Steel Lifting Beams
Keep long and unbalanced loads stable where overhead space is limited. Unlike spreader beams, which require a chain sling to operate, these beams use a single attachment point to hook onto your crane, hoist, or other lifting device. However, using one attachment point instead of two can cause uneven weight distribution and place more stress on the beam. Capacity is marked on the beam.
Beams with shackles have lifting eyes and shackles that adjust with screw pins.
Beams with brackets give you more control over where your attachment points are than beams with shackles. Adjust them in 2" increments. For even more stability, add upper and lower brackets (sold separately) to create additional lifting points. You can also use them to replace worn or damaged brackets. Upper brackets are for vertical lifting only. Do not use two upper brackets with a 2-leg chain sling.
Beams with brackets and hand chain let you shift the lifting eye to stabilize loads without taking the beam apart to reposition the upper bail. Lower the load to relieve tension, then pull the hand chain to shift the lifting eye up to 13 1/2" inches to the left or right.
Beams with latching hooks screw through openings in the bottom of the beam at specific points to adjust the spread. The hooks swivel for easy positioning before a load is applied.
Warning: Never use to lift people or items over people.

Lifting Eye | Overall | Fitting Eye | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Spread | Lg. | Wd. | Lg. | Ht. | Lg. | Wd. | Center-to-Center Adjustments | Specifications Met | Each | |
Yellow Painted Steel | |||||||||||
250 | 18"-36" | 1 3/16" | 1 1/8" | 37" | 5 3/4" | 7/8" | 3/4" | 3" | ASME B30.20 | 00000000 | 0000000 |
500 | 22"-46" | 1 5/8" | 1 1/4" | 48" | 6 13/16" | 1 3/16" | 1 1/8" | 4" | ASME B30.20 | 00000000 | 000000 |
1,000 | 12"-48" | 1 11/16" | 1 1/8" | 49 3/4" | 7" | 1 11/16" | 1 1/8" | 6" | ASME B30.20 | 000000000 | 000000 |
1,000 | 36"-72" | 1 5/8" | 1 1/4" | 74" | 7 13/16" | 1 3/16" | 1 1/8" | 6" | ASME B30.20 | 00000000 | 000000 |
1,000 | 48"-96" | 1 11/16" | 1 1/8" | 97 3/4" | 10" | 1 11/16" | 1 5/32" | 6" | ASME B30.20 | 000000000 | 00000000 |
1,000 | 60"-120" | 1 11/16" | 1 1/8" | 122" | 10" | 1 11/16" | 1 1/8" | 6" | ASME B30.20 | 000000000 | 00000000 |
2,000 | 36"-72" | 2 1/2" | 1 5/8" | 74" | 9 1/4" | 1 3/4" | 1 1/8" | 6" | ASME B30.20 | 00000000 | 00000000 |
2,000 | 48"-96" | 1 11/16" | 1 1/8" | 98" | 11" | 1 11/16" | 1 1/8" | 6" | ASME B30.20 | 000000000 | 00000000 |
2,000 | 60"-120" | 1 11/16" | 1 1/8" | 122" | 11" | 1 11/16" | 1 1/8" | 6" | ASME B30.20 | 000000000 | 00000000 |
4,000 | 36"-72" | 2 3/8" | 1 11/16" | 74" | 12 1/2" | 1 7/8" | 1 1/4" | 6" | ASME B30.20 | 000000000 | 00000000 |
4,000 | 48"-96" | 2 3/8" | 1 11/16" | 98" | 13 1/2" | 1 7/8" | 1 1/4" | 6" | ASME B30.20 | 000000000 | 00000000 |
4,000 | 60"-120" | 2 3/8" | 1 11/16" | 122" | 14 1/2" | 1 7/8" | 1 1/4" | 6" | ASME B30.20 | 000000000 | 00000000 |
8,000 | 48"-96" | 2 13/16" | 2" | 99" | 16 1/2" | 2 13/16" | 2" | 6" | ASME B30.20 | 000000000 | 00000000 |
8,000 | 60"-120" | 2 13/16" | 2" | 123" | 18 1/2" | 2 13/16" | 2" | 6" | ASME B30.20 | 000000000 | 00000000 |
10,000 | 60"-120" | 3 5/16" | 2 1/4" | 123" | 20" | 2 13/16" | 2" | 6" | ASME B30.20 | 000000000 | 00000000 |


Beams | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lifting Eye | Overall | Fitting Eye | Upper Brackets | Lower Brackets | |||||||||||
Capacity, lbs. | Spread | Lg. | Wd. | Lg. | Ht. | Lg. | Wd. | Center-to-Center Adjustments | Specifications Met | Each | Each | Each | |||
Yellow Painted Steel | |||||||||||||||
1,500 | 12"-60" | 5 1/4" | 2 1/2" | 66 1/4" | 11 1/4" | 3" | 1 1/2" | 2" | ASME B30.20 | 0000000 | 0000000 | 00000000 | 0000000 | 00000000 | 000000 |
2,500 | 12"-72" | 4 3/4" | 2 1/2" | 78 1/4" | 12" | 3" | 1 1/2" | 2" | ASME B30.20 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 |
4,000 | 12"-72" | 5 3/4" | 3" | 79 1/4" | 15" | 4" | 2" | 2" | ASME B30.20 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 |
8,000 | 16"-96" | 7 3/4" | 4" | 105" | 22" | 6" | 3" | 2" | ASME B30.20 | 0000000 | 00000000 | 00000000 | 000000 | 00000000 | 000000 |
10,000 | 16"-120" | 9 3/4" | 5" | 129" | 26" | 6" | 3" | 2" | ASME B30.20 | 0000000 | 00000000 | 00000000 | 000000 | 00000000 | 000000 |
12,000 | 20"-144" | 10" | 6" | 155 1/4" | 30" | 8" | 4" | 2" | ASME B30.20 | 0000000 | 00000000 | 00000000 | 000000 | 00000000 | 000000 |

Lifting Eye | Overall | Hook | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Spread | Lg. | Wd. | Lg. | Ht. | Opening Wd. | Usable Lg. | Center-to-Center Adjustments | Specifications Met | Each | |
Yellow Painted Steel | |||||||||||
1,000 | 24"-36" | 5" | 3" | 39" | 12 3/4" | 7/8" | 5 5/8" | 12" | ASME B30.20 | 00000000 | 000000000 |
1,000 | 36"-48" | 5" | 3" | 51" | 12 3/4" | 7/8" | 5 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
1,000 | 48"-72" | 5" | 3" | 75" | 12 3/4" | 7/8" | 5 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
1,000 | 72"-96" | 5" | 3" | 99" | 12 3/4" | 7/8" | 5 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
1,000 | 96"-120" | 5" | 3" | 123" | 13 3/4" | 7/8" | 5 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
2,000 | 24"-36" | 5" | 3" | 39" | 12 3/4" | 7/8" | 5 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
2,000 | 36"-48" | 5" | 3" | 51" | 12 3/4" | 7/8" | 1 5/8" | 6" | ASME B30.20 | 0000000 | 00000000 |
2,000 | 48"-72" | 5" | 3" | 75" | 13 3/4" | 7/8" | 1 5/8" | 6" | ASME B30.20 | 0000000 | 00000000 |
2,000 | 72"-96" | 5" | 3" | 99" | 13 3/4" | 7/8" | 5 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
2,000 | 96"-120" | 5" | 3" | 123" | 14 3/4" | 7/8" | 5 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
4,000 | 24"-36" | 5" | 3" | 39" | 13 3/4" | 7/8" | 5 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
4,000 | 36"-48" | 5" | 3" | 51" | 13 3/4" | 7/8" | 1 5/8" | 6" | ASME B30.20 | 0000000 | 00000000 |
4,000 | 48"-72" | 5" | 3" | 75" | 14 3/4" | 7/8" | 1 5/8" | 6" | ASME B30.20 | 0000000 | 00000000 |
4,000 | 72"-96" | 5" | 3" | 99" | 16 1/2" | 1" | 6 1/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
4,000 | 96"-120" | 5" | 3" | 123" | 17 1/2" | 1" | 6 1/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
6,000 | 24"-36" | 5" | 3" | 39" | 15 1/4" | 1" | 6 1/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
6,000 | 36"-48" | 5" | 3" | 51" | 15 1/4" | 1" | 6 1/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
6,000 | 48"-72" | 5" | 3" | 75" | 16 1/4" | 1" | 6 1/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
6,000 | 72"-96" | 5" | 3" | 99" | 17 1/4" | 1" | 6 1/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
6,000 | 96"-120" | 5" | 3" | 123" | 18 1/4" | 1" | 6 1/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
10,000 | 24"-36" | 7" | 4" | 40" | 18 7/16" | 1 15/16" | 7 1/2" | 12" | ASME B30.20 | 00000000 | 00000000 |
10,000 | 36"-48" | 7" | 4" | 52" | 19 7/16" | 1 15/16" | 7 1/2" | 12" | ASME B30.20 | 00000000 | 00000000 |
10,000 | 48"-72" | 7" | 4" | 76" | 20 7/16" | 1 15/16" | 7 1/2" | 12" | ASME B30.20 | 00000000 | 00000000 |
10,000 | 72"-96" | 7" | 4" | 100" | 23 7/16" | 1 1/2" | 9 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
10,000 | 96"-120" | 7" | 4" | 124" | 25 3/8" | 1 1/2" | 9 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
15,000 | 24"-36" | 7" | 4" | 40" | 21 5/8" | 1 1/2" | 9 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
15,000 | 36"-48" | 7" | 4" | 52" | 22 7/16" | 1 1/2" | 9 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
15,000 | 72"-96" | 7" | 4" | 100" | 25 3/8" | 1 1/2" | 9 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
15,000 | 96"-120" | 7" | 4" | 124" | 27 1/4" | 1 1/2" | 9 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
20,000 | 24"-36" | 7" | 4" | 40" | 22 1/8" | 1 1/2" | 9 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
20,000 | 72"-96" | 7" | 4" | 100" | 27 1/8" | 1 1/2" | 9 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
20,000 | 96"-120" | 7" | 4" | 124" | 27" | 1 1/2" | 9 5/8" | 12" | ASME B30.20 | 00000000 | 00000000 |
Fiberglass Lifting Beams
These lightweight beams are made of fiberglass so they are nonconductive and will not corrode. Capacity is marked on the beam.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.

Lifting Eye | Overall | Hook | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Spread | Lg. | Wd. | Lg. | Ht. | Opening Wd. | Usable Lg. | Center-to-Center Adjustments | Material | Color | Specifications Met | Each | |
With Latching Hooks | |||||||||||||
1,000 | 36"-48" | 1 7/8" | 1 1/2" | 49 1/2" | 14 7/8" | 7/8" | 4 1/2" | 3" | Painted Fiberglass | Green | ASME B30.20 | 00000000 | 000000000 |
1,000 | 48"-72" | 1 7/8" | 1 1/2" | 73 1/2" | 16 7/8" | 7/8" | 4 1/2" | 6" | Painted Fiberglass | Green | ASME B30.20 | 00000000 | 00000000 |
2,000 | 36"-48" | 4 1/2" | 2 3/4" | 50 3/8" | 21 5/8" | 7/8" | 5 3/8" | 3" | Painted Fiberglass | Green | ASME B30.20 | 00000000 | 00000000 |

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors.
Galvanized steel shackles have a thick coating for corrosion resistance.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.
For Fiberglass Lifting Beams Part Number | Capacity, lbs. | Thick. | Pin Dia. | Opening Wd. | Inside Lg. | Inside Wd. | Specifications Met | Safety Factor | Each | |
Galvanized Steel | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
1772N111, 1772N113, 1772N114 | 4,400 | 1/2" | 21/32" | 13/16" | 1 29/32" | 1 5/16" | ASME B30.26, Fed. Spec. RR-C-271F | 6:1 | 0000000 | 000000 |
Basket Sling Lifting Beams


Hook slings to these beams to cradle your load for steady lifting. They work together to distribute the weight across multiple lifting points. They’re especially useful for lifting bundles of pipe, rods, and other materials that might shift as you lift. You can adjust where the hooks are on the beam based on your load’s center of gravity, so even lopsided objects stay balanced.
Choose a web sling that is long enough to fit around your object and strong enough to support the load.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Lifting Eye | Overall | Hook | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Spread | For Max. Sling Wd. | Lg. | Wd. | Lg. | Ht. | Opening Wd. | Dia. | Center-to-Center Adjustments | Material | Color | Specifications Met | Each | |
With J-Hooks | ||||||||||||||
4,000 | 16"-72" | 4" | 5 1/4" | 3" | 78" | 18 3/4" | 4 5/16" | 1" | 4" | Powder-Coated Steel | Blue | ASME B30.20 | 0000000 | 000000000 |
Magnetic Lifting Beams

No need for slings or chains—magnets on either side of these beams grip heavy, magnetic items, such as steel sheets and I-beams. They evenly distribute the load across multiple lifting points to maintain balance and stability. Adjust the placement of the magnets using the holes on each end of these beams. An on/off handle engages and releases the magnets.
The listed capacities are based on lifting metal that has a clean, smooth surface. Capacities will be reduced if used on dirty or oily surfaces. Do not use on metal that flexes.
Warning: Never use these to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Lifting Eye | Overall | Magnet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap. @ Material Thick. | Cap. @ Dia. | Spread | Lg. | Wd. | Lg. | Ht. | Lg. | Wd. | No. of Magnets | No. of Positions | Center-to-Center Adjustments | Material | Color | Specifications Met | Each | |
520 lbs. @ 1/8" 920 lbs. @ 1/4" 1,000 lbs. @ 3/8" | 400 lbs. @ 3/8" | 33"-45" | 5" | 3" | 53 3/4" | 22 7/16" | 8" | 3 5/8" | 2 | 2 | 6" | Powder-Coated Steel | Blue | ASME B30.20 | 00000000 | 000000000 |
520 lbs. @ 1/8" 920 lbs. @ 1/4" 1,000 lbs. @ 3/8" | 400 lbs. @ 3/8" | 45"-69" | 5" | 3" | 77 3/4" | 22 7/16" | 8" | 3 5/8" | 2 | 3 | 6" | Powder-Coated Steel | Blue | ASME B30.20 | 00000000 | 00000000 |
1,000 lbs. @ 1/4" 1,500 lbs. @ 3/8" 2,000 lbs. @ 5/8" 2,000 lbs. @ 1" | 800 lbs. @ 1" | 33"-45" | 5" | 3" | 56" | 23 7/8" | 10 3/4" | 5 1/2" | 2 | 2 | 6" | Powder-Coated Steel | Blue | ASME B30.20 | 00000000 | 00000000 |
1,000 lbs. @ 1/4" 1,500 lbs. @ 3/8" 2,000 lbs. @ 5/8" 2,000 lbs. @ 1" | 800 lbs. @ 1" | 45"-69" | 5" | 3" | 80" | 23 7/8" | 10 3/4" | 5 1/2" | 2 | 3 | 6" | Powder-Coated Steel | Blue | ASME B30.20 | 00000000 | 00000000 |
Spreader Beams
With two lifting points on top instead of one, these beams keep wide and heavy loads more stable than lifting beams. This distributes weight to reduce stress on the beam. However, these beams require more headroom than lifting beams because they attach to a chain sling.
Expand or collapse the beam to fit your load. Hooks at the bottom of the beam swivel for easy positioning before lifting.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.


Beams | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lifting Eye | Overall | Hook | Replacement Eye Hooks | Replacement Chain Slings | |||||||||||||
Capacity, lbs. | Spread | Lg. | Wd. | Lg. | Ht. | Opening Wd. | Usable Lg. | Straight-Link Chain Trade Size | Chain Lg. | Center-to-Center Adjustments | Specifications Met | Each | Each | Each | |||
Yellow Powder-Coated Steel | |||||||||||||||||
4,000 | 72"-120" | 4 5/16" | 2 5/16" | 75"-123" | 75" | 7/8" | 4 7/8" | 9/32 | 88 3/8" | 1" | ASME B30.20 | 00000000 | 000000000 | 00000000 | 0000000 | 00000000 | 0000000 |
4,000 | 144"-240" | 4 5/16" | 2 5/16" | 147"-243" | 132" | 7/8" | 4 7/8" | 9/32 | 172 1/2" | 1" | ASME B30.20 | 00000000 | 00000000 | 00000000 | 000000 | 00000000 | 000000 |
10,000 | 72"-120" | 6 5/16" | 3 1/2" | 76"-124" | 77" | 1 1/16" | 5 3/4" | 3/8 | 89 3/8" | 1" | ASME B30.20 | 00000000 | 00000000 | 00000000 | 000000 | 00000000 | 000000 |
20,000 | 72"-120" | 7 13/16" | 4 5/16" | 77"-125" | 84" | 1 5/16" | 6 5/8" | 5/8 | 92 3/8" | 1" | ASME B30.20 | 00000000 | 00000000 | 00000000 | 000000 | 00000000 | 00000000 |
Industrial Battery Lifters

Lift forklift batteries and other large, heavy batteries. The beams are lightweight, nonconductive, and have acid-resistant straps.
Warning: Never use to lift people or items over people.
Fork-Mount Roll-Lifting Poles

Safely transport rolled and coiled items with a forklift. Also known as carpet rams, these poles have pockets that slide over forks and a hook and chain that secures to your forklift’s carriage. The tip is yellow for visibility. For easy storage, remove the pole from the base when not in use.
Make sure the items you move don’t exceed your forklift's capacity.
Warning: Never use to lift people or items over people.
Pole | Fork Pockets | For Max. Fork | Overall | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Capacity, lbs. | No. of | Spacing Ctr.-to-Ctr. | For Min. Fork Lg. | Wd. | Ht. | Lg. | Wd. | Ht. | Forklift Attachment Type | Material | Color | Each | |
48" | 2 3/4" | 2,500 | 2 | 24" | 30" | 7 5/8" | 2 5/8" | 77 3/8" | 34" | 7 1/4" | Hook and Chain | Painted Steel | Blue | 00000000 | 0000000 |
108" | 2 3/4" | 2,500 | 2 | 24" | 30" | 7 5/8" | 2 5/8" | 137 3/8" | 34" | 7 1/4" | Hook and Chain | Painted Steel | Blue | 00000000 | 00000000 |