Input Voltage Input Voltage | Show |
---|
|
Input Voltage Input Voltage | Hide |
---|
|
Power Power |
---|
Overload Current Range Overload Current Range |
---|
|
Reversing Capability Reversing Capability |
---|
|
Mounting Location Mounting Location |
---|
|
Specifications Met Specifications Met |
---|
|
Auxiliary Contact Switch Starting Position Auxiliary ContactSwitch Starting Position |
---|
|
Overload Protection Class Overload Protection Class |
---|
|
Switch Type Switch Type |
---|
|
Motor Protection Motor Protection |
---|
|
Environment Environment |
---|
|
|
Housing Material Housing Material |
---|
|
Housing Color Housing Color |
---|
![]() | Gray |
More
More
Smaller than standard multifunction timer relays, these relays save space in your control cabinet. They plug into relay sockets for fast installation, and provide a variety of timing functions in one relay.
Relay socket (sold separately) mounts to 35 mm DIN rail or flat surfaces.
Timing Range | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Terminals | Input Voltage | Control Current, mA | Timer Relay Function | No. of | Overall | Switching Current @ 250V AC | Ht. | Wd. | Dp. | Quick-Disconnect Tab Wd. | Specifications Met | Each | |
4 Circuits Controlled with 4 Off (Normally Open) or 4 On (Normally Closed)—4PDT | |||||||||||||
14 | 200-230V AC | 9 | Delayed Start (Delay-on-Make) Interval Repeat Cycle | 4 | 0.1 sec.-10 min. | 3A | 1.1" | 0.9" | 2.1" | 0.093" | UL Recognized CSA Certified CE Marked | 000000 | 000000 |
Relay Socket | 0000000 | Each | 000000 |
Provide on/off control for a motor and protect it from overloads. These starters shut off the motor if current exceeds the full-load current rating. All have an adjustable overload relay that allows you to set the exact overload current you need.
Note: The full-load current rating of your motor must fall within the starter’s overload current range. Match input voltage, also known as coil voltage, to your control circuit; motor voltage may be different. Look for the full-load current rating on the motor’s faceplate, or estimate the current rating (given the motor’s horsepower and voltage).
Starters with auxiliary contacts can send a signal or connect to another device, such as an alarm or indicating light.
Add auxiliary contact blocks to send a signal or connect to another device, such as an alarm or indicating light.
For technical drawings and 3-D models, click on a part number.
Motor Starters | Auxiliary Contact Blocks: 2 Off (Normally Open) | Auxiliary Contact Blocks: 1 Off (Normally Open), 1 On (Normally Closed) | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Overload Current, A | Input Voltage | Electrical Phase (hp) | Ht. | Wd. | Each | Each | Each | |||
Motor Starters | ||||||||||
20-100 | 200V AC/ 240V AC | Single (5 hp @ 115 V AC) Three (15 hp @ 230 V AC) Three (50 hp @ 480 V AC) | 8.3" | 2.2" | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 000000 |
Motor Starters with 1 Auxiliary Contact—1 Off (Normally Open) | ||||||||||
1-5 | 200V AC/ 240V AC | Single (1/4 hp @ 115 V AC) Single (1 hp @ 230 V AC) Three (2 hp @ 230 V AC) Three (3 hp @ 480 V AC) | 5.6" | 1.8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
1.1-1.6 | 200V AC/ 240V AC | Three (1/2 hp @ 480 V AC) Three (3/4 hp @ 480 V AC) | 4.7" | 1.8" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
1.8-2.5 | 200V AC/ 240V AC | Three (1/2 hp @ 230 V AC) Three (1 hp @ 480 V AC) | 4.7" | 1.8" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
2.3-3.2 | 200V AC/ 240V AC | Single (1/4 hp @ 230 V AC) Three (3/4 hp @ 230 V AC) Three (1 1/2 hp @ 480 V AC) | 4.7" | 1.8" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
3.5-4.8 | 200V AC/ 240V AC | Single (1/6 hp @ 115 V AC) Single (1/3 hp @ 230 V AC) Three (1 hp @ 230 V AC) Three (3 hp @ 480 V AC) | 4.7" | 1.8" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
4-20 | 200V AC/ 240V AC | Single (1 hp @ 115 V AC) Single (2 hp @ 230 V AC) Three (3 hp @ 230 V AC) Three (10 hp @ 480 V AC) | 5.6" | 1.8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
5.5-7.5 | 200V AC/ 240V AC | Single (1/3 hp @ 115 V AC) Single (3/4 hp @ 230 V AC) Three (2 hp @ 230 V AC) Three (5 hp @ 480 V AC) | 4.7" | 1.8" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
9-12.5 | 200V AC/ 240V AC | Single (1/2 hp @ 115 V AC) Single (2 hp @ 230 V AC) Three (3 hp @ 230 V AC) Three (7 1/2 hp @ 480 V AC) | 4.7" | 1.8" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
9-45 | 200V AC/ 240V AC | Single (3 hp @ 115 V AC) Single (5 hp @ 230 V AC) Three (10 hp @ 230 V AC) Three (20 hp @ 480 V AC) | 6.3" | 1.8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
11.3-16 | 200V AC/ 240V AC | Single (1 hp @ 115 V AC) Single (2 hp @ 230 V AC) Three (5 hp @ 230 V AC) Three (10 hp @ 480 V AC) | 4.7" | 1.8" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
17.5-21.5 | 200V AC/ 240V AC | Single (1 1/2 hp @ 115 V AC) Single (3 hp @ 230 V AC) Three (7 1/2 hp @ 230 V AC) Three (15 hp @ 480 V AC) | 4.9" | 2.2" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
24.5-30 | 200V AC/ 240V AC | Single (5 hp @ 230 V AC) Three (10 hp @ 230 V AC) Three (20 hp @ 480 V AC) | 4.9" | 2.2" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
24.5-36 | 200V AC/ 240V AC | Single (3 hp @ 115 V AC) Single (5 hp @ 230 V AC) Three (10 hp @ 230 V AC) Three (25 hp @ 480 V AC) | 5.9" | 2.7" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
35-47 | 200V AC/ 240V AC | Single (7 1/2 hp @ 230 V AC) Three (15 hp @ 230 V AC) Three (30 hp @ 480 V AC) | 5.9" | 2.7" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
45-60 | 200V AC/ 240V AC | Single (5 hp @ 115 V AC) Single (10 hp @ 230 V AC) Three (20 hp @ 230 V AC) Three (40 hp @ 480 V AC) | 6.7" | 3.7" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
58-75 | 200V AC/ 240V AC | Three (25 hp @ 230 V AC) Three (50 hp @ 480 V AC) | 6.7" | 3.7" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
With a shallower depth than most other starters, these fit in narrow spaces. They provide on/off control for a motor and protect it from overloads—starters will shut the motor off if current exceeds the full-load current rating. Set the adjustable overload relay for the exact overload current needed. All have auxiliary contacts to send a signal or connect to another device, such as an alarm or indicating light.
Note: The full-load current rating of your motor must fall within the starter’s overload current range. Match input voltage, also known as coil voltage, to your control circuit; motor voltage may be different. Look for the full-load current rating on the motor’s faceplate, or estimate the current rating (given the motor’s horsepower and voltage).
Add auxiliary contact blocks to signal more devices.
For technical drawings and 3-D models, click on a part number.
Motor Starters | Auxiliary Contact Blocks: 2 Off (Normally Open) | Auxiliary Contact Blocks: 1 Off (Normally Open), 1 On (Normally Closed) | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Overload Current, A | Input Voltage | Electrical Phase (hp) | Ht. | Wd. | Each | Each | Each | |||
Motor Starters with 1 Auxiliary Contact—1 Off (Normally Open) | ||||||||||
1.1-1.6 | 200V AC/ 240V AC | Three (1/2 hp @ 480 V AC) Three (3 hp @ 480 V AC) | 4.2" | 1.8" | 00000000 | 0000000 | 000000 | 000000 | 000000 | 000000 |
1.8-2.5 | 200V AC/ 240V AC | Three (1/2 hp @ 230 V AC) Three (1 hp @ 480 V AC) | 4.2" | 1.8" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
2.3-3.2 | 200V AC/ 240V AC | Single (1/4 hp @ 230 V AC) Three (3/4 hp @ 230 V AC) Three (1 1/2 hp @ 480 V AC) | 4.2" | 1.8" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
3.5-4.8 | 200V AC/ 240V AC | Single (1/6 hp @ 115 V AC) Single (1/3 hp @ 230 V AC) Three (1 hp @ 230 V AC) Three (3 hp @ 480 V AC) | 4.2" | 1.8" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
5.5-7.5 | 200V AC/ 240V AC | Single (1/3 hp @ 115 V AC) Single (3/4 hp @ 230 V AC) Three (2 hp @ 230 V AC) | 4.2" | 1.8" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
Sized to fit in tight spaces, these starters have a shorter height and narrower depth than most other starters. A NEMA 4X rated enclosure protects them from corrosion and washdowns. They provide on/off control for a motor and protect it from overloads—starters will shut the motor off if current exceeds the full-load current rating. Set the adjustable overload relay for the exact overload current needed. All have auxiliary contacts to send a signal or connect to another device, such as an alarm or indicating light.
Note: The full-load current rating of your motor must fall within the starter’s overload current range. Match input voltage, also known as coil voltage, to your control circuit; motor voltage may be different. Look for the full-load current rating on the motor’s faceplate, or estimate the current rating (given the motor’s horsepower and voltage).
Add auxiliary contact blocks to signal more devices.
For technical drawings and 3-D models, click on a part number.
Motor Starters | Auxiliary Contact Blocks: 2 Off (Normally Open) | Auxiliary Contact Blocks: 1 Off (Normally Open), 1 On (Normally Closed) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Overload Current, A | Input Voltage | Electrical Phase (hp) | Ht. | Wd. | Environmental Rating | Specifications Met | Each | Each | Each | |||
Motor Starters with 1 Auxiliary Contact—1 Off (Normally Open) | ||||||||||||
1.1-1.6 | 200V AC/ 240V AC | Three (1/2 hp @ 480 V AC) Three (3/4 hp @ 480 V AC) | 5.9" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 0000000 | 000000 | 000000 | 000000 | 000000 |
1.8-2.5 | 200V AC/ 240V AC | Three (1/2 hp @ 230 V AC) Three (1 hp @ 480 V AC) | 5.9" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
2.3-3.2 | 200V AC/ 240V AC | Single (1/4 hp @ 230 V AC) Three (3/4 hp @ 230 V AC) Three (1 1/2 hp @ 480 V AC) | 5.9" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
3.5-4.8 | 200V AC/ 240V AC | Single (1/6 hp @ 115 V AC) Single (1/3 hp @ 230 V AC) Three (1 1/2 hp @ 480 V AC) | 5.9" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
5.5-7.5 | 200V AC/ 240V AC | Single (1/3 hp @ 115 V AC) Single (3/4 hp @ 230 V AC) Three (2 hp @ 230 V AC) | 5.9" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
The NEMA 4X rated enclosure protects these starters from corrosion and washdowns. They provide on/off control for a motor and protect it from overloads—starters will shut the motor off if current exceeds the full-load current rating. Set the adjustable overload relay for the exact overload current needed. All have auxiliary contacts to send a signal or connect to another device, such as an alarm or indicating light.
Note: The full-load current rating of your motor must fall within the starter’s overload current range. Match input voltage, also known as coil voltage, to your control circuit; motor voltage may be different. Look for the full-load current rating on the motor’s faceplate, or estimate the current rating (given the motor’s horsepower and voltage).
Add auxiliary contact blocks to signal more devices.
For technical drawings and 3-D models, click on a part number.
Motor Starters | Auxiliary Contact Blocks: 2 Off (Normally Open) | Auxiliary Contact Blocks: 1 Off (Normally Open), 1 On (Normally Closed) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Overload Current, A | Input Voltage | Electrical Phase (hp) | Ht. | Wd. | Environmental Rating | Specifications Met | Each | Each | Each | |||
Motor Starters with 1 Auxiliary Contact—1 Off (Normally Open) | ||||||||||||
1-5 | 200V AC/ 240V AC | Single (1/4 hp @ 115 V AC) Single (1 hp @ 230 V AC) Three (2 hp @ 230 V AC) Three (3 hp @ 480 V AC) | 9.5" | 6.19" | NEMA 4X, IP66 | UL Listed, CSA Certified, IEC European Standards | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 000000 |
1.1-1.6 | 200V AC/ 240V AC | Three (1/2 hp @ 480 V AC) Three (3/4 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
1.8-2.5 | 200V AC/ 240V AC | Three (1/2 hp @ 230 V AC) Three (1 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
2.3-3.2 | 200V AC/ 240V AC | Single (1/4 hp @ 230 V AC) Three (3/4 hp @ 230 V AC) Three (1 1/2 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
3.5-4.8 | 200V AC/ 240V AC | Single (1/6 hp @ 115 V AC) Single (1/3 hp @ 230 V AC) Three (1 hp @ 230 V AC) Three (3 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
4-20 | 200V AC/ 240V AC | Single (1 hp @ 115 V AC) Single (2 hp @ 230 V AC) Three (3 hp @ 230 V AC) Three (10 hp @ 480 V AC) | 9.5" | 6.19" | NEMA 4X, IP66 | UL Listed, CSA Certified, IEC European Standards | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
5.5-7.5 | 200V AC/ 240V AC | Single (1/3 hp @ 115 V AC) Single (3/4 hp @ 230 V AC) Three (2 hp @ 230 V AC) Three (5 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
9-12.5 | 200V AC/ 240V AC | Single (1/2 hp @ 115 V AC) Single (2 hp @ 230 V AC) Three (3 hp @ 230 V AC) Three (7 1/2 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
9-45 | 200V AC/ 240V AC | Single (3 hp @ 115 V AC) Single (5 hp @ 230 V AC) Three (10 hp @ 230 V AC) Three (20 hp @ 480 V AC) | 9.5" | 6.19" | NEMA 4X, IP66 | UL Listed, CSA Certified, IEC European Standards | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
11.3-16 | 200V AC/ 240V AC | Single (1 hp @ 115 V AC) Single (2 hp @ 230 V AC) Three (5 hp @ 230 V AC) Three (10 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
17.5-21.5 | 200V AC/ 240V AC | Single (1 1/2 hp @ 115 V AC) Single (3 hp @ 230 V AC) Three (7 1/2 hp @ 230 V AC) Three (15 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
24.5-30 | 200V AC/ 240V AC | Single (5 hp @ 230 V AC) Three (10 hp @ 230 V AC) Three (20 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
24.5-36 | 200V AC/ 240V AC | Single (3 hp @ 115 V AC) Single (5 hp @ 230 V AC) Three (10 hp @ 230 V AC) Three (25 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
35-47 | 200V AC/ 240V AC | Single (7 1/2 hp @ 230 V AC) Three (15 hp @ 230 V AC) Three (30 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
45-60 | 200V AC/ 240V AC | Single (5 hp @ 115 V AC) Single (10 hp @ 230 V AC) Three (20 hp @ 230 V AC) Three (40 hp @ 480 V AC) | 11.8" | 8.7" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
58-75 | 200V AC/ 240V AC | Three (25 hp @ 230 V AC) Three (50 hp @ 480 V AC) | 11.8" | 8.7" | NEMA 4X, IP55 | UL Recognized Component, IEC European Standards | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
Motor Starters with 2 Auxiliary Contacts—1 Off (Normally Open), 1 On (Normally Closed) | ||||||||||||
20-100 | 200V AC/ 240V AC | Single (5 hp @ 115 V AC) Single (15 hp @ 230 V AC) Three (25 hp @ 230 V AC) Three (50 hp @ 480 V AC) | 11.7" | 9.3" | NEMA 4X, IP66 | UL Listed, CSA Certified, IEC European Standards | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Use these starters with motors that run forward and backward, such as motors for conveyor belts. They provide on/off control and protect motors from overloads—starters will shut the motor off if current exceeds the full-load current rating. Set the adjustable overload relay for the exact overload current needed. All have auxiliary contacts to send a signal or connect to another device, such as an alarm or indicating light.
Note: The full-load current rating of your motor must fall within the starter’s overload current range. Match input voltage, also known as coil voltage, to your control circuit; motor voltage may be different. Look for the full-load current rating on the motor’s faceplate, or estimate the current rating (given the motor’s horsepower and voltage).
Add auxiliary contact blocks to signal more devices.
For technical drawings and 3-D models, click on a part number.
Motor Starters | Auxiliary Contact Blocks: 2 Off (Normally Open) | Auxiliary Contact Blocks: 1 Off (Normally Open), 1 On (Normally Closed) | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Overload Current, A | Input Voltage | Electrical Phase (hp) | Ht. | Wd. | Each | Each | Each | |||
Motor Starters with 1 Auxiliary Contact—1 On (Normally Closed) | ||||||||||
1.1-1.6 | 200V AC/ 240V AC | Three (1/3 hp @ 230 V AC) Three (3 hp @ 480 V AC) | 4.7" | 4" | 00000000 | 0000000 | 000000 | 000000 | 000000 | 000000 |
1.8-2.5 | 200V AC/ 240V AC | Three (1/2 hp @ 230 V AC) Three (1 hp @ 480 V AC) | 4.7" | 4" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
2.3-3.2 | 200V AC/ 240V AC | Three (3/4 hp @ 230 V AC) Three (1 1/2 hp @ 480 V AC) | 4.7" | 4" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
3.5-4.8 | 200V AC/ 240V AC | Three (1 hp @ 230 V AC) Three (3 hp @ 480 V AC) | 4.7" | 4" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
5.5-7.5 | 200V AC/ 240V AC | Three (2 hp @ 230 V AC) | 4.7" | 4" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
9-12.5 | 200V AC/ 240V AC | Three (3 hp @ 230 V AC) Three (7 1/2 hp @ 480 V AC) | 4.7" | 4" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
11.3-16 | 200V AC/ 240V AC | Three (5 hp @ 230 V AC) Three (10 hp @ 480 V AC) | 4.7" | 4" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
Motor Starters with 2 Auxiliary Contacts—1 Off (Normally Open), 1 On (Normally Closed) | ||||||||||
17.5-21.5 | 200V AC/ 240V AC | Three (15 hp @ 480 V AC) | 4.9" | 4.7" | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
20-100 | 200V AC/ 240V AC | Single (5 hp @ 115 V AC) Single (15 hp @ 230 V AC) Three (25 hp @ 230 V AC) Three (50 hp @ 480 V AC) | 8.3" | 4.4" | 00000000 | 00000000 | 00000000 | 00000 | 00000000 | 00000 |
Motor Starters with 3 Auxiliary Contacts—2 Off (Normally Open), 1 On (Normally Closed) | ||||||||||
1-5 | 200V AC/ 240V AC | Single (1/4 hp @ 115 V AC) Single (1 hp @ 230 V AC) Three (2 hp @ 230 V AC) Three (3 hp @ 480 V AC) | 5.6" | 3.6" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
4-20 | 200V AC/ 240V AC | Single (1 hp @ 115 V AC) Single (2 hp @ 230 V AC) Three (3 hp @ 230 V AC) Three (10 hp @ 480 V AC) | 5.6" | 3.6" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
9-45 | 200V AC/ 240V AC | Single (3 hp @ 115 V AC) Single (5 hp @ 230 V AC) Three (10 hp @ 230 V AC) Three (20 hp @ 480 V AC) | 6.3" | 3.6" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Rated NEMA 4X, these enclosed starters are protected from corrosion and washdowns. Use them with motors that run forward and backward, such as motors for conveyor belts. They provide on/off control and protect motors from overloads—starters will shut the motor off if current exceeds the full-load current rating. Set the adjustable overload relay for the exact overload current needed. All have auxiliary contacts to send a signal or connect to another device, such as an alarm or indicating light. Note: The full-load current rating of your motor must fall within the starter’s overload current range. Match input voltage, also known as coil voltage, to your control circuit; motor voltage may be different. Look for the full-load current rating on the motor’s faceplate, or estimate the current rating (given the motor’s horsepower and voltage).
Add auxiliary contact blocks to signal more devices.
For technical drawings and 3-D models, click on a part number.
Motor Starters | Auxiliary Contact Blocks: 2 Off (Normally Open) | Auxiliary Contact Blocks: 1 Off (Normally Open), 1 On (Normally Closed) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Overload Current, A | Input Voltage | Electrical Phase (hp) | Ht. | Wd. | Environmental Rating | Specifications Met | Each | Each | Each | |||
Motor Starters with 1 Auxiliary Contact—1 On (Normally Closed) | ||||||||||||
1.1-1.6 | 200V AC/ 240V AC | Three (1/3 hp @ 230 V AC) Three (3/4 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | IEC European Standards, UL Recognized Component | 00000000 | 0000000 | 000000 | 000000 | 000000 | 000000 |
1.8-2.5 | 200V AC/ 240V AC | Three (1/2 hp @ 230 V AC) Three (1 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | IEC European Standards, UL Recognized Component | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
2.3-3.2 | 200V AC/ 240V AC | Three (3/4 hp @ 230 V AC) Three (1 1/2 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | IEC European Standards, UL Recognized Component | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
3.5-4.8 | 200V AC/ 240V AC | Three (1 hp @ 230 V AC) Three (3 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | IEC European Standards, UL Recognized Component | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
5.5-7.5 | 200V AC/ 240V AC | Three (2 hp @ 230 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | IEC European Standards, UL Recognized Component | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
9-12.5 | 200V AC/ 240V AC | Three (3 hp @ 230 V AC) Three (7 1/2 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | IEC European Standards, UL Recognized Component | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
11.3-16 | 200V AC/ 240V AC | Three (5 hp @ 230 V AC) Three (10 hp @ 480 V AC) | 8.7" | 5.9" | NEMA 4X, IP55 | IEC European Standards, UL Recognized Component | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
Motor Starters with 2 Auxiliary Contacts—1 Off (Normally Open), 1 On (Normally Closed) | ||||||||||||
17.5-21.5 | 200V AC/ 240V AC | Three (15 hp @ 480 V AC) | 11.8" | 8.7" | NEMA 4X, IP55 | IEC European Standards, UL Recognized Component | 00000000 | 000000 | 000000 | 00000 | 000000 | 00000 |
Motor Starters with 3 Auxiliary Contacts—1 On (Normally Closed), 2 Off (Normally Open) | ||||||||||||
1-5 | 200V AC/ 240V AC | Single (1/4 hp @ 115 V AC) Single (1 hp @ 230 V AC) Three (2 hp @ 230 V AC) Three (3 hp @ 480 V AC) | 11" | 7.9" | NEMA 4X, IP66 | UL Listed, CSA Certified, IEC European Standards | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
4-20 | 200V AC/ 240V AC | Single (1 hp @ 115 V AC) Single (2 hp @ 230 V AC) Three (3 hp @ 230 V AC) Three (10 hp @ 480 V AC) | 11" | 7.9" | NEMA 4X, IP66 | UL Listed, CSA Certified, IEC European Standards | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Plug these monitors into relay sockets for fast installation and replacement. They protect electric motors from phase loss, phase reversal, overvoltage, undervoltage, and voltage imbalance. Also known as voltage-monitoring relays, they cut power to a motor when a fault occurs.
Relay sockets (sold separately) mount to 35 mm DIN rail or flat surfaces.
Switching | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Input Voltage Range | No. of Terminals | Control Power, W | Voltage Imbalance Adjustment | Trip Time, sec. | Reset Type | Current, A | Voltage | Ht. | Wd. | Specifications Met | Each | |
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT | ||||||||||||
Three Phase | ||||||||||||
200-480V AC | 8 | 5 | 2%-10% | 0.25-30 | Automatic | 10 | 240V AC | 2.4" | 1.8" | UL Recognized, CSA Certified | 0000000 | 0000000 |
Relay Socket | 0000000 | Each | 00000 |
Mount these monitors to 35 mm DIN rail. They protect electric motors from phase loss, phase reversal, overvoltage, undervoltage, and voltage imbalance. Also known as voltage-monitoring relays, they cut power to a motor when a fault occurs.
For technical drawings and 3-D models, click on a part number.
Switching | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Input Voltage Range | No. of Terminals | Control Power, W | Voltage Imbalance Adjustment | Trip Time, sec. | Reset Type | Current, A | Voltage | Horsepower @ Voltage | Ht. | Wd. | Specifications Met | Each | |
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT | |||||||||||||
Three Phase | |||||||||||||
200-480V AC | 9 | 5 | 2%-10% | 1-30 | Automatic | 10 | 240V AC | 1/3 hp @ 240 V AC | 3" | 2" | UL Listed, C-UL Listed | 0000000 | 0000000 |