Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

Patch concrete floors, stairs, and walls with these compounds.

Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Make castings and fill voids with these two-part pourable epoxies.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

Press these putty-like fillers into cracks in wood up to 1/8" wide.

For quick repairs, these epoxies begin to harden in 6 minutes or less.

Assortments include eight different epoxies in 0.1-oz. packets to handle a variety of small jobs.

Even when used under water, these adhesives maintain their strength.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

These self-extinguishing epoxies meet UL 94 V-0 for flame retardance.

Permanently set threaded rods, studs, and rebar in concrete.

When concrete is saturated or submerged in water, use these adhesives to form strong bonds.