Choose a Category
Clear All
Material Material | Show |
|---|
|
Material Material | Hide |
|---|
|
|
Head Type Head Type |
|---|
 | Flush Mount |
System of Measurement System of Measurement |
|---|
|
Rivet Type Rivet Type |
|---|
 | Blind |
Mandrel Material Mandrel Material |
|---|
|
For Hole Size For Hole Size |
|---|
|
For Drill Bit Size For Drill Bit Size |
|---|
|
For Material Thickness For Material Thickness |
|---|
|
Shear Strength Shear Strength |
|---|
|
Specifications Met Specifications Met |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
About Installing Blind Rivets
More
Nickel Flush-Mount Blind Rivets
Installed
This high-strength material is nonmagnetic and has excellent corrosion resistance. Install these rivets in countersunk holes and the angled head sits flush with the material's surface. They join material when you only have access to one side.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| Dia. | For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Countersink Angle | Shear Strength, lbs. | Tensile Strength, lbs. | Mandrel Material | Specifications Met | Pkg. Qty. | Pkg. | |
| 3/16" | 0.259"-0.367" | 0.547" | 0.192"-0.196" | No. 11 | 0.34" | 0.055" | 120° | 740 | 840 | Steel | IFI 114 Standards | 10 | 000000000 | 00000 |
The quick brown fox jumped over the lazy dog. Pedestal (35" Ht. x 4" Wd. x 4" Dp.)