Material Material | Show |
|---|
|
Material Material | Hide |
|---|
|
For Maximum Material Thickness For MaximumMaterial Thickness |
|---|
|
Length Length |
|---|
For Use In For Use In |
|---|
|
For Minimum Material Thickness For MinimumMaterial Thickness |
|---|
|
Nut Type Nut Type |
|---|
 | Rivet |
Body Diameter Body Diameter |
|---|
End Type End Type |
|---|
|
Flange Diameter Flange Diameter |
|---|
Installed Length Installed Length |
|---|
|
Flange Thickness Flange Thickness |
|---|
|
|
|
Drill Bit Size Drill Bit Size |
|---|
Drill Bit Decimal Size Equivalent Drill Bit DecimalSize Equivalent |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About Nuts, Materials, and Finishes
More
Aluminum Twist-Resistant Rivet Nuts
These rivet nuts are one-third the weight of steel rivet nuts and mildly corrosion resistant. A ribbed body holds the nut in place so it won't turn when tightening a screw. Also known as blind inserts, they can be installed when you have access to only one side of the material. Install in a drilled hole using a rivet nut tool. The tool collapses the nut, creating a backside flange that holds the nut to the material. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Installed Lg. | Dia. | Thick. | Pkg. Qty. | Pkg. | |
Aluminum | |||||||||||
| 6-32 | 17/64" | 0.020" to 0.080" | Ribbed | 0.27" | 0.420" | 0.305" | 0.390" | 0.030" | 25 | 000000000 | 00000 |
| 6-32 | 17/64" | 0.080" to 0.130" | Ribbed | 0.27" | 0.470" | 0.305" | 0.390" | 0.030" | 25 | 000000000 | 0000 |
| 8-32 | 17/64" | 0.020" to 0.080" | Ribbed | 0.27" | 0.420" | 0.305" | 0.390" | 0.030" | 25 | 000000000 | 0000 |
| 8-32 | 17/64" | 0.080" to 0.130" | Ribbed | 0.27" | 0.470" | 0.305" | 0.390" | 0.030" | 25 | 000000000 | 00000 |
| 10-24 | 19/64" | 0.020" to 0.130" | Ribbed | 0.3" | 0.475" | 0.315" | 0.415" | 0.030" | 25 | 000000000 | 00000 |
| 10-24 | 19/64" | 0.130" to 0.225" | Ribbed | 0.3" | 0.585" | 0.315" | 0.415" | 0.030" | 25 | 000000000 | 00000 |
| 10-32 | 19/64" | 0.020" to 0.130" | Ribbed | 0.3" | 0.475" | 0.315" | 0.415" | 0.030" | 25 | 000000000 | 00000 |
| 10-32 | 19/64" | 0.130" to 0.225" | Ribbed | 0.3" | 0.585" | 0.315" | 0.415" | 0.030" | 25 | 000000000 | 00000 |
| 1/4"-20 | 25/64" | 0.027" to 0.165" | Ribbed | 0.39" | 0.580" | 0.380" | 0.500" | 0.030" | 25 | 000000000 | 00000 |
| 1/4"-20 | 25/64" | 0.165" to 0.260" | Ribbed | 0.39" | 0.680" | 0.380" | 0.500" | 0.030" | 10 | 000000000 | 0000 |
| 5/16"-18 | 17/32" | 0.027" to 0.150" | Ribbed | 0.53" | 0.690" | 0.470" | 0.685" | 0.035" | 10 | 000000000 | 0000 |
| 5/16"-18 | 17/32" | 0.150" to 0.312" | Ribbed | 0.53" | 0.805" | 0.425" | 0.685" | 0.035" | 10 | 000000000 | 0000 |
| 3/8"-16 | 17/32" | 0.027" to 0.150" | Ribbed | 0.53" | 0.690" | 0.470" | 0.685" | 0.035" | 10 | 000000000 | 00000 |
| 3/8"-16 | 17/32" | 0.150" to 0.312" | Ribbed | 0.53" | 0.805" | 0.425" | 0.685" | 0.035" | 10 | 000000000 | 00000 |
Thread | Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Drill Bit Size | For Material Thick., mm | Type | Dia., mm | Lg., mm | Installed Lg., mm | Dia., mm | Thick., mm | Pkg. Qty. | Pkg. | |
Aluminum | ||||||||||||
| M4 | 0.7 | 6.8 mm | 0.5 to 2 | Ribbed | 6.7 | 10.7 | 7.8 | 9.9 | 0.8 | 25 | 000000000 | 000000 |
| M4 | 0.7 | 6.8 mm | 2 to 3.3 | Ribbed | 6.7 | 11.9 | 7.8 | 9.9 | 0.8 | 25 | 000000000 | 00000 |
| M5 | 0.8 | 7.6 mm | 0.5 to 3.3 | Ribbed | 7.5 | 12.1 | 8 | 10.5 | 0.8 | 25 | 000000000 | 00000 |
| M5 | 0.8 | 7.6 mm | 3.3 to 5.7 | Ribbed | 7.5 | 14.9 | 8 | 10.5 | 0.8 | 25 | 000000000 | 00000 |
| M6 | 1 | 10 mm | 0.7 to 4.2 | Ribbed | 9.9 | 14.7 | 9.7 | 12.7 | 0.8 | 25 | 000000000 | 00000 |
| M6 | 1 | 10 mm | 4.2 to 6.6 | Ribbed | 9.9 | 17.3 | 9.7 | 12.7 | 0.8 | 10 | 000000000 | 0000 |
| M8 | 1.25 | 13.5 mm | 0.7 to 3.8 | Ribbed | 13.5 | 17.5 | 11.9 | 17.4 | 0.9 | 10 | 000000000 | 0000 |
| M8 | 1.25 | 13.5 mm | 3.8 to 7.9 | Ribbed | 13.5 | 20.5 | 10.8 | 17.4 | 0.9 | 10 | 000000000 | 0000 |
| M10 | 1.5 | 13.5 mm | 0.7 to 3.8 | Ribbed | 13.5 | 17.5 | 11.9 | 17.4 | 0.9 | 10 | 000000000 | 00000 |
| M10 | 1.5 | 13.5 mm | 3.8 to 7.9 | Ribbed | 13.5 | 20.5 | 10.8 | 17.4 | 0.9 | 10 | 000000000 | 00000 |
Twist-Resistant Rivet Nuts for Soft Materials
Wedges under the flange lock the nut in place in soft materials such as brass and aluminum, so it won't turn when tightening a screw. Made from aluminum, they're one-third the weight of steel and mildly corrosion resistant. Install in a drilled hole with a hydraulic/air-powered rivet nut tool. The tool collapses the nut, creating a backside flange that holds the nut to the material. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Installed Lg. | Dia. | Thick. | Pkg. Qty. | Pkg. | |
Aluminum | |||||||||||
| 6-32 | 17/64" | 0.020" to 0.080" | Ribbed | 0.27" | 0.420" | 0.305" | 0.390" | 0.030" | 10 | 000000000 | 00000 |
| 6-32 | 17/64" | 0.080" to 0.130" | Ribbed | 0.27" | 0.470" | 0.305" | 0.390" | 0.030" | 10 | 000000000 | 0000 |
| 8-32 | 17/64" | 0.020" to 0.080" | Ribbed | 0.27" | 0.420" | 0.305" | 0.390" | 0.030" | 10 | 000000000 | 0000 |
| 8-32 | 17/64" | 0.080" to 0.130" | Ribbed | 0.27" | 0.470" | 0.305" | 0.390" | 0.030" | 10 | 000000000 | 0000 |
| 10-24 | 19/64" | 0.020" to 0.130" | Ribbed | 0.30" | 0.475" | 0.315" | 0.415" | 0.030" | 10 | 000000000 | 0000 |
| 10-24 | 19/64" | 0.130" to 0.225" | Ribbed | 0.30" | 0.585" | 0.315" | 0.415" | 0.030" | 10 | 000000000 | 0000 |
| 10-32 | 19/64" | 0.020" to 0.130" | Ribbed | 0.30" | 0.475" | 0.315" | 0.415" | 0.030" | 10 | 000000000 | 0000 |
| 10-32 | 19/64" | 0.130" to 0.225" | Ribbed | 0.30" | 0.585" | 0.315" | 0.415" | 0.030" | 10 | 000000000 | 0000 |
| 1/4"-20 | 25/64" | 0.027" to 0.165" | Ribbed | 0.39" | 0.580" | 0.380" | 0.500" | 0.030" | 10 | 000000000 | 00000 |
| 1/4"-20 | 25/64" | 0.165" to 0.260" | Ribbed | 0.39" | 0.680" | 0.380" | 0.500" | 0.030" | 10 | 000000000 | 00000 |
| 5/16"-18 | 17/32" | 0.027" to 0.150" | Ribbed | 0.53" | 0.690" | 0.470" | 0.685" | 0.035" | 5 | 000000000 | 0000 |
| 5/16"-18 | 17/32" | 0.150" to 0.312" | Ribbed | 0.53" | 0.805" | 0.425" | 0.685" | 0.035" | 5 | 000000000 | 0000 |
| 3/8"-16 | 17/32" | 0.027" to 0.150" | Ribbed | 0.53" | 0.690" | 0.470" | 0.685" | 0.035" | 5 | 000000000 | 00000 |
| 3/8"-16 | 17/32" | 0.150" to 0.312" | Ribbed | 0.53" | 0.805" | 0.425" | 0.685" | 0.035" | 5 | 000000000 | 00000 |
Aluminum Low-Profile Rivet Nuts
These low-profile rivet nuts are one-third the weight of steel rivet nuts. They have a low profile for light duty fastening in low-clearance applications. A cadmium or tin-zinc plating provides corrosion resistance and adds lubricity so they collapse smoothly. The threaded portion is drawn into the sleeve when installed, creating pressure against the hole to secure the nut. Drill bit size listed in the table is for material with a 0.030"-0.090" thickness. These rivet nuts may be installed in thicker material, but may require larger holes. Install them using a hand- or power-driven rivet nut tool. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Rivet Nuts | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Body | Flange | Hand-Driven Tools | Mandrels | ||||||||||||
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Installed Lg. | Dia. | Thick. | Pkg. Qty. | Pkg. | Each | Each | |||
Cadmium-Plated Aluminum | |||||||||||||||
| 10-24 | 9/32" | 0.03" to 0.09" | Sleeve | 0.280" | 0.355" | 0.145" | 0.306" | 0.015" | 10 | 000000000 | 000000 | 000000000 | 000000 | 000000000 | 000000 |
| 1/4"-28 | 3/8" | 0.03" to 0.09" | Sleeve | 0.374" | 0.500" | 0.245" | 0.400" | 0.015" | 5 | 000000000 | 0000 | 000000000 | 00000 | 000000000 | 00000 |
| 5/16"-18 | 1/2" | 0.03" to 0.09" | Sleeve | 0.499" | 0.600" | 0.295" | 0.528" | 0.015" | 5 | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
Tin-Zinc Plated Aluminum | |||||||||||||||
| 4-40 | 3/16" | 0.03" to 0.09" | Sleeve | 0.187" | 0.355" | 0.145" | 0.211" | 0.015" | 10 | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 6-32 | 7/32" | 0.03" to 0.09" | Sleeve | 0.218" | 0.355" | 0.145" | 0.240" | 0.015" | 10 | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 8-32 | 1/4" | 0.03" to 0.09" | Sleeve | 0.249" | 0.355" | 0.145" | 0.269" | 0.015" | 10 | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 10-32 | 9/32" | 0.03" to 0.09" | Sleeve | 0.280" | 0.370" | 0.145" | 0.306" | 0.02" | 25 | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 1/4"-20 | 3/8" | 0.03" to 0.09" | Sleeve | 0.374" | 0.500" | 0.245" | 0.400" | 0.015" | 10 | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 3/8"-16 | 9/16" | 0.03" to 0.09" | Sleeve | 0.561" | 0.730" | 0.360" | 0.588" | 0.015" | 5 | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
Rivet Nuts | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread | Body | Flange | Hand-Driven Tools | Mandrels | ||||||||||||
| Size | Pitch, mm | Drill Bit Size | For Material Thick. | Type | Dia., mm | Lg., mm | Installed Lg., mm | Dia., mm | Thick., mm | Pkg. Qty. | Pkg. | Each | Each | |||
Cadmium-Plated Aluminum | ||||||||||||||||
| M3 | 0.5 | 4.8 mm | 0.03" to 0.09" | Sleeve | 4.8 | 9 | 5.124 | 5.36 | 0.4 | 10 | 000000000 | 000000 | 000000000 | 000000 | 000000000 | 000000 |
| M4 | 0.7 | 6.4 mm | 0.03" to 0.09" | Sleeve | 6.3 | 9 | 5.124 | 6.83 | 0.4 | 10 | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| M6 | 1 | 9.5 mm | 0.03" to 0.09" | Sleeve | 9.5 | 12.7 | 6.924 | 10.16 | 0.4 | 5 | 000000000 | 0000 | 000000000 | 00000 | 000000000 | 00000 |
| M8 | 1.25 | 12.7 mm | 0.03" to 0.09" | Sleeve | 12.7 | 15.2 | 8.224 | 13.41 | 0.4 | 5 | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
Tin-Zinc Plated Aluminum | ||||||||||||||||
| M5 | 0.8 | 7.1 mm | 0.03" to 0.09" | Sleeve | 7.1 | 9 | 5.124 | 7.77 | 0.4 | 10 | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
Aluminum Rivet Nuts
These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance. Also known as blind inserts, they can be installed when you have access to only one side of the material. Install in a drilled hole using a rivet nut tool. The tool collapses the nut, creating a backside flange that holds the nut to the material. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Body Type | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Installed Lg. | Dia. | Thick. | Pkg. Qty. | Pkg. | |
Aluminum | |||||||||||
| 6-32 | No. 12 | 0.010" to 0.075" | Smooth | 0.19" | 0.438" | 0.428" | 0.325" | 0.032" | 50 | 000000000 | 000000 |
| 8-32 | No. 2 | 0.010" to 0.075" | Smooth | 0.22" | 0.438" | 0.305" | 0.357" | 0.032" | 50 | 000000000 | 00000 |
| 8-32 | No. 2 | 0.075" to 0.120" | Smooth | 0.22" | 0.500" | 0.255" | 0.357" | 0.032" | 25 | 000000000 | 0000 |
| 8-32 | No. 2 | 0.120" to 0.160" | Smooth | 0.22" | 0.500" | 0.260" | 0.357" | 0.032" | 25 | 000000000 | 0000 |
| 10-24 | 1/4" | 0.010" to 0.080" | Smooth | 0.25" | 0.531" | 0.521" | 0.406" | 0.038" | 25 | 000000000 | 00000 |
| 10-24 | 1/4" | 0.080" to 0.130" | Smooth | 0.25" | 0.594" | 0.514" | 0.406" | 0.038" | 25 | 000000000 | 0000 |
| 10-32 | 1/4" | 0.010" to 0.080" | Smooth | 0.25" | 0.531" | 0.380" | 0.406" | 0.038" | 25 | 000000000 | 0000 |
| 10-32 | 1/4" | 0.080" to 0.130" | Smooth | 0.25" | 0.594" | 0.390" | 0.406" | 0.038" | 25 | 000000000 | 0000 |
| 10-32 | 1/4" | 0.130" to 0.180" | Smooth | 0.25" | 0.641" | 0.390" | 0.406" | 0.038" | 25 | 000000000 | 0000 |
| 1/4"-20 | Q | 0.020" to 0.080" | Smooth | 0.33" | 0.625" | 0.440" | 0.475" | 0.058" | 25 | 000000000 | 0000 |
| 1/4"-20 | Q | 0.080" to 0.140" | Smooth | 0.33" | 0.687" | 0.440" | 0.475" | 0.058" | 25 | 000000000 | 0000 |
| 1/4"-20 | Q | 0.140" to 0.200" | Smooth | 0.33" | 0.750" | 0.440" | 0.475" | 0.058" | 25 | 000000000 | 0000 |
| 1/4"-20 | Q | 0.200" to 0.260" | Smooth | 0.33" | 0.812" | 0.445" | 0.475" | 0.058" | 25 | 000000000 | 00000 |
| 5/16"-18 | Z | 0.030" to 0.125" | Smooth | 0.41" | 0.750" | 0.720" | 0.665" | 0.062" | 25 | 000000000 | 0000 |
| 5/16"-18 | Z | 0.125" to 0.200" | Smooth | 0.41" | 0.875" | 0.750" | 0.665" | 0.062" | 25 | 000000000 | 0000 |
| 3/8"-16 | 1/2" | 0.030" to 0.115" | Smooth | 0.49" | 0.844" | 0.814" | 0.781" | 0.088" | 25 | 000000000 | 00000 |
| 3/8"-16 | 1/2" | 0.115" to 0.200" | Smooth | 0.49" | 0.938" | 0.823" | 0.781" | 0.088" | 25 | 000000000 | 0000 |
Flange-Sealing Rivet Nuts
The PVC foam seal under the flange keeps liquids and gasses from leaking between the nut and the surrounding material. These rivet nuts have a ribbed body to hold them in place when tightening a screw. The body is aluminum and mildly corrosion resistant. Install in a drilled hole using a rivet nut tool. The tool collapses the nut, creating a backside flange that holds the nut to the material. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Body | Flange | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Installed Lg. | Dia. | Thick. | Seal Material | Pkg. Qty. | Pkg. | |
Aluminum | ||||||||||||
| 6-32 | 17/64" | 0.020" to 0.080" | Ribbed | 0.265" | 0.420" | 0.305" | 0.390" | 0.030" | PVC Foam | 10 | 000000000 | 00000 |
| 6-32 | 17/64" | 0.080" to 0.130" | Ribbed | 0.265" | 0.470" | 0.305" | 0.390" | 0.030" | PVC Foam | 10 | 000000000 | 0000 |
| 8-32 | 17/64" | 0.020" to 0.080" | Ribbed | 0.265" | 0.420" | 0.305" | 0.390" | 0.030" | PVC Foam | 10 | 000000000 | 0000 |
| 8-32 | 17/64" | 0.080" to 0.130" | Ribbed | 0.265" | 0.470" | 0.305" | 0.390" | 0.030" | PVC Foam | 10 | 000000000 | 0000 |
| 10-24 | 19/64" | 0.020" to 0.130" | Ribbed | 0.296" | 0.475" | 0.315" | 0.415" | 0.030" | PVC Foam | 10 | 000000000 | 0000 |
| 10-24 | 19/64" | 0.130" to 0.225" | Ribbed | 0.296" | 0.585" | 0.315" | 0.415" | 0.030" | PVC Foam | 10 | 000000000 | 0000 |
| 10-32 | 19/64" | 0.020" to 0.130" | Ribbed | 0.296" | 0.475" | 0.315" | 0.415" | 0.030" | PVC Foam | 10 | 000000000 | 0000 |
| 1/4"-20 | 25/64" | 0.027" to 0.165" | Ribbed | 0.390" | 0.580" | 0.380" | 0.500" | 0.030" | PVC Foam | 10 | 000000000 | 0000 |
| 1/4"-20 | 25/64" | 0.027" to 0.165" | Ribbed | 0.390" | 0.680" | 0.380" | 0.500" | 0.030" | PVC Foam | 10 | 000000000 | 00000 |
| 5/16"-18 | 17/32" | 0.027" to 0.150" | Ribbed | 0.530" | 0.705" | 0.470" | 0.710" | 0.035" | PVC Foam | 10 | 000000000 | 0000 |
| 5/16"-18 | 17/32" | 0.150" to 0.312" | Ribbed | 0.530" | 0.805" | 0.425" | 0.685" | 0.035" | PVC Foam | 10 | 000000000 | 0000 |
| 3/8"-16 | 17/32" | 0.027" to 0.150" | Ribbed | 0.530" | 0.690" | 0.470" | 0.685" | 0.035" | PVC Foam | 5 | 000000000 | 0000 |
| 3/8"-16 | 17/32" | 0.150" to 0.312" | Ribbed | 0.530" | 0.805" | 0.425" | 0.685" | 0.035" | PVC Foam | 5 | 000000000 | 00000 |
Thread | Body | Flange | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Drill Bit Size | For Material Thick., mm | Type | Dia., mm | Lg., mm | Installed Lg., mm | Dia., mm | Thick. | Seal Material | Pkg. Qty. | Pkg. | |
Aluminum | |||||||||||||
| M4 | 0.7 | 6.8 mm | 2.000 to 3.300 | Ribbed | 6.700 | 11.900 | 7.800 | 9.900 | 0.800mm | PVC Foam | 10 | 000000000 | 000000 |
| M5 | 0.8 | 7.6 mm | 0.500 to 3.300 | Ribbed | 7.500 | 12.100 | 8.000 | 10.500 | 0.800mm | PVC Foam | 10 | 000000000 | 00000 |
| M6 | 1 | 10 mm | 0.700 to 4.200 | Ribbed | 9.900 | 14.700 | 9.700 | 12.700 | 0.800mm | PVC Foam | 10 | 000000000 | 00000 |
| M8 | 1.25 | 13.5 mm | 0.700 to 3.800 | Ribbed | 13.500 | 17.500 | 11.900 | 17.400 | 0.900" | PVC Foam | 10 | 000000000 | 00000 |
Rivet Nut Assortments
These rivet nuts have a smooth body and fit in smaller holes than twist-resistant rivet nuts. Assortments include rivet nuts, mandrels, nosepieces, and a plier-style installation tool. To install, thread the rivet nut onto the mandrel, insert the nut into a drilled hole, and squeeze the handles to secure the nut.
Aluminum rivet nuts are one-third the weight of steel rivet nuts and resist corrosion in wet environments.
| Number of Pieces | Material | Rivet Nuts Included | For Material Thick. | Includes | Container Type | Each | |
Inch | |||||||
|---|---|---|---|---|---|---|---|
| 112 | Aluminum, Steel | Aluminum 6-32 (25 Pieces) Aluminum 1/4"-20 (20 Pieces) Steel 8-32 (25 Pieces) Steel 10-24 (25 Pieces) Steel 1/4"-20 (8 Pieces) | 0.01"-0.165" | Four Nosepieces Four Mandrels Plier-Style Installation Tool | Plastic Case | 000000000 | 000000 |
| 203 | Aluminum | 8-32 (80 Pieces) 10-32 (120 Pieces) | 0.01"-0.18" | Two Nosepieces with Mandrels Plier-Style Installation Tool | Plastic Case | 000000000 | 000000 |
Metric | |||||||
| 203 | Aluminum | M4 (120 Pieces) M5 (80 Pieces) | 0.25mm-5mm | Two Nosepieces with Mandrels Plier-Style Installation Tool | Plastic Case | 000000000 | 000000 |