For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.

Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F.

Stop leaks in metal tanks and equipment without draining the contents.

Stop leaks in metal tanks and equipment without draining the contents. Until a permanent repair can be made, rub these sticks into the leak to form a temporary seal.

Seal leaks around small holes.

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Make castings and fill voids with these two-part pourable epoxies.

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Everything you need to repair cracked, worn, and damaged surfaces—even underwater.

Able to withstand temperatures up to 2300° F, these ceramic surface fillers are often used as thermal insulation on brick, mortar, burner blocks, furnace holders, and thermocouples.

Fill cracks up to 10" deep on vertical and overhead surfaces.

Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.

Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.

For use when thickness will be more than 2", concrete mixes consist of cement, sand, and gravel.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

These crack fillers come in an easy-to-pour jug for filling cracks in asphalt up to 1/2” wide.

Make flexible, waterproof repairs to rips and tears in canvas, leather, and acrylic fabric.

Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls.

Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.

Repair worn and torn rubber parts. These two-part fillers are self leveling and form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Fix damaged wood or build up and replace missing wood.

Keep drywall compound close at hand so you can apply it over seams quickly and efficiently.

These knives have a sturdy blade for scraping paint and debris and for applying and smoothing joint and spackling compounds.

Use these mashers to mix drywall compound in large containers.

Smooth joint compound on both sides of an interior corner with these trowels.

Slide these tools along the perimeter of poured concrete slabs to create a rounded edge for a finished appearance that resists chipping.

Also known as mortar hoes, the blade on these tools has holes to allow concrete to pass through as you mix.

Once concrete begins to set up and surface water reabsorbs, finish with a trowel to compact the top layer for a smooth, hard surface.

Push and pull freshly-poured concrete.

Create grooves in poured concrete slabs to control cracking caused by drying, settling, and freezing.

Spread and level asphalt.

Spread, scrape, and shape mortar.

Also known as Plaster of Paris, these fillers conceal small cracks, nail holes, and blemishes. Mix with water.

Fill and conceal small cracks, nail holes, and blemishes. Compounds are ready to use.

Tape hides seams and smooths out corners. Joint compound is required for bonding and finishing.

Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.

Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.

Roll the seams where wall coverings meet for an even, continuous appearance.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Repair rips, split seams, and detached soles to stop leaks in shoes, boots, and waders.

Even when used under water, these adhesives maintain their strength.

These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

Often used on diesel engines, exhaust systems, and gas turbines, these adhesives withstand high temperatures and provide excellent electrical insulation.

Fill gaps up to 0.02" to secure worn unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies.