Install these cartridges in your air-purifying respirator to trap harmful gasses and vapors. To prevent leaks, choose a cartridge that matches the manufacturer and series of your respirator. Replace them when breathing becomes difficult.

P100 cartridges resist oil exposure for up to 40 hours and filter out 99.97% of solid particles.

Shield your full face and lungs from harmful vapors or particles. When you inhale, air is pulled through a cartridge or filter that removes contaminants. Replace cartridges and filters when breathing becomes difficult.

To achieve the listed filter rating, you’ll need a respirator that creates a tight seal with your face—any gaps may let in contaminants. Choose a respirator that matches the style you have been fitted for.

P100 respirators resist oil exposure for up to 40 hours and filter out 99.97% of solid particles.

Respirators with a speech diaphragm project your voice clearly, so you don’t need to take off your mask to talk.

Add an eyeglass kit to mount prescription lenses inside your respirator mask. They help you see clearly without breaking the seal around your face.

Divert compressed air from a single line to two respirators. Often used in plants with limited air sources, these manifolds allow two workers to share the same line. Shaped like a briefcase, they’re easy to tote around your facility—use them up to 300 ft. from an air source. The case is polypropylene, so it’s durable enough to hold up to wear and tear.

Made of chemical-resistant Tychem 2000 (formerly known as Tyvek QC), these hood respirators have both an outer bib and an inner bib that tucks into your clothing for splash protection. They hook up to your plant's air lines—because you don’t need to draw air through a filter or cartridge, resistance and fatigue are minimized. Respirators have a ratchet suspension that adjusts with an easy-turn knob.

These respirators do not require fit testing. The hood has a loose, comfortable fit that leaves room for a ponytail or beard. When the hood becomes worn, swap it with a replacement hood (sold separately). If you need a different material or style, select a respirator hood that’s compatible with your respirator.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Use a cooling tube or a heating/cooling tube (sold separately) to maintain a comfortable temperature inside these respirators. Turn a knob to control the amount of warm air flowing in from your air supply.

Good for use around abrasive blasters and painters, these respirators are made of high-density materials that protect against rough airborne particles. The inner lens meets ANSI/ISEA standards for impact resistance. These respirators have a pinlock suspension that adjusts with interlocking straps.

Add extension hose (sold separately) to work up to 300 ft. from an air supply. To maintain NIOSH approval, respirators must be used with the hoses listed.

Use a cooling tube or a heating/cooling tube (sold separately) to maintain a comfortable temperature inside these respirators. Turn a knob to control the amount of warm air flowing in from your air supply.

The portable pump on these respirators provides a continuous supply of clean air for one person.

Add an extension hose to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Add an eyeglass kit to mount prescription lenses inside your respirator mask. They help you see clearly without breaking the seal around your face.

Good for use around abrasive blasters and paint sprayers, these respirators are made of high-density materials that protect against rough airborne particles. An air pump (sold separately) is required. The inner lens meets ANSI/ISEA standards for impact resistance. Respirators have a pinlock suspension that adjusts with interlocking straps.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

When connected to an air pump, respirators provide a continuous supply of clean air. They have a chemical-resistant Tychem 2000 (formerly known as Tyvek QC) hood that protects against light liquid splashes. Tuck the hood with outer bib and inner bib into your clothing for splash protection. The ratchet suspension hat adjusts with an easy-turn knob.

If you need a different material or style, select a respirator hood that’s compatible with your respirator. Respirator hoods do not require fit testing, and they leave enough room to fit a ponytail or beard without compromising your respiratory protection. Hoods are available in a variety of materials and protection factors.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.