System of Measurement System of Measurement |
|---|
|
Pin Material Pin Material |
|---|
|
For Use In For Use In | Show |
|---|
|
For Use In For Use In | Hide |
|---|
|
|
Minimum Installation Depth Minimum Installation Depth |
|---|
|
|
|
Drill Bit Decimal Size Equivalent Drill Bit DecimalSize Equivalent |
|---|
|
|
Pull-Out Strength Pull-Out Strength |
|---|
|
|
Shear Strength Shear Strength |
|---|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Finish Finish |
|---|
|
Plastic Removable Pin-Drive Anchors for Block and Brick
These anchors are also known as drive rivets. To install, hammer the pin into the body. Pry out the pin to remove.
For technical drawings and 3-D models, click on a part number.
Head | Strength, lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drill Bit Size | Min. Installation Dp. | Pin Material | Temperature Range, °F | Pull-Out | Shear | For Use In | Pkg. Qty. | Pkg. | |
Nylon 6/6 Plastic | ||||||||||||
3/16" Dia. | ||||||||||||
| 3/4" | 9/16" | 1/8" | 3/16" | 3/4" | Steel | -40° to 185° | Not Rated | Not Rated | Block, Brick, Stone | 100 | 000000000 | 000000 |
| 1" | 9/16" | 1/8" | 3/16" | 1" | Steel | -40° to 185° | Not Rated | Not Rated | Block, Brick, Stone | 100 | 000000000 | 00000 |
1/4" Dia. | ||||||||||||
| 3/4" | 9/16" | 7/64" | 1/4" | 3/4" | Acetal Plastic | -40° to 185° | Not Rated | Not Rated | Block, Brick, Stone | 100 | 000000000 | 00000 |
| 3/4" | 9/16" | 1/8" | 1/4" | 3/4" | Steel | -40° to 185° | Not Rated | Not Rated | Block, Brick, Stone | 100 | 000000000 | 00000 |
| 1" | 9/16" | 7/64" | 1/4" | 1" | Acetal Plastic | -40° to 185° | Not Rated | Not Rated | Block, Brick, Stone | 100 | 000000000 | 00000 |
| 1" | 9/16" | 1/8" | 1/4" | 1" | Steel | -40° to 185° | Not Rated | Not Rated | Block, Brick, Stone | 100 | 000000000 | 00000 |
| 1 1/2" | 9/16" | 7/64" | 1/4" | 1 1/2" | Acetal Plastic | -40° to 185° | Not Rated | Not Rated | Block, Brick, Stone | 100 | 000000000 | 00000 |
| 1 1/2" | 9/16" | 1/8" | 1/4" | 1 1/2" | Steel | -40° to 185° | Not Rated | Not Rated | Block, Brick, Stone | 100 | 000000000 | 00000 |
Zinc Alloy Removable Pin-Drive Anchors for Block and Brick
Also known as drive rivets, install these anchors by hammering the pin into the body. Pry out the pin to remove.
For technical drawings and 3-D models, click on a part number.
Head | Strength, lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drill Bit Size | Min. Installation Dp. | Pin Material | Pull-Out | Shear | Specifications Met | For Use In | Pkg. Qty. | Pkg. | |
Zinc Alloy | ||||||||||||
3/16" Dia. | ||||||||||||
| 7/8" | 7/16" | 7/64" | 3/16" | 1/8" | Steel | Not Rated | Not Rated | FM Approved | Block, Brick | 100 | 000000000 | 000000 |
1/4" Dia. | ||||||||||||
| 3/4" | 9/16" | 9/64" | 1/4" | 1/8" | Steel | Not Rated | Not Rated | FM Approved | Block, Brick | 50 | 000000000 | 00000 |
| 1" | 9/16" | 9/64" | 1/4" | 3/8" | 18-8 Stainless Steel | Not Rated | Not Rated | FM Approved | Block, Brick | 25 | 000000000 | 00000 |
| 1" | 9/16" | 9/64" | 1/4" | 3/8" | Steel | Not Rated | Not Rated | FM Approved | Block, Brick | 25 | 000000000 | 00000 |
| 1 1/4" | 9/16" | 9/64" | 1/4" | 5/8" | 18-8 Stainless Steel | Not Rated | Not Rated | FM Approved | Block, Brick | 25 | 000000000 | 00000 |
| 1 1/4" | 9/16" | 9/64" | 1/4" | 5/8" | Steel | Not Rated | Not Rated | FM Approved | Block, Brick | 25 | 000000000 | 00000 |
| 1 1/2" | 9/16" | 9/64" | 1/4" | 7/8" | 18-8 Stainless Steel | Not Rated | Not Rated | FM Approved | Block, Brick | 10 | 000000000 | 0000 |
| 1 1/2" | 9/16" | 9/64" | 1/4" | 7/8" | Steel | Not Rated | Not Rated | FM Approved | Block, Brick | 25 | 000000000 | 00000 |
| 2" | 9/16" | 9/64" | 1/4" | 1 3/8" | 18-8 Stainless Steel | Not Rated | Not Rated | FM Approved | Block, Brick | 10 | 000000000 | 0000 |
| 2" | 9/16" | 9/64" | 1/4" | 1 3/8" | Steel | Not Rated | Not Rated | FM Approved | Block, Brick | 25 | 000000000 | 00000 |
| 3" | 9/16" | 9/64" | 1/4" | 1 1/4" | Steel | Not Rated | Not Rated | __ | Block, Brick | 10 | 000000000 | 0000 |
Plastic Removable Screw-Drive Anchors for Block and Brick
These anchors are also known as drive rivets. To install, hammer the screw into the body. Unthread the screw to remove.
For technical drawings and 3-D models, click on a part number.
Head | Strength, lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drill Bit Size | Min. Installation Dp. | Screw Material | Temperature Range, °F | Pull-Out | Shear | For Use In | Pkg. Qty. | Pkg. | |
Nylon 6/6 Plastic | ||||||||||||
3/16" Dia. | ||||||||||||
| 1" | 7/16" | 1/8" | 3/16" | 1" | Zinc-Plated Steel | -40° to 185° | Not Rated | Not Rated | Block, Brick, Stone | 100 | 000000000 | 000000 |
1/4" Dia. | ||||||||||||
| 1" | 7/16" | 1/8" | 1/4" | 1" | Zinc-Plated Steel | -40° to 185° | Not Rated | Not Rated | Block, Brick, Stone | 100 | 000000000 | 00000 |
| 1 1/2" | 7/16" | 1/8" | 1/4" | 1 1/2" | Zinc-Plated Steel | -40° to 185° | Not Rated | Not Rated | Block, Brick, Stone | 100 | 000000000 | 00000 |
Zinc Alloy Removable Screw-Drive Anchors for Block and Brick
Also known as drive rivets, install by hammering the screw into the body. Unthread the screw to remove.
For technical drawings and 3-D models, click on a part number.
Head | Strength, lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drill Bit Size | Min. Installation Dp. | Screw Material | Pull-Out | Shear | Specifications Met | For Use In | Pkg. Qty. | Pkg. | |
Zinc Alloy | ||||||||||||
1/4" Dia. | ||||||||||||
| 3/4" | 9/16" | 5/32" | 1/4" | 3/4" | Steel | Not Rated | Not Rated | FM Approved | Block, Brick | 50 | 000000000 | 000000 |
| 1" | 9/16" | 5/32" | 1/4" | 1" | Steel | Not Rated | Not Rated | FM Approved | Block, Brick | 50 | 000000000 | 00000 |
| 1 1/4" | 9/16" | 5/32" | 1/4" | 1 1/4" | Steel | Not Rated | Not Rated | FM Approved | Block, Brick | 25 | 000000000 | 00000 |
| 1 1/2" | 9/16" | 5/32" | 1/4" | 1 1/2" | Steel | Not Rated | Not Rated | FM Approved | Block, Brick | 25 | 000000000 | 00000 |
| 2" | 9/16" | 5/32" | 1/4" | 2" | Steel | Not Rated | Not Rated | FM Approved | Block, Brick | 25 | 000000000 | 00000 |
Heavy Duty Pin-Drive Anchors for Block and Brick
Use in applications requiring high strength. To install, hammer the pin to expand the end. When the pin is flush, the anchor is set. A trivalent zinc plating provides corrosion resistance in wet environments. Pull-out strength and shear strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Thread | Strength, lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Size | Lg. | Washer OD | Nut Wd. | Drill Bit Size | Min. Installation Dp. | Pull-Out | Shear | Tested In | For Use In | Pkg. Qty. | Pkg. | |
Trivalent Zinc Plated Steel | |||||||||||||
1/4" Dia. | |||||||||||||
| 1 3/4" | 1/4"-20 | 5/8" | 9/16" | 7/16" | 1/4" | 1 1/8" | 370 | 250 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 4 | 000000000 | 00000 |
| 2 3/8" | 1/4"-20 | 3/4" | 9/16" | 7/16" | 1/4" | 1 1/8" | 370 | 250 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 4 | 000000000 | 0000 |
5/16" Dia. | |||||||||||||
| 2" | 5/16"-18 | 3/4" | 11/16" | 5/16" | 5/16" | 1 1/2" | 770 | 320 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 4 | 000000000 | 0000 |
| 2 3/4" | 5/16"-18 | 1" | 11/16" | 5/16" | 5/16" | 1 1/2" | 770 | 320 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 4 | 000000000 | 0000 |
3/8" Dia. | |||||||||||||
| 2 3/8" | 3/8"-16 | 1" | 3/4" | 9/16" | 3/8" | 1 7/8" | 820 | 870 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 4 | 000000000 | 0000 |
| 3 1/2" | 3/8"-16 | 1 1/8" | 3/4" | 9/16" | 3/8" | 1 7/8" | 820 | 870 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 4 | 000000000 | 00000 |
| 4 3/4" | 3/8"-16 | 1 3/8" | 3/4" | 9/16" | 3/8" | 1 7/8" | 820 | 870 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 4 | 000000000 | 00000 |
1/2" Dia. | |||||||||||||
| 2 3/4" | 1/2"-13 | 1" | 15/16" | 3/4" | 1/2" | 2 1/2" | 1,400 | 1,200 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 4 | 000000000 | 00000 |
| 3 1/2" | 1/2"-13 | 1 1/8" | 15/16" | 3/4" | 1/2" | 2 1/2" | 1,400 | 1,200 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 4 | 000000000 | 00000 |
| 4 3/4" | 1/2"-13 | 1 3/8" | 15/16" | 3/4" | 1/2" | 2 1/2" | 1,400 | 1,200 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 4 | 000000000 | 00000 |
| 6" | 1/2"-13 | 1 1/2" | 15/16" | 3/4" | 1/2" | 2 1/2" | 1,400 | 1,200 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 1 | 000000000 | 0000 |
5/8" Dia. | |||||||||||||
| 4" | 5/8"-11 | 1 1/2" | 1 5/16" | 15/16" | 5/8" | 2 3/4" | 1,900 | 2,300 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 1 | 000000000 | 0000 |
| 6" | 5/8"-11 | 1 1/2" | 1 5/16" | 15/16" | 5/8" | 2 3/4" | 1,900 | 2,300 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 1 | 000000000 | 0000 |
Tamper-Resistant Pin-Drive Anchors for Block and Brick
A tamper-resistant nut prevents unwanted removal of the object you are anchoring. Turn the nut round side up for a domed look or countersink the nut flat side up for a flush surface. To install, hammer the pin to expand the end. When the pin is flush, the anchor is set. Pull-out strength and shear strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Thread Lg. | Drill Bit Size | Min. Installation Dp. | Pull-Out | Shear | Tested In | For Use In | Pkg. Qty. | Pkg. | |
Steel | ||||||||||
1/4" Dia. | ||||||||||
| 1 3/4" | 5/8" | 1/4" | 1" | 320 | 400 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 10 | 000000000 | 000000 |
| 2 3/8" | 3/4" | 1/4" | 1" | 320 | 400 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 4 | 000000000 | 00000 |
3/8" Dia. | ||||||||||
| 2 3/8" | 1" | 3/8" | 1 1/2" | 850 | 850 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 4 | 000000000 | 00000 |
| 3 1/2" | 1 1/8" | 3/8" | 1 1/2" | 850 | 850 | 4,000 psi Concrete | Block, Brick, Concrete, Stone | 5 | 000000000 | 00000 |
Plastic Drive Anchors for Concrete
Also known as tap-in or uni-tap rivets, these anchors are barbed to resist pull out. Made from nylon, they're chemical resistant. The anchor compresses when driven in, expanding inside the hole for a secure hold in concrete. Install in a hole that is slightly longer than the anchor. Pull-out strength and shear strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Head | Strength, lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drill Bit Size | Min. Installation Dp. | Color | Temperature Range, °F | Pull-Out | Shear | Tested In | For Use In | Pkg. Qty. | Pkg. | |
Nylon Plastic | |||||||||||||
9/32" Dia. | |||||||||||||
| 1" | 5/8" | 1/8" | 1/4" | 1" | White | -20° to 160° | 35 | 55 | 4,000 psi Concrete | Block, Concrete | 100 | 000000000 | 000000 |
| 1 5/8" | 5/8" | 1/8" | 1/4" | 1" | White | -20° to 160° | 35 | 55 | 4,000 psi Concrete | Block, Concrete | 50 | 000000000 | 00000 |
| 2 1/8" | 5/8" | 1/8" | 1/4" | 1" | White | -20° to 160° | 35 | 55 | 4,000 psi Concrete | Block, Concrete | 50 | 000000000 | 00000 |
| 2 5/8" | 5/8" | 1/8" | 1/4" | 1" | White | -20° to 160° | 35 | 55 | 4,000 psi Concrete | Block, Concrete | 25 | 000000000 | 00000 |
| 3 1/8" | 5/8" | 1/8" | 1/4" | 1" | White | -20° to 160° | 35 | 55 | 4,000 psi Concrete | Block, Concrete | 25 | 000000000 | 00000 |