Input Voltage Input Voltage |
---|
|
Relay Type Relay Type |
---|
![]() | Standard |
Number of Terminals Number of Terminals |
---|
|
Mounting Location Mounting Location |
---|
|
Switching Voltage Switching Voltage |
---|
|
Switching Current Switching Current |
---|
|
Industry Designation Industry Designation | Show |
---|
|
Industry Designation Industry Designation | Hide |
---|
|
Switch Starting Position Switch Starting Position |
---|
|
Operation Type Operation Type |
---|
|
Number of Circuits Controlled Number ofCircuits Controlled |
---|
|
Switching Current with Heat Sink Switching Currentwith Heat Sink |
---|
|
Wire Connection Type Wire Connection Type |
---|
![]() | Screw Terminals |
Switch Action Switch Action |
---|
|
Height Height |
---|
|
Mounting Hole Diameter Mounting Hole Diameter |
---|
|
Number of Mounting Holes Number of Mounting Holes |
---|
|
Width Width |
---|
|
Depth Depth |
---|
|
Application Application |
---|
|
Specifications Met Specifications Met |
---|
More
With no moving parts, these solid state relays have an extended service life.
Heat sinks can be used to disperse heat to increase the relay’s current rating. Mount to 35 mm DIN rail or flat surfaces. Before mounting one-circuit relays, silicone compound should be applied between the heat sink and relay.
Relays | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Switching Current | Heat Sinks | |||||||||||
Number of Terminals | Input Voltage | Without Heat Sink | With Heat Sink | Switching Voltage | Ht. | Wd. | Dp. | Specifications Met | Each | Each | ||
1 Circuit Controlled with 1 On (Normally Closed)—SPST-NC | ||||||||||||
With High-Starting-Current Protection | ||||||||||||
4 | 70-140V AC | 7.5A | 25A | 300V AC | 2.3" | 1.8" | 1.1" | UL Recognized C-UL Recognized | 0000000 | 000000 | 0000000 | 0000000 |
4 | 3-30V AC/3-30V DC | 7.5A | 25A | 300V AC | 2.3" | 1.8" | 1.1" | UL Recognized C-UL Recognized | 0000000 | 00000 | 0000000 | 000000 |
Silicone Compound for One-Circuit Relays (8 oz.) | 00000000 | Each | 000000 |