Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

Seal leaks around small holes.

Repair stripped threads on female connections, such as oil pans, valve covers, and distributor caps.

Everything you need to repair cracked, worn, and damaged surfaces—even underwater.

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Able to withstand temperatures up to 2300° F, these ceramic surface fillers are often used as thermal insulation on brick, mortar, burner blocks, furnace holders, and thermocouples.

Also known as sloshing compounds, these surface fillers bond to rough, rusty surfaces in fuel tanks to repair leaks and prevent further corrosion.

Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.

Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.

Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.

For use when thickness will be less than 2", sand mixes consist of cement and sand.

Cut rope to the length you need, pack it in cracks up to 1" wide, and heat with a propane torch.

Fill and conceal small cracks, nail holes, and blemishes. Compounds are ready to use.

Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.

Also known as drywall mud, these joint compounds are ready to use. Apply with drywall tape over seams for a finished appearance.

Tape hides seams and smooths out corners. It has an adhesive back for bonding and requires joint compound for finishing. It can also be used to repair damaged walls.

Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.

Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.

Reinforce hot- and cold-applied asphalt patching compounds and coatings with this flexible fabric.

Press these putty-like fillers into cracks in wood up to 1/8" wide.

Repair worn and torn rubber parts. These two-part fillers are self leveling and form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps.

Spray these surface fillers on molded plastic parts that have surface blemishes, scratches, and mold lines. Use with ABS, polystyrene, and glass-filled nylon.

Remove hardened flecks of mortar, dirt, and other debris.

Smooth and spread grout between tiles.

Mend rips, tears, and holes on vinyl surfaces, such as awnings and upholstery, with these flexible, waterproof surface fillers.

These long, thin brushes have semi-soft bristles to smooth out wrinkles and air bubbles after wall coverings are applied without damaging the wall covering itself.

A thin, flexible blade makes easy work of smoothing and feathering drywall compound.

Also known as mud pans, use these to mix small amounts of drywall compound or to bring it to your work area.

Cut perfect circles up to 16" in diameter to create openings for pipes, conduit, or lighting fixtures.

Thicker than taping knives, trowels can apply and spread large amounts of drywall compound quickly.

With a durable one-piece construction, these boxes have no seams or welds to crack and leak.

Use floats after edging and grooving to smooth the surface and allow trapped air and water to escape.

Drag these brooms along hardening concrete to create a rough surface for traction in slippery environments.

Improve the strength of your concrete mix by eliminating trapped air.

Make removing form-board stakes easier.