Spade-Terminal Relays
Using a low-current signal, these relays are often used to control small motors and heaters. These relays attach to quick-disconnect terminals.
Surface-mount relays have a slot on the flange for mounting them to flat surfaces. Relay-socket mount relays plug into a socket (sold separately).
Relay sockets mount directly on 35 mm DIN rail (also known as DIN 3 rail) for fast installation. Relay sockets with screw terminals can also mount to a flat surface.
For technical drawings and 3-D models, click on a part number.
Relays | Relay Sockets with Screw Terminals | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Terminals | Input Voltage | Control Current, mA | Switching Current @ Voltage | Maximum Switching Voltage | Ht. | Wd. | Dp. | Quick-Disconnect Tab Wd. | Each | Each | ||
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT | ||||||||||||
Relay-Socket Mount | ||||||||||||
8 | 24V AC | 50 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.187" | 00000000 | 000000 | 0000000 | 00000 |
8 | 120V AC | 10 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 0000 |
8 | 240V AC | 5 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 0000 |
8 | 12V DC | 75 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 0000 |
8 | 24V DC | 38 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 0000 |
3 Circuits Controlled with 3 Off (Normally Open) or 3 On (Normally Closed)—3PDT | ||||||||||||
Relay-Socket Mount | ||||||||||||
11 | 24V AC | 63 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.2" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 |
11 | 120V AC | 13 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.2" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 |
11 | 240V AC | 6 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.2" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 |
11 | 12V DC | 117 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.2" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 |
11 | 24V DC | 58 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.2" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 |
4 Circuits Controlled with 4 Off (Normally Open) or 4 On (Normally Closed)—4PDT | ||||||||||||
Relay-Socket Mount | ||||||||||||
14 | 24V AC | 63 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.6" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 |
14 | 120V AC | 13 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.6" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 |
14 | 240V AC | 6 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.6" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 |
14 | 12V DC | 125 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.6" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 |
14 | 24V DC | 6 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.6" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 |
Hazardous Location Relays
Sealed for safety, these relays are a good choice for hazardous locations where combustible or corrosive gases may be present.
Relays with circular-pin terminals plug into relay sockets (sold separately) for easy installation. They are hermetically sealed.
Relay sockets mount to 35 mm DIN rail (also known as DIN 3 rail) or flat surfaces.
Relays | Relay Sockets | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Terminals | Input Voltage | Control Current, mA | Switching Current @ Voltage | Max. Switching Voltage | hp @ Switching Voltage | Ht. | Wd. | Dp. | Environmental Rating | Each | Each | ||
Circular-Pin Terminals | |||||||||||||
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT | |||||||||||||
8 | 120V AC | 10 | 12 A @ 120 V AC/24 V DC | 300V AC | 1/3 hp @ 120 V AC | 1.6" | 1.4" | 2.1" | NEC Class I Division 2 Groups A, B, C, D | 0000000 | 0000000 | 0000000 | 00000 |
8 | 24V DC | 38 | 12 A @ 120 V AC/24 V DC | 300V AC | 1/3 hp @ 120 V AC | 1.6" | 1.4" | 2.1" | NEC Class I Division 2 Groups A, B, C, D | 0000000 | 000000 | 0000000 | 0000 |
Network-Enabled Relays
With a built-in web server, these relays can be remotely controlled over any IP network, including the Internet. They connect to your network either wirelessly or with an Ethernet cable (not included). No programming or software is required to operate these relays. Instead, use your web browser to input the relay’s IP address and the website guides you through simple menus and drop-down lists to set your parameters. Alternatively, you can use these relays with a PLC or without a computer at all if you use one relay as a controller for another relay.
Each circuit has a digital input that can be used to control the relay or a remote relay over the IP network. You could also use the digital input to monitor a separate device, such as a push-button or door alarm switch. These relays can be set to automatically restart network devices, such as computers, even when they fail to respond to relay signals. LED indicators let you know if there’s input and output voltage and if the network is connected and active. All meet at least one safety standard.
Mount these relays on 35 mm DIN rail (also known as DIN 3 rail) for fast installation. They also mount to flat surfaces.
Power over Ethernet (PoE) compatible relays can receive power from PoE cables (not included).
For technical drawings and 3-D models, click on a part number.
Digital Inputs | Digital Outputs | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Terminals | Voltage | No. of | Voltage | No. of | Control Current, A | Switching Current @ Voltage | Max. Switching Voltage | Ht. | Wd. | Dp. | Connection Type | Power Over Ethernet Standard | Communication Protocol | Operating System Compatibility | Features | Each | |
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT | |||||||||||||||||
8 | 6V DC, 9V DC, 12V DC, 24V DC | 1 | 5V DC | 1 | 12 | 12 A @ 30 V DC | 30V DC | 3.9" | 1.4" | 3.1" | Ethernet | __ | Modbus TCP/IP | Android 6.0 or Later, iOS 9 or Later, Windows XP or Later | LED Indicators | 0000000 | 0000000 |
8 | 6V DC, 9V DC, 12V DC, 24V DC | 1 | 5V DC | 1 | 12 | 12 A @ 30 V DC | 30V DC | 3.9" | 1.4" | 3.1" | Ethernet | PoE, Type 1 | Modbus TCP/IP | Android 6.0 or Later, iOS 9 or Later, Windows XP or Later | LED Indicators | 0000000 | 000000 |
Relay Sockets
Mount to 35 mm DIN rail (also known as DIN 3 rail) or flat surfaces, then plug your relay into these sockets for fast installation.
Recessed terminals prevent contact with live connections.
Hold-down clips (sold separately) secure the socket in applications subject to vibration.