The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals. They're often used for light duty fastening in low-clearance applications. The threaded portion is drawn into the sleeve when installed, creating pressure against the hole to secure the nut. The tin-plating provides lubricity allowing the nut to collapse smoothly. Drill bit size listed in the table is for material with a 0.030"-0.090" thickness. These rivet nuts can be installed in thicker material, but may require larger holes. Install them using a hand- or power-driven rivet nut tool. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.

For technical drawings and 3-D models, click on a part number.

A high-strength alternative to blind rivets, these Class 8.8 steel screws can be used when only one side of the material is accessible. To install, hold the washer in place with a wrench, and then use a hex socket to turn the screw. When the screw is tightened, the attached nut expands the sleeve to create a strong clamping force on the back of the material. Dimensions meet ISO 4017 (formerly DIN 933) specifications. Length is measured from under the head.

For technical drawings and 3-D models, click on a part number.

This tool has changeable nosepieces, anvils, and pull-up studs for installing rivets and rivet nuts. A self-contained hydraulic system delivers additional force to make installation easier. Choose the attachment that matches your rivet's diameter or nut thread size. To install a rivet, insert the mandrel into the nosepiece of the tool. Place the rivet in the material and squeeze the handles. The tool pulls the mandrel through the rivet's body, creating a secure hold on both sides of the material, and breaks off the excess mandrel.

Pull-up studs and driving anvils for 6-32 to 3/8"-16 and M3 to M10 rivet nuts are sold separately.

Turn these tools by hand to install low-profile rivet nuts. The required mandrels are sold separately. To use, thread the nut onto a mandrel of the same size, then place it into a hole, push down on the tool's T-handle, and turn clockwise.

Use two hands to maximize leverage when installing smooth body rivet nuts. These tools include a mandrel and nosepiece for 1/4"-20 size nuts (additional sizes sold separately). A mandrel and nosepiece are required for installation. To use, thread the nut onto the mandrel, insert the nut into a drilled hole, and squeeze the handles to secure the nut.

They are also compatible with rivet-type studs.

Tools with knob have a spin-to-reverse knob to quickly unthread the mandrel from the installed nut.

Tools with plunger have a quick-acting, pull-to-remove plunger that unthreads the mandrel from the installed nut.

An indicator allows you to ensure your rivet nut installs correctly. Thread the rivet nut onto the mandrel, insert the nut into a drilled hole, and squeeze the handles to secure the nut. Mandrel and nosepiece sets are required and sold separately.

Tools with knob install rivet-type studs and smooth and ribbed body rivet nuts. They have a spin-to-reverse knob to quickly unthread the mandrel from the installed nut.

Tools with plunger install smooth and ribbed body rivet nuts. They have a quick-acting, pull-to-remove plunger that unthreads the mandrel from the installed nut.

Smaller and lighter than cordless and hydraulic rivet nut tools, use these to install smooth rivet nuts. To use, thread the nut onto the included mandrel and press the trigger to spin the nut onto the tool. Place the nut into the material and press the trigger to install the nut. Press the trigger one more time to spin the mandrel off.