.