Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

An internal check valve permits reverse flow, so these regulators work with double-acting cylinders.

Cleaned and double bagged in an ISO Class 3 and Fed. Spec. Class 1 clean room for protection from contamination, these regulators are suitable for use in clean rooms.

With a greater flow capacity than our standard precision compressed air regulators, use these regulators to adjust and maintain air pressure in sensitive high-flow applications where constant, consistent pressure is important.

A pressure-calibrated dial allows for easy adjustments to outlet pressure in high-flow applications.

Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.

A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.

An oil filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

An SMC filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

No need for thread adapters—these filter/regulator/lubricators have an NPT inlet and a BSPP outlet.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Mount these valves directly to cylinder ports, eliminating additional tubing between the cylinder and valve for better control than inline valves. They control the speed of air-powered equipment by adjusting the volume of airflow.

Designed to be mounted inline, these valves can be placed in an easy-to-reach location along your line to control the speed of air-powered equipment by adjusting the volume of airflow. A numeric indicator provides a relative measure of airflow, similar to the volume dial on a speaker, so it's easy to set the same flow rate with each use.

Mount these valves directly to cylinder ports, eliminating additional tubing between the cylinder and valve for better control than inline valves. Made of plastic and stainless steel parts, they have excellent corrosion resistance. They control the speed of air-powered equipment by adjusting the volume of airflow.

A padlock locks the handle of these valves in the shut-off position so you can disconnect air tools safely.

Slide the knurled sleeve in one direction to stop flow, and slide it back to start flow again.

Install these valves in the exhaust ports of air directional control valves to control exhaust air speed without needing access to your cylinder.

Quickly vent exhaust air to the atmosphere or divert it to another place in your system to speed up the movement of equipment. The 90° elbow shape allows you to install them in tight spaces. Also known as quick exhaust valves.

Release pressure in the line between a compressor and an air storage tank, making start-up easier on the motor. These valves open to allow flow into the tank and close when flow stops or reverses direction, preventing air from escaping the tank when the air compressor is not running.

These valves automatically reduce a high, variable inlet pressure to a lower, stable outlet pressure.

A cast iron body absorbs vibration from pressure changes to reduce wear and noise in your pipeline.

Often used in wet conditions and harsh environments, these valves have a 316 stainless steel body for excellent corrosion resistance.

Often used on dispensers, humidifiers, and fountains, these valves have a 316 stainless steel body that can stand up to deionized water and corrosive conditions.

Rated for more than double the temperature of standard pressure-regulating valves, these can withstand temperatures up to 550° F.

Maintain contaminant-free standards in clean room environments. These valves come cleaned and bagged to Fed. Spec. Class 100 and ISO Class 5 clean room standards and have a 316 stainless steel body with a smooth finish to resist dust collection.

For a longer service life than cast iron valves, these have a durable bronze body.

A 316 stainless steel body provides exceptional corrosion resistance in wet conditions and harsh environments.

These valves meet NSF/ANSI 61 for use in drinking water systems.

Use these valves in pipelines.

Body is brass or nickel-plated brass. All meet ASME Code Section VIII for use with air and inert gas pressure vessels.

For corrosion resistance in wet conditions and harsh environments, these valves have a 303 stainless steel body. All meet ASME Code Section VIII for use with air and inert gas pressure vessels.

With a 316 stainless steel body for exceptional corrosion resistance, these valves are often used in wet conditions and harsh environments. All meet ASME Code Section VIII for use with air and inert gas pressure vessels.

These valves meet ASME Code Section I for use with steam power boilers requiring pressure relief above 15 psi.

These valves meet ASME Code Section VIII for use with water pressure vessels.

Alter the set pressure to suit your application.

Change set pressure without guesswork—the adjustment screw is marked in 25 psi increments for making pressure adjustments without a gauge.

A finely threaded adjustment screw lets you make precise set pressure adjustments.

Cleaned and bagged for oxygen service and other high-purity applications, these valves are built to withstand the extreme cold of liquid carbon dioxide, liquid nitrogen, and liquid oxygen.

These valves are often used with catalysts, pH buffers, and electroplating solutions.

Instead of exhausting discharge directly, these discs have a threaded relief port for attaching a drain line to direct discharge away from your work environment.