Thread Size Thread Size | Show |
|---|
Thread Size Thread Size | Hide |
|---|
For Rivet Nut Material For Rivet Nut Material |
|---|
|
For Maximum Material Thickness For MaximumMaterial Thickness |
|---|
|
Material Material |
|---|
|
For Minimum Material Thickness For MinimumMaterial Thickness |
|---|
|
For Use In For Use In |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Nut Type Nut Type |
|---|
 | Rivet |
Weight Weight |
|---|
|
End Type End Type |
|---|
|
Installed Length Installed Length |
|---|
|
Thread Type Thread Type |
|---|
About Nuts, Materials, and Finishes
More
Steel Twist-Resistant Rivet Nuts
About twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc yellow-chromate plated for corrosion resistance. A ribbed body holds the nut in place so it won't turn when tightening a screw. Also known as blind inserts, they can be installed when you have access to only one side of the material. Install in a drilled hole using a rivet nut tool. The tool collapses the nut, creating a backside flange that holds the nut to the material. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Steel Low-Profile Rivet Nuts
These steel low-profile rivet nuts are about twice as strong as aluminum rivet nuts. They have a low profile for light duty fastening in low-clearance applications. A cadmium or tin-zinc plating provides corrosion resistance and adds lubricity so they collapse smoothly. The threaded portion is drawn into the sleeve when installed, creating pressure against the hole to secure the nut. Drill bit size listed in the table is for material with a 0.030"-0.090" thickness. These rivet nuts may be installed in thicker material, but may require larger holes. Install them using a hand- or power-driven rivet nut tool. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Stainless Steel Low-Profile Rivet Nuts
The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals. They're often used for light duty fastening in low-clearance applications. The threaded portion is drawn into the sleeve when installed, creating pressure against the hole to secure the nut. The tin-plating provides lubricity allowing the nut to collapse smoothly. Drill bit size listed in the table is for material with a 0.030"-0.090" thickness. These rivet nuts can be installed in thicker material, but may require larger holes. Install them using a hand- or power-driven rivet nut tool. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Aluminum Low-Profile Rivet Nuts
These low-profile rivet nuts are one-third the weight of steel rivet nuts. They have a low profile for light duty fastening in low-clearance applications. A cadmium or tin-zinc plating provides corrosion resistance and adds lubricity so they collapse smoothly. The threaded portion is drawn into the sleeve when installed, creating pressure against the hole to secure the nut. Drill bit size listed in the table is for material with a 0.030"-0.090" thickness. These rivet nuts may be installed in thicker material, but may require larger holes. Install them using a hand- or power-driven rivet nut tool. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Wrench-Driven Rivet Nut Tools
Use these tools to install most styles of rivet nuts. A wrench and ratchet are required to hold the tool and tighten the nut.
For technical drawings and 3-D models, click on a part number.
| For Thread Size | For Wrench Size | For Ratchet Size | For Rivet Nut Body Type | For Rivet Nut Material | Each | |
| 1/4"-20, 1/4"-28 | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | Aluminum, Steel | 000000000 | 000000 |
Hand-Driven Tools for Low-Profile Rivet Nuts
Turn these tools by hand to install low-profile rivet nuts. The required mandrels are sold separately. To use, thread the nut onto a mandrel of the same size, then place it into a hole, push down on the tool's T-handle, and turn clockwise.
| For Thread Size | For Rivet Nut Body Type | For Rivet Nut Material | Overall Lg. | Each | |
| 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, M3, M4, M5, M6, M8, M10 | Sleeve | 18-8 Stainless Steel, Aluminum, Steel | 5 7/8" | 000000000 | 000000 |
| For Thread Size | Each | |
| 4-40 | 000000000 | 000000 |
| 6-32 | 000000000 | 00000 |
| 8-32 | 000000000 | 00000 |
| 10-24 | 000000000 | 00000 |
| 10-32 | 000000000 | 00000 |
| 12-24 | 000000000 | 00000 |
| 1/4"-20 | 000000000 | 00000 |
| 1/4"-28 | 000000000 | 00000 |
| 5/16"-18 | 000000000 | 00000 |
| 5/16"-24 | 000000000 | 00000 |
| 3/8"-16 | 000000000 | 00000 |
| 3/8"-24 | 000000000 | 00000 |
| M3 × 0.5 mm | 000000000 | 00000 |
| M4 × 0.7 mm | 000000000 | 00000 |
| M5 × 0.8 mm | 000000000 | 00000 |
| M6 × 1 mm | 000000000 | 00000 |
| M8 × 1.25 mm | 000000000 | 00000 |
| M10 × 1.5 mm | 000000000 | 00000 |
Lever-Style Rivet Nut Tools
Use two hands to maximize leverage when installing smooth body rivet nuts. These tools include a mandrel and nosepiece for 1/4"-20 size nuts (additional sizes sold separately). A mandrel and nosepiece are required for installation. To use, thread the nut onto the mandrel, insert the nut into a drilled hole, and squeeze the handles to secure the nut.
They are also compatible with rivet-type studs.
Tools with knob have a spin-to-reverse knob to quickly unthread the mandrel from the installed nut.
Tools with plunger have a quick-acting, pull-to-remove plunger that unthreads the mandrel from the installed nut.
| Removal Type | For Smooth Rivet Nut Thread Size | For Rivet Stud Thread Size | Weight, lbs. | Includes | Each | |
| Knob | 8-32, 10-24, 10-32, 1/4"-20, 1/4"-28, 5/16"-18, 3/8"-16, 1/2"-13, M5, M6, M8, M10 | 10-24, 10-32, 1/4"-20, 5/16"-18, M5, M6, M8 | 4 | Mandrel and nosepiece for 1/4"-20 smooth rivet nuts | 000000000 | 0000000 |
| Plunger | 8-32, 10-24, 10-32, 1/4"-20, 1/4"-28, 5/16"-18, 3/8"-16, M5, M6, M8, M10 | 10-24, 10-32, 1/4"-20, 5/16"-18, M5, M6, M8 | 4 1/2 | Mandrel and nosepiece for 1/4"-20 smooth rivet nuts | 000000000 | 000000 |
| For Thread Size | Each | |
For Rivet Stud—Nosepiece | ||
|---|---|---|
| 10-24 | 000000000 | 000000 |
| 10-32 | 000000000 | 00000 |
| 1/4"-20 | 000000000 | 00000 |
| 5/16"-18 | 000000000 | 00000 |
| M5 | 000000000 | 00000 |
| M6 | 000000000 | 00000 |
| M8 | 000000000 | 00000 |
For Smooth Rivet Nut—Nosepiece and Mandrel | ||
| 8-32 | 000000000 | 00000 |
| 10-24 | 000000000 | 00000 |
| 10-32 | 000000000 | 00000 |
| 1/4"-20 | 000000000 | 00000 |
| 1/4"-28 | 000000000 | 00000 |
| 5/16"-18 | 000000000 | 00000 |
| 3/8"-16 | 000000000 | 00000 |
| 1/2"-13 | 000000000 | 00000 |
| M5 × 0.8 mm | 000000000 | 00000 |
| M6 × 1 mm | 000000000 | 00000 |
| M8 × 1.25 mm | 000000000 | 00000 |
| M10 × 1.5 mm | 000000000 | 00000 |
Lever-Style Rivet Nut Tools with Visual Stroke Indicator
An indicator allows you to ensure your rivet nut installs correctly. Thread the rivet nut onto the mandrel, insert the nut into a drilled hole, and squeeze the handles to secure the nut. Mandrel and nosepiece sets are required and sold separately.
Tools with knob install rivet-type studs and smooth and ribbed body rivet nuts. They have a spin-to-reverse knob to quickly unthread the mandrel from the installed nut.
Tools with plunger install smooth and ribbed body rivet nuts. They have a quick-acting, pull-to-remove plunger that unthreads the mandrel from the installed nut.
| Removal Type | For Smooth Rivet Nut Thread Size | For Ribbed Rivet Nut Thread Size | For Rivet Stud Thread Size | Stroke Type | Weight, lbs. | Each | |
| Knob | 6-32, 8-32, 10-24, 10-32, 1/4"-20, M4, M5, M6 | 6-32, 8-32, 10-24, 10-32, 1/4"-20, 1/4"-28, 5/16"-18, 3/8"-16, M4, M5, M6, M8, M10 | 6-32, 8-32, 10-24, 10-32, 1/4"-20, 1/4"-28, 5/16"-18, 3/8"-16, M4, M5, M6, M8, M10 | Adjustable | 4 1/2 | 000000000 | 0000000 |
| Plunger | 6-32, 8-32, 10-24, 10-32, 1/4"-20, 1/4"-28, 5/16"-18, M4, M5, M6, M8 | 6-32, 8-32, 10-24, 10-32, 1/4"-20, 1/4"-28, 5/16"-18, 3/8"-16, 1/2"-13, 1/2"-20, M4, M5, M6, M8, M10 | __ | Adjustable | 5 | 000000000 | 000000 |
Air-Powered Rivet Nut Tools
Smaller and lighter than cordless and hydraulic rivet nut tools, use these to install smooth rivet nuts. To use, thread the nut onto the included mandrel and press the trigger to spin the nut onto the tool. Place the nut into the material and press the trigger to install the nut. Press the trigger one more time to spin the mandrel off.
Air Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Thread Size | For Rivet Nut Body Type | For Rivet Nut Material | Head Lg. | Overall Ht. | Operating Pressure, psi | Pipe Size | Thread Type | Weight, lbs. | Includes | Each | |
| 1/4"-28 | Smooth | Aluminum, Steel | 6" | 6" | 70 to 80 | 1/4 | NPT | 4 | Mandrel, Nosepiece | 000000000 | 0000000 |
| For Thread Size | Each | |
| 1/4"-28 | 000000000 | 00000 |
| For Thread Size | Includes | Each | |
| 1/4"-28 | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 0000000 |
Tools for Blind Rivets and Rivet Nuts
This tool has changeable nosepieces, anvils, and pull-up studs for installing rivets and rivet nuts. A self-contained hydraulic system delivers additional force to make installation easier. Choose the attachment that matches your rivet's diameter or nut thread size. To install a rivet, insert the mandrel into the nosepiece of the tool. Place the rivet in the material and squeeze the handles. The tool pulls the mandrel through the rivet's body, creating a secure hold on both sides of the material, and breaks off the excess mandrel.
Pull-up studs and driving anvils for 6-32 to 3/8"-16 and M3 to M10 rivet nuts are sold separately.
Nose | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Lg. | Ht. | For Rivet Nut Material | For Rivet Nut Thread Size | Hydraulic Oil Included | Includes | Each | |
| 1 1/16" | 2 1/4" | 9 1/2" | 6 3/8" | Aluminum, Steel | 10-24, 1/4"-28, 10-32, 3/8"-16, 5/16"-18, 6-32, 8-32, M10, M3, M4, M5, M6, M8, 1/4"-20 | Yes | Five nosepieces (3/32", 1/8", 5/32", 3/16", and 1/4") Two anvils (10-24 and 1/4"-20) Two pull-up studs (10-24 and 1/4"-20) | 0000000 | 0000000 |
| For Rivet Nut Thread Size | Lg. | Each | |
| 6-32 | 1 9/16" | 00000000 | 000000 |
| 8-32 | 1 1/4" | 00000000 | 00000 |
| 10-24 | 1 1/2" | 00000000 | 00000 |
| 10-32 | 1 1/2" | 00000000 | 00000 |
| 1/4"-20 | 1 13/16" | 00000000 | 00000 |
| 1/4"-28 | 1 1/2" | 00000000 | 00000 |
| 5/16"-18 | 2 1/8" | 00000000 | 00000 |
| 3/8"-16 | 2 1/8" | 0000000 | 00000 |
| M3 | 1 1/2" | 0000000 | 00000 |
| M4 | 1 7/16" | 00000000 | 00000 |
| M5 | 1 3/8" | 00000000 | 00000 |
| M6 | 1 13/16" | 00000000 | 00000 |
| M8 | 2" | 00000000 | 00000 |
| M10 | 1 7/16" | 00000000 | 00000 |