Made of 18-8 stainless steel, these rivet nuts withstand water, mild chemicals, and outdoor conditions better than zinc-plated steel nuts. A ribbed body grips surrounding material to hold them in place, keeping them from spinning as you tighten screws.

Originally designed for Formula 1 racecars, these titanium rivet nuts are the best choice when you need a high strength-to-weight ratio—they're 40% lighter than steel nuts.

A ribbed body on these rivet nuts and wedges under the flange bite into soft materials such as brass, aluminum, and composites to prevent spinning when you tighten a screw.

Made of stainless steel, these rivet nuts hold up better outdoors than zinc-plated steel rivet nuts.

To grip all layers of a sandwich panel—the top, core, and bottom—these rivet nuts have a two-piece construction.

With a durable plastic seal around a closed body, these rivet nuts add threads to sheet metal without letting water or dust pass through.

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

These low-profile rivet nuts are one-third the weight of steel and have mild corrosion resistance.

A nonconductive rubber coating insulates the nut from electricity, seals out moisture, and damps vibration.

To block out moisture and resist corrosion in wet environments, these steel rivet nuts have a PVC plastic flange and a zinc-plated body. Install them in sheet metal with only a screw, no special tools required.

These rivet nuts have a smooth body and fit in smaller holes than twist-resistant rivet nuts. Assortments include rivet nuts, mandrels, nosepieces, and a plier-style installation tool.

Turn these tools by hand to install low-profile rivet nuts.

Smaller and lighter than cordless and hydraulic rivet nut tools, use these to install thin-walled bulbed, ribbed, sleeve, and smooth rivet nuts.

Install nearly any size or style of rivet nut in five seconds or less.

Install rivet nuts with one hand.

Avoid failed rivet nuts by periodically testing the pull force of your rivet nut tool. These calibrators work with air-powered and hydraulic/air-powered rivet nut tools.