12V DC Relays | McMaster-Carr

Clear All

	Input Voltage Input Voltage	Show

12V DC

	Input Voltage Input Voltage	Hide

	Switching Voltage Switching Voltage

	Switching Current Switching Current

	Number of Terminals Number of Terminals

	Industry Designation Industry Designation

	Relay Type Relay Type


Standard	Signal

Timer

	Mounting Location Mounting Location

Relay Socket

DIN Rail

Surface

Printed Circuit Board

	Number of Circuits Controlled Number of Circuits Controlled

	Switch Starting Position Switch Starting Position

1 Off (Normally Open)

1 Off (Normally Open) and 1
On (Normally Closed)

1 Off (Normally Open) or 1 On
(Normally Closed)

2 Off (Normally Open)

2 Off (Normally Open) or 2 On
(Normally Closed)

3 Off (Normally Open) or 3 On
(Normally Closed)

4 Off (Normally Open) or 4 On
(Normally Closed)

	Operation Type Operation Type

Mechanical

Solid State

	Application Application

Power

Signal

	Socket Connection Type Socket Connection Type


Quick- Disconnect Terminals	Circular Pin Terminals

	Switch Action Switch Action

Springs Back (Momentary)

Stays Switched (Maintained)

	Control Current Control Current

	Width Width

	Height Height

	Depth Depth

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Circuit Position Circuit Position

Off (Normally Open)

On (Normally Closed)

	Mechanical Life Cycles Mechanical Life Cycles

	Quick-Disconnect Tab Width Quick-Disconnect Tab Width

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

RoHS Compliant with
Exemptions

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

99 Products

About Relays

About Timer Relays

8-Terminal Relay, 15 Amp

8-Terminal Relay, 10 Amp

11-Terminal Relay

14-Terminal Relay, 8 Amp

14-Terminal Relay, 15 Amp

Smaller than standard spade-terminal relays in height and depth, these relays save space inside your control cabinet. Attach quick-disconnect terminals or plug relays into relay sockets.

Relay sockets (sold separately) mount to 35 mm DIN rail or flat surfaces.

For technical drawings and 3-D models, click on a part number.

Relays
			Switching Current											Relay Sockets
Number of Terminals	Input Voltage	Control Current, mA	@ 120V AC	@28V DC	Max. Switching Voltage	Ht.	Wd.	Dp.	Quick-Disconnect Tab Wd.	Features	Specifications Met		Each		Each
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT
8	12V DC	75	15A	12A	300V AC	1.1"	0.9"	1.6"	0.187"	LED Indicating Light, Lockable Test Button, Mechanical Flag Indicator	UL Recognized Component, C-UL Recognized Component, CSA Certified, CE Marked	00000000	000000	0000000	00000
8	12V DC	92	10A	10A	300V AC	1.1"	0.9"	1.6"	0.11"	LED Indicating Light, Lockable Test Button, Mechanical Flag Indicator	UL Recognized Component, C-UL Recognized Component, CSA Certified, CE Marked	000000000	00000	0000000	0000
3 Circuits Controlled with 3 Off (Normally Open) or 3 On (Normally Closed)—3PDT
11	12V DC	117	15A	12A	300V AC	1.1"	1.2"	1.6"	0.187"	LED Indicating Light, Lockable Test Button, Mechanical Flag Indicator	UL Recognized Component, C-UL Recognized Component, CSA Certified, CE Marked	00000000	00000	0000000	00000
4 Circuits Controlled with 4 Off (Normally Open) or 4 On (Normally Closed)—4PDT
14	12V DC	92	8A	8A	300V AC	1.1"	0.9"	1.6"	0.11"	LED Indicating Light, Lockable Test Button, Mechanical Flag Indicator	UL Recognized Component, C-UL Recognized Component, CSA Certified, CE Marked	000000000	00000	0000000	0000
14	12V DC	125	15A	12A	300V AC	1.1"	1.6"	1.6"	0.187"	LED Indicating Light, Lockable Test Button, Mechanical Flag Indicator	UL Recognized Component, C-UL Recognized Component, CSA Certified, CE Marked	00000000	00000	0000000	00000

Thin Spade-Terminal Relays

5-Terminal Relay

8-Terminal Relay

Thinner than other spade-terminal relays, these fit in tight spaces. Attach quick-disconnect terminals or plug relays into relay sockets. Use them for low-current switching applications such as small motors and pilot lights.

Relay sockets with screw terminals (sold separately) mount to 35 mm DIN rail or flat surfaces.

Relay sockets with spring-clamp terminals (sold separately) mount to 35 mm DIN rail.

For technical drawings and 3-D models, click on a part number.

Relays												Relay Sockets with Screw Terminals		Relay Sockets with Spring-Clamp Terminals
Number of Terminals	Input Voltage	Switching Current @ 120V AC/28V DC	Control Current, mA	hp @ Switching Voltage	Ht.	Wd.	Dp.	Quick-Disconnect Tab Wd.	Specifications Met		Each		Each		Each
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT
5	12V DC	10A	43	1/3 hp @ 120 V AC	1.1"	0.5"	1.4"	0.187"	UL Recognized Component, CSA Certified	0000000	00000	0000000	00000	0000000	00000
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT
8	12V DC	5A	43	1/6 hp @ 120 V AC	1.1"	0.5"	1.4"	0.098"	UL Recognized Component, CSA Certified	0000000	00000	0000000	00000	0000000	00000

Spade-Terminal Relays

5-Terminal Relay

8-Terminal Relay

11-Terminal Relay

Relay Socket

Attach quick-disconnect terminals or plug these relays into relay sockets. Also known as ice cube relays.

Relay sockets (sold separately) mount to 35 mm DIN rail or flat surfaces.

For technical drawings and 3-D models, click on a part number.

Relays												Relay Sockets
Number of Terminals	Input Voltage	Control Current, mA	Switching Current @ 240V AC	hp @ Switching Voltage	Ht.	Wd.	Dp.	Quick-Disconnect Tab Wd.	Specifications Met		Each		Each
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT
5	12V DC	100	10A	1/3 hp @ 120 V AC 1/2 hp @ 240 V AC	1.4"	1.5"	1.9"	0.187"	UL Recognized Component CSA Certified	0000000	000000	0000000	000000
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT
8	12V DC	100	10A	1/3 hp @ 120 V AC 1/2 hp @ 240 V AC	1.4"	1.5"	1.9"	0.187"	UL Recognized Component CSA Certified	0000000	00000	0000000	00000
3 Circuits Controlled with 3 Off (Normally Open) or 3 On (Normally Closed)—3PDT
11	12V DC	100	15A	1/2 hp @ 120 V AC 1/2 hp @ 240 V AC	1.4"	1.5"	1.9"	0.187"	UL Recognized Component CSA Certified	0000000	00000	0000000	00000

Long-Life Spade-Terminal Relays

With no moving parts, these solid state relays have an extended service life. Use them for high-speed switching at low current levels.

Heat sink can be used to disperse heat to increase the relay’s current rating. Mount to 35 mm DIN rail or flat surfaces.

Relays
		Switching Current @ 120V AC/240V AC					Quick-Disconnect Tab Wd.					Heat Sinks
Number of Terminals	Input Voltage	Without Heat Sink	With Heat Sink	Ht.	Wd.	Dp.	Control Terminal	Load Terminal	Specifications Met		Each		Each
1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO
4	12V DC	5A	__	1.9"	1.5"	0.9"	0.11"	0.25"	UL Recognized Component C-UL Recognized Component CSA Certified CE Marked	00000000	000000	000000	00
4	12V DC	5A	10A	1.9"	1.5"	0.9"	0.11"	0.25"	UL Recognized Component C-UL Recognized Component CSA Certified CE Marked	00000000	00000	0000000	000000

Circular-Pin Relays

8-Terminal Relay

11-Terminal Relay

Relay Socket for
8-Terminal
Relay

Relay Socket for 11-Terminal Socket

The circular pin terminals plug into relay sockets for easy installation. Also known as ice cube relays.

Relay sockets (sold separately) mount to 35 mm DIN rail or flat surfaces.

Relays										Relay Sockets
Number of Terminals	Input Voltage	Control Current, mA	Switching Current @ 240V AC	Ht.	Wd.	Dp.	Specifications Met		Each		Each
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT
8	12V DC	112	10A	1.4"	1.4"	2.1"	UL Recognized Component, CSA Certified	0000000	000000	0000000	00000
3 Circuits Controlled with 3 Off (Normally Open) or 3 On (Normally Closed)—3PDT
11	12V DC	112	10A	1.4"	1.4"	2.1"	UL Recognized Component, CSA Certified	0000000	00000	0000000	0000

Premium Circular-Pin Relays

8-Terminal Relay

11-Terminal Relay

Relay Socket for
8-Terminal
Relay

Relay Socket for 11-Terminal Socket

Built to handle tough, repetitive-use applications, these are more durable than standard relays. The circular pin terminals plug into relay sockets for easy installation. Also known as ice cube relays.

Relay sockets (sold separately) mount to 35 mm DIN rail or flat surfaces.

Relays											Relay Sockets
Number of Terminals	Input Voltage	Control Current, mA	Switching Current @ 240V AC/28V DC	hp @ Switching Voltage	Ht.	Wd.	Dp.	Specifications Met		Each		Each
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT
8	12V DC	100	10A	1/3 hp @ 120 V AC 1/2 hp @ 240 V AC	1.4"	1.4"	2"	UL Recognized Component CSA Certified	0000000	000000	0000000	00000
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT
8	12V DC	100	10A	1/3 hp @ 120 V AC 1/2 hp @ 240 V AC	1.4"	1.4"	2"	UL Recognized Component CSA Certified	0000000	00000	0000000	0000
3 Circuits Controlled with 3 Off (Normally Open) or 3 On (Normally Closed)—3PDT
11	12V DC	100	10A	1/3 hp @ 120 V AC 1/2 hp @ 240 V AC	1.4"	1.4"	2"	UL Recognized Component CSA Certified	0000000	00000	0000000	0000

PC-Board Pin Relays

5 Terminals

8 Terminals

Solder these relays to a printed circuit board. Use them to switch small motors and pilot lights.

For technical drawings and 3-D models, click on a part number.

					Mechanical Life Cycles
Number of Terminals	Input Voltage	Control Current, mA	Switching Current @ 250V AC/30V DC	Max. Switching Voltage	For AC Voltage	For DC Voltage	Ht.	Wd.	Dp.	Pin Lg.	Specifications Met		Each
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT
5	12V DC	44	10A	380V AC/125V DC	10,000,000	20,000,000	1.1"	0.5"	1"	0.16"	UL Recognized Component CSA Certified CE Marked	0000000	00000
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT
8	12V DC	44	5A	380V AC/125V DC	10,000,000	20,000,000	1.1"	0.5"	1"	0.16"	UL Recognized Component CSA Certified CE Marked	0000000	0000

Enclosed Medium-Current Relays

2 Circuits

The built-in enclosure protects contacts from dust and dirt. These relays accept voltage drops up to 50% of the rated voltage without switching. Use them with industrial automation systems, security and emergency lighting, and small motors. Also known as power relays.

			Switching Current @ Voltage
Number of Terminals	Input Voltage	Control Current, mA	Off (Normally Open) Circuit Position	hp @ Switching Voltage	Ht.	Wd.	Dp.	Quick-Disconnect Tab Wd.	Specifications Met		Each
2 Circuits Controlled with 2 Off (Normally Open)—DPST-NO
With Quick-Disconnect Terminals
6	12V DC	158	25 A @ 220 V AC	1 1/2 hp @ 120 V AC 2 hp @ 240 V AC 2 hp @ 277 V AC	1.3"	2.7"	1.9"	0.25"	UL Recognized Component, CSA Certified, CE Marked	0000000	000000

Medium-Current Relays

1 Circuit

2 Circuits

Use these relays with industrial automation systems, security and emergency lighting, and small motors. Also known as power relays.

Optional covers protect contacts from dust and dirt.

Relays
			Switching Current									Optional Covers
Number of Terminals	Input Voltage	Control Current, mA	@ 120V AC	@ 28V DC	hp @ Switching Voltage	Ht.	Wd.	Dp.	Specifications Met		Each		Each
1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO
4	12V DC	167	30A	30A	1 1/2 hp @ 120 V AC 1 1/2 hp @ 240 V AC	2.5"	2.5"	2.2"	UL Listed C-UL Listed	0000000	000000	0000000	000000
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT
5	12V DC	167	30A	30A	1 1/2 hp @ 120 V AC 1 1/2 hp @ 240 V AC	2.5"	2.5"	2.2"	UL Listed C-UL Listed	0000000	00000	0000000	00000
2 Circuits Controlled with 2 Off (Normally Open)—DPST-NO
6	12V DC	167	30A	30A	1 1/2 hp @ 120 V AC 1 1/2 hp @ 240 V AC	2.5"	2.5"	2.2"	UL Listed C-UL Listed	0000000	00000	0000000	00000
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT
8	12V DC	167	30A	30A	1 1/2 hp @ 120 V AC 1 1/2 hp @ 240 V AC	3.3"	2.5"	2.4"	UL Listed C-UL Listed	0000000	00000	0000000	00000

High-Starting-Current Vehicle Relays

5-Terminal Relay for Relay Socket

4-Terminal Relay for
Relay Socket and
Surface Mounting

5-Terminal Relay for Relay Socket and Surface Mounting

Relay Socket with Wire Leads

Relay Socket with Crimp-On Terminals

Also known as automotive relays, these relays can handle high starting (inrush) currents.

Relays for surface mounting have a tab for added security in high-vibration applications.

Relays
		Switching Current @ Voltage										Relay Sockets with Crimp-On Terminals		Relay Sockets with Wire Leads
Number of Terminals	Input Voltage	Off (Normally Open) Circuit Position	On (Normally Closed) Circuit Position	Max. Starting Current, A	Control Current, mA	Ht.	Wd.	Dp.	Quick-Disconnect Tab Wd.		Each		Each		Each
For Relay Socket
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT
5	12V DC	30 A @ 12 V DC	20 A @ 12 V DC	150	138	1.02"	1.02"	0.94"	0.25"	0000000	00000	0000000	00000	0000000	000000
For Relay Socket and Surface Mounting
1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO
4	12V DC	50 A @ 12 V DC	__	150	138	1.2"	1"	1"	0.25" and 0.375"	0000000	00000	0000000	0000	0000000	00000
5	12V DC	40 A @ 12 V DC	__	150	141	1"	1"	0.9"	0.25"	0000000	00000	0000000	0000	0000000	00000
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT
5	12V DC	30 A @ 12 V DC	20 A @ 12 V DC	150	138	1.1"	1.1"	1"	0.25"	0000000	0000	0000000	0000	0000000	00000

Weatherproof High-Starting-Current Vehicle Relays

Relay

Relay Socket with
Crimp-On
Terminals

Relay Socket with Wire Leads

The extended housing covers and protects terminals. Also known as automotive relays, they can handle high starting (inrush) currents. They have a tab for added security in high-vibration applications.

Relays
		Switching Current @ Voltage										Relay Sockets with Crimp-On Terminals		Relay Sockets with Wire Leads
Number of Terminals	Input Voltage	Off (Normally Open) Circuit Position	On (Normally Closed) Circuit Position	Max. Starting Current, A	Control Current, mA	Ht.	Wd.	Dp.	Quick-Disconnect Tab Wd.		Each		Each		Each
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT
5	12V DC	30 A @ 12 V DC	20 A @ 12 V DC	150	138	1.4"	1.4"	1.8"	0.25"	0000000	00000	0000000	000000	0000000	000000

Long-Life High-Starting-Current Vehicle Relays

Relay

Relay Socket with Wire Leads

Relay Socket with Crimp-On Terminals

With no moving parts, these solid state relays have an extended service life. They can handle high starting (inrush) currents. Also known as automotive relays.

Relays											Relay Sockets with Crimp-On Terminals		Relay Sockets with Wire Leads
Number of Terminals	Input Voltage	Switching Current @ 12V DC	Max. Starting Current, A	Control Current, mA	Ht.	Wd.	Dp.	Quick-Disconnect Tab Wd.		Each		Each		Each
1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO
4	12V DC	20A	80	10	1.1"	1.1"	1"	0.25"	0000000	000000	0000000	00000	0000000	000000

Water-Resistant High-Current Vehicle Relays

8VA and 12VA Control Power

8.1VA Control Power

These relays are suitable for DC-powered equipment such as forklifts, floor scrubbers, and trucks. Rated for continuous operation for cycles that run longer than 30 seconds.

For technical drawings and 3-D models, click on a part number.

1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO
Number of Terminals	Input Voltage	Control Power, VA	Full Load Switching Current @ Voltage	Ht.	Wd.	Dp.	Wire Connection Type	Stud Thread Size		Each
4	12V DC	8	200 A @ 12 V DC	3.7"	3.3"	2.9"	Stud Terminals	5/16"-24	0000000	000000
4	12V DC	8.1	100 A @ 12 V DC	2.9"	3.3"	2.1"	Stud Terminals	5/16"-24	0000000	00000
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT
6	12V DC	12	100 A @ 12 V DC	4.6"	3.3"	2.9"	Stud Terminals	5/16"-24	0000000	00000

High-Current Vehicle Relays

12VA Control Power

9VA Control Power

These relays are suitable for DC-powered equipment such as forklifts, floor scrubbers, and trucks. They are rated for continuous operation for cycles that run longer than 30 seconds.

3-terminal relays require the same input and switching voltage. 4- and 6-terminal relays allow different input and switching voltages.

For technical drawings and 3-D models, click on a part number.

1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO
Number of Terminals	Input Voltage	Control Power, VA	Full Load Switching Current @ Voltage	Ht.	Wd.	Dp.	Wire Connection Type	Stud Thread Size	Features		Each
3	12V DC	12	100 A @ 12 V DC	3.6"	3.1"	2.2"	Stud Terminals	5/16"-24	__	0000000	000000
4	12V DC	9	80 A @ 12 V DC	2.5"	3.5"	2.4"	Stud Terminals	5/16"-24	__	0000000	00000
4	12V DC	9	80 A @ 12 V DC	2.5"	3.5"	2.4"	Stud Terminals	5/16"-24	Grounding Cord with Ring Terminal	0000000	00000
4	12V DC	12	100 A @ 12 V DC	3.6"	3.1"	2.2"	Stud Terminals	5/16"-24	__	0000000	00000
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT
6	12V DC	12	100 A @ 12 V DC	4.7"	3.1"	2.2"	Stud Terminals	5/16"-24	__	0000000	00000

Sequenced Latching Relays

These relays switch through a series of different circuit configurations every time they receive an input voltage. The input voltage latches them in position, so they don’t require a constant voltage to stay switched. Use them to control motors, pumps, and lighting. The covered terminals prevent contact with live connections. Mount to 35 mm DIN rail. Also known as step relays.

For technical drawings and 3-D models, click on a part number.

1 Circuit Controlled—SPST-NO
Switch Starting Position	Input Voltage	Control Power	Switching Current @ 24V AC/120V AC	Max. Switching Voltage	hp @ Switching Voltage	Ht.	Wd.	Dp.		Each
With 4 Terminals
1st Signal—1 Off (Normally Open) 2nd Signal—1 On (Normally Closed)	12V DC	5W	16A	277V AC	1/2 hp @ 120 V AC	3.3"	0.7"	2.4"	00000000	000000
2 Circuits Controlled—DPST-1NO/1NC
With 6 Terminals
1st Signal—1 Off (Normally Open) and 1 On (Normally Closed) 2nd Signal—1 On (Normally Closed) and 1 Off (Normally Open)	12V DC	5W	16A	277V AC	1/2 hp @ 120 V AC	3.3"	0.7"	2.4"	00000000	00000
2 Circuits Controlled—DPST-NO
With 6 Terminals
1st Signal—2 Off (Normally Open) 2nd Signal—2 On (Normally Closed)	12V DC	5W	16A	277V AC	1/2 hp @ 120 V AC	3.3"	0.7"	2.4"	00000000	00000
1st Signal—2 Off (Normally Open) 2nd Signal—1 On (Normally Closed) and 1 Off (Normally Open) 3rd Signal—2 On (Normally Closed)	12V DC	5W	16A	277V AC	1/2 hp @ 120 V AC	3.3"	0.7"	2.4"	00000000	00000

Latching Relays

9-Terminal Relay

10-Terminal Relay

10-Terminal Relay Socket

9-Terminal Relay Socket

A single, momentary input voltage switches these relays and latches them in position, so they don't require a constant input voltage to stay switched. A second momentary voltage will release the latch.

Relay sockets (sold separately) mount to 35 mm DIN rail.

Relays												Relay Sockets
Number of Terminals	Input Voltage	Control Current, mA	Switching Current @ 240V AC/28V DC	hp @ Switching Voltage	Ht.	Wd.	Dp.	Quick-Disconnect Tab Wd.	Specifications Met		Each		Each
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT
9	12V DC	100	10A	1/3 hp @ 120 V AC 1/2 hp @ 240 V AC	1.4"	1.5"	1.9"	0.187"	UL Recognized Component CSA Certified	0000000	000000	0000000	000000
10	12V DC	110	5A	__	1.1"	0.8"	1.4"	0.102"	UL Recognized Component CSA Certified	0000000	00000	0000000	00000

Ultra-Thin Signal Relays with Socket

Plug these relays into the included socket for fast installation; they disconnect for easy replacement. Relays are extra narrow to maximize space inside your control cabinet. Use them with circuits that control electrical signals. Mount to 35 mm DIN rail.

Relays												Replacement Relays
Number of Terminals	Input Voltage	Control Current, mA	Switching Current @ 250V AC	Max. Switching Voltage	Ht.	Wd.	Dp.	Features	Specifications Met		Each		Each
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT
5	12V AC/12V DC	16	6A	400V AC	3.5"	0.2"	3"	Power Indicator	UL Recognized Component, C-UL Recognized Component	0000000	000000	0000000	00000

Socket-Mount Multifunction Timer Relays

Relay

Relay Socket

Plug relays into relay sockets for fast installation and replacement. They provide a variety of timing functions in one relay.

Relay socket (sold separately) mounts to 35 mm DIN rail or flat surfaces.

Relays
				Timing Range									Relay Sockets
Number of Terminals	Input Voltage	Control Current, mA	Timer Relay Function	No. of	Overall	Switching Current @ 240V AC	Ht.	Wd.	Dp.	Specifications Met		Each		Each
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT
11	12V DC	167	Delayed Start (Delay-on-Make) Interval Switch-On (Single-Shot) Delayed Switch-Off (Delay-on-Break) Repeat Cycle	5	0.05 sec.-999 min.	10A	2.4"	1.8"	3.7"	UL Recognized Component	0000000	0000000	0000000	00000

Socket-Mount Timer Relays

Relay

Relay Socket for
8-Terminal
Relay

Plug relays into relay sockets for fast installation and replacement. Use them in applications where machinery needs to turn on or off after a set period of time, such as in paint and conveyor lines.

Relay socket (sold separately) mounts to 35 mm DIN rail or flat surfaces.

For technical drawings and 3-D models, click on a part number.

Timer Relays
			Timing Range		Switching Current					Relay Sockets
Number of Terminals	Input Voltage	Control Current, mA	No. of	Overall	@ 240V AC	@ 28V DC	Specifications Met		Each		Each
Delayed Start (Delay-on-Make)
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT
8	12V DC	170	1	0.1 sec.-10 sec.	10A	8A	UL Recognized Component CSA Certified CE Marked	0000000	000000	0000000	00000
8	12V DC	170	1	0.6 sec.-60 sec.	10A	8A	UL Recognized Component CSA Certified CE Marked	0000000	00000	0000000	0000
Repeat Cycle
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT
8	12V DC	170	1	1.8 sec.-180 sec.	10A	8A	UL Recognized Component CSA Certified CE Marked	0000000	00000	0000000	0000

Wide-Range Socket-Mount Timer Relays

Delayed Start

Delayed Switch-Off, Interval, Repeat Cycle, and Switch-On

Relay Socket

Postpone starts longer and set wider intervals than with most timer relays. These relays plug into relay sockets for fast installation and replacement.

Relay socket (sold separately) mounts to 35 mm DIN rail or flat surfaces.

For technical drawings and 3-D models, click on a part number.

Timer Relays
			Timing Range										Relay Sockets
Number of Terminals	Input Voltage	Control Current, mA	No. of	Overall	Switching Current @ Voltage	hp @ Voltage	Ht.	Wd.	Dp.	Specifications Met		Each		Each
Delayed Start (Delay-on-Make)
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT
8	12V DC	271	5	0.05 sec.-999 min.	10 A @ 240 V AC	__	2.4"	1.75"	2.9"	UL Recognized Component	000000	0000000	0000000	00000
Delayed Switch-Off (Delay-on-Break)
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT
8	12V DC	271	1	1 sec.-1,023 sec.	10 A @ 240 V AC/28 V DC	0.33 hp @ 240 V AC	2.38"	1.75"	2.9"	UL Recognized Component	00000000	00000	0000000	0000
Interval
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT
8	12V DC	271	1	1 sec.-1,023 sec.	10 A @ 240 V AC/28 V DC	0.33 hp @ 240 V AC	2.4"	1.7"	2.9"	UL Recognized Component	00000000	000000	0000000	0000
Repeat Cycle
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT
8	12V DC	271	1	1 sec.-1,023 sec.	10 A @ 240 V AC/28 V DC	0.33 hp @ 240 V AC	2.4"	1.7"	2.9"	UL Recognized Component	00000000	000000	0000000	0000
Switch-On (Single-Shot)
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT
8	12V DC	271	1	1 sec.-1,023 sec.	10 A @ 240 V AC/28 V DC	0.33 hp @ 240 V AC	2.4"	1.7"	2.9"	UL Recognized Component	00000000	00000	0000000	0000

Long-Life Surface-Mount Timer Relays

With no moving parts, these solid state relays have an extended service life. Use the mounting hole to attach to a flat surface. A potentiometer (variable switch) adjusts the delay within the range.

For technical drawings and 3-D models, click on a part number.

Timer Relays
			Timing Range											Potentiometers
Number of Terminals	Input Voltage	Control Current, mA	No. of	Overall	Switching Current @ 120V AC	Ht.	Wd.	Dp.	Quick-Disconnect Tab Wd.	Features	Specifications Met		Each		Each
Delayed Start (Delay-on-Make)
1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO
2	12V AC/12V DC	21	1	0.05 sec.-1 sec.	1A	2"	2"	0.89"	0.25"	Potentiometer	UL Recognized Component	000000000	000000	000000	00
2	12V AC/12V DC	21	1	0.25 sec.-5 sec.	1A	2"	2"	0.89"	0.25"	Potentiometer	UL Recognized Component	000000000	00000	000000	00
2	12V AC/12V DC	21	1	0.5 sec.-10 sec.	1A	2"	2"	0.89"	0.25"	Potentiometer	UL Recognized Component	000000000	00000	000000	00
2	12V AC/12V DC	21	1	3 sec.-60 sec.	1A	2"	2"	0.89"	0.25"	Potentiometer	UL Recognized Component	000000000	00000	000000	00
2	12V AC/12V DC	21	1	15 sec.-300 sec.	1A	2"	2"	0.89"	0.25"	Potentiometer	UL Recognized Component	000000000	00000	000000	00
2	12V AC/12V DC	21	1	30 sec.-10 min.	1A	2"	2"	0.89"	0.25"	Potentiometer	UL Recognized Component	000000000	00000	000000	00
Delayed Switch-Off (Delay-on-Break)
1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO
7	12V DC	217	1	0.25 sec.-5 sec.	1A	2"	2"	0.88"	0.25"	__	UL Recognized Component	00000000	00000	00000000	000000
7	12V DC	217	1	0.5 sec.-10 sec.	1A	2"	2"	0.88"	0.25"	__	UL Recognized Component	00000000	00000	00000000	00000
7	12V DC	217	1	3 sec.-60 sec.	1A	2"	2"	0.88"	0.25"	__	UL Recognized Component	00000000	00000	00000000	00000
Switch-On (Single-Shot)
1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO
7	12V DC	217	1	0.25 sec.-5 sec.	1A	2"	2"	0.88"	0.25"	__	UL Recognized Component	00000000	00000	00000000	00000
7	12V DC	217	1	0.5 sec.-10 sec.	1A	2"	2"	0.88"	0.25"	__	UL Recognized Component	00000000	00000	00000000	00000
7	12V DC	217	1	3 sec.-60 sec.	1A	2"	2"	0.88"	0.25"	__	UL Recognized Component	00000000	00000	00000000	00000

Surface-Mount Timer Relays

Use the mounting hole to attach these relays to a flat surface. A potentiometer (variable switch) adjusts the delay within the range.

For technical drawings and 3-D models, click on a part number.

			Timing Range
Number of Terminals	Input Voltage	Control Current, mA	Number of	Overall	Switching Current @ 250V AC	Ht.	Wd.	Dp.	Quick-Disconnect Tab Wd.	Specifications Met		Each
Delayed Start (Delay-on-Make)
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT
5	12V DC	292	1	3 sec.-60 sec.	8A	2"	2"	0.9"	0.25"	UL Recognized Component	000000000	000000
5	12V DC	292	1	15 sec.-300 sec.	8A	2"	2"	0.9"	0.25"	UL Recognized Component	000000000	00000

Compact Programmable Logic Controllers

Smaller than other PLCs, these controllers save space in your control cabinet. They combine the functionality of a relay, timer relay, and switch in one unit, so you can program simple automation jobs. All have two types of delayed start (delay-on-make) and two types of delayed switch-off (delay-on-break) timing functions. They have passed strict U.S. and Canadian safety standards, and they’re IP20, which prevents fingers and other objects from making contact with live circuits. Mount them to a 35-mm DIN rail.

Controllers with a display make it easy to monitor or modify your system directly on the unit. Controllers without a display eliminate the risk of accidental adjustments while toggling through information or tampering by unauthorized users.

Program these controllers by connecting them to a computer and installing the required software (sold separately). After the initial programming, these controllers can be updated remotely by a human-machine interface (HMI) or computer.

Add expansion modules to increase the number of inputs and outputs. You can connect up to 11 modules to a controller—for a maximum of 188 inputs and outputs. Choose any modules that support the operating voltage of your controller.

For technical drawings and 3-D models, click on a part number.

Controllers

Controller with Display

Controller without Display

	Digital Inputs		Digital Outputs
Input Signal Type	Voltage	No. of	Voltage	Current	No. of	Signal Type	Operating Voltage	Communication Protocol	Software Included		Each
Controllers with Display
Eaton Easy E4 Series
Digital, Analog	12V DC 24V AC 24V DC 0-10V DC	8 (4 can be analog)	240V AC	8A	4	Relay	12V DC 24V AC 24V DC	Modbus TCP/IP	No	000000	0000000
Controllers without Display
Eaton Easy E4 Series
Digital, Analog	12V DC 24V AC 24V DC 0-10V DC	8 (4 can be analog)	240V AC	8A	4	Relay	12V DC 24V AC 24V DC	Modbus TCP/IP	No	0000000	000000

Software

For Eaton Easy E4 Series
Manufacturer Model Number	For Operating System	Media Type		Each
EASYSOFT-SWLIC/EasySoft 7	Windows 7, Windows 8, Windows 8.1, Windows 10	Download	000000	000000

Digital Expansion Modules

Digital Expansion Module

Inputs		Outputs
Voltage	No. of	Voltage	Current	No. of	Signal Type	Operating Voltage		Each
For Eaton Easy E4 Series
12V DC 24V AC 24V DC	4	240V AC	5A	4	Relay	12V DC 24V AC 24V DC	0000000	0000000
12V DC 24V AC 24V DC	8	240V AC	5A	8	Relay	12V DC 24V AC 24V DC	0000000	000000

Email Us

About Relays

About Timer Relays

Compact Spade-Terminal Relays

Thin Spade-Terminal Relays

Spade-Terminal Relays

Long-Life Spade-Terminal Relays

Circular-Pin Relays

Premium Circular-Pin Relays

PC-Board Pin Relays

Enclosed Medium-Current Relays

Medium-Current Relays

High-Starting-Current Vehicle Relays

Weatherproof High-Starting-Current Vehicle Relays

Long-Life High-Starting-Current Vehicle Relays

Water-Resistant High-Current Vehicle Relays

High-Current Vehicle Relays

Sequenced Latching Relays

Latching Relays

Ultra-Thin Signal Relays with Socket

Socket-Mount Multifunction Timer Relays

Socket-Mount Timer Relays

Wide-Range Socket-Mount Timer Relays

Long-Life Surface-Mount Timer Relays

Surface-Mount Timer Relays

Compact Programmable Logic Controllers