Filter by
Material
System of Measurement
Backing Type
Texture
Clarity
Hardness
Fabrication
Comparable To
Environment
Flexibility
Hardness Rating
Color
Impact Strength Rating
Water Absorption Rating
Relative Friction Rating
Tensile Strength Rating
RoHS
Export Control Classification Number (ECCN)
DFARS Specialty Metals
REACH
About Plastic
More
Electrical-Insulating Polystyrene Rods
- Color: Semi-Clear Off-White
- Temperature Range: -75° to 212° F
- Tensile Strength: 9,000 psi (Good)
- Impact Strength: 0.3 ft.-lbs./in. (Poor)
- Hardness: Rockwell R130 (Hard)
- For Use Outdoors: No
- Specifications Met: FDA Compliant 21 CFR 177.2710, Fed. Spec. L-P-516
These rods are made of a material known as Rexolite. They are electrically insulating and often used for cable connectors, electrical housings, and in microwave applications.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Dielectric Strength | Lengths, ft. | Per Ft. | |
| 1/8" | -0.002" to 0.002" | 500 V/mil | 0000000 | 00000 | |
| 1/4" | -0.002" to 0.002" | 500 V/mil | 0000000 | 0000 | |
| 3/8" | -0.002" to 0.002" | 500 V/mil | 0000000 | 0000 | |
| 1/2" | -0.002" to 0.002" | 500 V/mil | 0000000 | 0000 | |
| 3/4" | -0.002" to 0.002" | 500 V/mil | 0000000 | 00000 | |
| 1" | -0.002" to 0.002" | 500 V/mil | 0000000 | 00000 |
Electrical-Insulating Polystyrene Sheets
- Color: Semi-Clear Off-White
- Temperature Range: -75° to 212° F
- Tensile Strength: 9,000 psi (Good)
- Impact Strength: 0.3 ft.-lbs./in. (Poor)
- Hardness: Rockwell R130 (Hard)
- For Use Outdoors: No
- Specifications Met: FDA Compliant 21 CFR 177.2710, Fed. Spec. L-P-516
Known for its electrical insulating properties, these sheets are often used for cable connectors, electrical housings, and in microwave applications. This material is also called Rexolite.
For technical drawings and 3-D models, click on a part number.
Multipurpose Plastic Selector Packs
You'll get one piece of each material listed, except nylon where you'll get two pieces (one piece of nylon 6/6 and one piece of cast nylon).
For technical drawings and 3-D models, click on a part number.
| Material | Wd. | Lg. | Pkg. Qty. | Pkg. | |
| ABS Plastic, Delrin® Acetal Plastic, HDPE Plastic, LDPE Plastic, Noryl PPO Plastic, Nylon Plastic, Polyester Plastic, Polystyrene Plastic, Rexolite Polystyrene Plastic, UHMW Plastic | 2" | 2" | 11 | 0000000 | 000000 |