Filter by
For Robot Arm Manufacturer
For Robot Arm Manufacturer Series
Robot Cell Component
For Robot Arm Manufacturer Model Number
Mounting Location
REACH
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Weight
Finish
Robot Tool Mounts for T-Slotted Framing
 |
Connect your robot arm to tools or extensions made from T-slotted framing. These mounts are often used to support custom tools for uniquely shaped items, such as a rig to lift chairs off of a line, or as a mounting base for a screwdriver. They use ISO mounting patterns, an industry standard for arm connections. Mounts come with all the hardware needed to connect them to robot arms, but not the bolts required to connect T-slotted framing to the mounts. If you don't see your robot model number listed, measure the bolt circle diameter to determine mounting compatibility.
Round Mounting Plates
 |  |
Round mounting plates are compatible with several ISO mounting patterns, so they connect to a wide variety of robot arms. They’re also lighter and smaller than other mounting plates, so they fit in tight spaces. However, with only two mounting holes for T-slotted framing, they have fewer attachment options than other mounting plates.
Aluminum—These mounts are made of aluminum, so they’re corrosion resistant, lightweight, and machinable. The lightness helps you keep robot arms under their payload, or weight limit, and the machinability means you can drill your own holes.
End of Robot Arm Mounting Location | For Rail Ht. | T-Slotted Framing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mount Type | Bolt Circle Dia. (Mounting Hole Pattern Compatibility) | Mounting Fasteners Included | Single | Double and Quad | Triple | Mount Type | For Bolt Size (No. of) | Mounting Fasteners Included | Max. Load Cap. | Wt. | For Robot Arm Mfr. (Series/Model No.) | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Aluminum | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bolt On | 31.5 mm (ISO 31.5) 40 mm (ISO 40) 50 mm (ISO 50) 63 mm (ISO 63) | Yes | 1" | 2" | 3" | Bolt On | M6 (2) | No | 110 lb. 50 kg | 0.31 lb. 0.14 kg | ABB (IRB 360 6/1600, 8/1130; IRB 120; IRB 140; IRB 1200; IRB 1410; IRB 1520ID; IRB 1600; IRB 2400; IRB 2600) FANUC (CR 4iA, 7iA; CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA; LR Mate 200iD/7L; M-20 iA) KUKA Robotics (KR 10 R1100-2) Omron (TM 5, 12, 14) Precise Automation (PAVP6; PF3400; PP100) Productive Robotics (OB7) Staubli (TX2 90) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S; HC 10T; SIA 10D, 10F) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
X-Shaped Mounting Plates
 | |
X-shaped mounting plates have a broad surface area, spreading out T-slotted framing or robot tools for handling large objects.
Powder-Coated Aluminum—These mounts are made of aluminum, so they’re corrosion resistant, lightweight, and machinable. The lightness helps you keep robot arms under their payload, or weight limit, and the machinability means you can drill your own holes.
End of Robot Arm Mounting Location | For Rail Ht. | T-Slotted Framing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mount Type | Bolt Circle Dia. (Mounting Hole Pattern Compatibility) | Mounting Fasteners Included | Single | Double and Quad | Triple | Mount Type | For Bolt Size (No. of) | Mounting Fasteners Included | Max. Load Cap. | Wt. | For Robot Arm Mfr. (Series/Model No.) | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Blue Powder-Coated Aluminum | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bolt On | 50 mm (ISO 50) | Yes | 1" | 2" | 3" | Bolt On | 1/4" (16) | No | 35 lb. 16 kg | 0.93 lb. 0.42 kg | ABB (IRB 2400; IRB 2600) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Omron (TM 5, 12, 14) Staubli (TX2 90) Productive Robotics (OB7) | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Robot Tool Mounts for X-Shaped Mounting Plates
 | |
Black Anodized Aluminum Bolt On |
Robot Tool | End of Robot Arm Mounting Location | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mount Type | Bolt Circle Dia. (Mounting Hole Pattern Compatibility) | Bolt Hole Thread Size (No. of) | Mounting Fasteners Included | Mount Type | Bolt Circle Dia. (Mounting Hole Pattern Compatibility) | Mounting Fasteners Included | Max. Load Cap. | Wt. | For Robot Arm Mfr. (Series/Model No.) | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Black Anodized Aluminum | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bolt On | 50 mm (ISO 50) | M6 × 1 mm (4) | No | Bolt On | 31.5 mm (ISO 31.5) 40 mm (ISO 40) 63 mm (ISO 63) | Yes | 110 lb. 50 kg | 0.36 lb. 0.16 kg | ABB (IRB 360 6/1600, 8/1130; IRB 120; IRB 140; IRB 1200; IRB 1410; IRB 1520ID; IRB 1600) FANUC (CR 4iA, 7iA; 5iA, 10iA, 10iA/L, 20iA/L, 25iA; LR Mate 200iD/7L; M-20 iA) KUKA Robotics (KR 10 R1100-2) Precise Automation (PAVP6; PF3400; PP100) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S; HC 10T; SIA 10D, 10F) | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Robot Tool Mounts
 |
Connect robot tools to robot arms that have different ISO mounting patterns. Compatible with some models of Universal Robots (UR) and FANUC robots, these mounts are commonly used to equip robot arms with pick-and-place grippers, vacuum grippers, and sanders. They use ISO mounting patterns, an industry standard for arm connections. Mounts come with all the hardware you need to connect them to robot arms, but not all the hardware required to connect robot tools to mounts. If you don't see your robot model number listed, measure the bolt circle diameter to determine mounting compatibility.
To extend your robot arm’s reach, use long-reach robot tool mounts.
Black Anodized Aluminum
|  | |
Bolt On | Blank Mount |
Anodized aluminum mounts are a lightweight metal alternative to stainless steel, helping your robot arm stay under its payload limit, or the total capacity a robot can lift. They’re also more machinable than stainless steel, so you can drill your own holes for robots with unusual mounting patterns. These mounts resist corrosion.
Bolt On—Bolt-on mounts have ISO mounting patterns on the tool side.
Blank Mount—Blank mounts don’t have drilled holes on the tool side. Machine your own holes for compatibility with unusual mounting patterns.
Robot Tool | End of Robot Arm Mounting Location | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mount Type | Bolt Circle Dia. (Mounting Hole Pattern Compatibility) | Bolt Hole Thread Size (No. of) | Mounting Fasteners Included | Mount Type | Bolt Circle Dia. (Mounting Hole Pattern Compatibility) | Mounting Fasteners Included | Lg., mm | OD, mm | Wt. | Max. Load Cap. | For Robot Arm Mfr. (Series/Model No.) | Each | ||
| Bolt On | 31.5 mm (ISO 31.5) | M5 × 0.8 mm (4) | No | Bolt On | 40 mm (ISO 40) 50 mm (ISO 50) 63 mm (ISO 63) | Yes | 14 | 80 | 0.36 lb. 0.16 kg | 110 lb. 50 kg | ABB (IRB 360 6/1600, 8/1130; IRB 140; IRB 1410; IRB 1520ID; IRB 1600; IRB 2400; IRB 2600) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA; M-20 iA) Omron (TM 5, 12, 14) Precise Automation (PP100) Productive Robotics (OB7) Staubli (TX2 90) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Yaskawa Motoman (GP 10T, MH 10D, 10F) | 0000000 | 0000000 | |
| Bolt On | 40 mm (ISO 40) | M6 × 1 mm (4) | No | Bolt On | 31.5 mm (ISO 31.5) 50 mm (ISO 50) 63 mm (ISO 63) | Yes | 14 | 80 | 0.36 lb. 0.16 kg | 110 lb. 50 kg | ABB (IRB 120; IRB 1200; IRB 1520ID; IRB 2400; IRB 2600) FANUC (CR 4iA, 7iA; CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA; LR Mate 200iD/7L) KUKA Robotics (KR 10 R1100-2) Omron (TM 5, 12, 14) Precise Automation (PAVP6; PF3400) Productive Robotics (OB7) Staubli (TX2 90) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S; HC 10T; SIA 10D, 10F) | 0000000 | 000000 | |
| Bolt On | 63 mm (ISO 63) | M6 × 1 mm (4) | No | Bolt On | 31.5 mm (ISO 31.5) 40 mm (ISO 40) 50 mm (ISO 50) | Yes | 14 | 80 | 0.36 lb. 0.16 kg | 110 lb. 50 kg | ABB (IRB 360 6/1600, 8/1130; IRB 120; IRB 140; IRB 1200; IRB 1410; IRB 1600; IRB 2400; IRB 2600) FANUC (CR 4iA, 7iA; CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA; LR Mate 200iD/7L; M-20 iA) KUKA Robotics (KR 10 R1100-2) Omron (TM 5, 12, 14) Precise Automation (PAVP6; PF3400; PP100) Productive Robotics (OB7) Staubli (TX2 90) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S) | 0000000 | 000000 | |
| Blank | — | — | No | Bolt On | 31.5 mm (ISO 31.5) 40 mm (ISO 40) 50 mm (ISO 50) 63 mm (ISO 63) | Yes | 14 | 80 | 0.4 lb. 0.18 kg | 110 lb. 50 kg | ABB (IRB 360 6/1600, 8/1130; IRB 120; IRB 140; IRB 1200; IRB 1410; IRB 1520ID; IRB 1600; IRB 2400; IRB 2600) FANUC (CR 4iA, 7iA; CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA; LR Mate 200iD/7L; M-20 iA) KUKA Robotics (KR 10 R1100-2) Omron (TM 5, 12, 14) Precise Automation (PAVP6; PF3400; PP100) Productive Robotics (OB7) Staubli (TX2 90) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S; HC 10T; SIA 10D, 10F) | 0000000 | 000000 | |
Black Acetal
 | |
Threaded Mount |
Acetal mounts are lightweight and strong. Often used in food-processing plants, they won’t corrode from frequent washdowns with harsh cleaners.
Threaded Mount—Threaded mounts have a universal female-threaded connection on the tool side for attaching threaded tools, pipe, rods, and other components to robot arms. If you need a male-threaded connection, choose one with an included universal thread adapter. For other thread types and sizes, add a universal thread adapter.
Robot Tool | End of Robot Arm Mounting Location | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mount Type | Pipe Size | Gender | Mounting Fasteners Included | Mount Type | Bolt Circle Dia. (Mounting Hole Pattern Compatibility) | Bolt Hole Thread Size | Mounting Fasteners Included | Lg., mm | OD, mm | Max. Load Cap. | Includes | For Robot Arm Mfr. (Series/Model No.) | Each | ||
| Threaded | 3/8 | Female | No | Bolt On | 31.5 mm (ISO 31.5) 40 mm (ISO 40) 50 mm (ISO 50) 63 mm (ISO 63) | M5 M6 M6 | Yes | 25.4 | 80 | 110 lb. 50 kg | — | ABB (IRB 360 6/1600, 8/1130; IRB 120; IRB 140; IRB 1200; IRB 1410; IRB 1520ID; IRB 1600; IRB 2400; IRB 2600) FANUC (CR 4iA, 7iA; CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA; LR Mate 200iD/7L; M-20 iA) KUKA Robotics (KR 10 R1100-2) Omron (TM 5, 12, 14) Precise Automation (PAVP6; PF3400; PP100) Productive Robotics (OB7) Staubli (TX2 90) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S; HC 10T; SIA 10D, 10F) | 00000000 | 0000000 | |
| Threaded | 3/8 | Female | Yes | Bolt On | 31.5 mm (ISO 31.5) 40 mm (ISO 40) 50 mm (ISO 50) 63 mm (ISO 63) | M5 M6 M6 | Yes | 25.4 | 80 | 110 lb. 50 kg | Universal 1/4 Male Thread Adapter | ABB (IRB 360 6/1600, 8/1130; IRB 120; IRB 140; IRB 1200; IRB 1410; IRB 1520ID; IRB 1600; IRB 2400; IRB 2600) FANUC (CR 4iA, 7iA; CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA; LR Mate 200iD/7L; M-20 iA) KUKA Robotics (KR 10 R1100-2) Omron (TM 5, 12, 14) Precise Automation (PAVP6; PF3400; PP100) Productive Robotics (OB7) Staubli (TX2 90) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S; HC 10T; SIA 10D, 10F) | 00000000 | 000000 | |
| Threaded | 3/8 | Female | Yes | Bolt On | 31.5 mm (ISO 31.5) 40 mm (ISO 40) 50 mm (ISO 50) 63 mm (ISO 63) | M5 M6 M6 | Yes | 25.4 | 80 | 110 lb. 50 kg | Universal 1/8 Male Thread Adapter | ABB (IRB 360 6/1600, 8/1130; IRB 120; IRB 140; IRB 1200; IRB 1410; IRB 1520ID; IRB 1600; IRB 2400; IRB 2600) FANUC (CR 4iA, 7iA; CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA; LR Mate 200iD/7L; M-20 iA) KUKA Robotics (KR 10 R1100-2) Omron (TM 5, 12, 14) Precise Automation (PAVP6; PF3400; PP100) Productive Robotics (OB7) Staubli (TX2 90) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S; HC 10T; SIA 10D, 10F) | 00000000 | 000000 | |
Robot Tool Mounts for Two Tools
 |  |
(Each component sold separately) |
End-of-Robot-Arm Tool Mounts
 |  |
Black Anodized Aluminum Bolt On | Black Anodized Aluminum Blank Mount |
 |
Anodized Aluminum—These mounts are made of anodized aluminum, so they’re corrosion resistant, lightweight, and machinable. The lightness helps you keep robot arms under their payload, or weight limit, and the machinability means you can drill your own holes.
Bolt On—Bolt-on mounts have a standard ISO mounting pattern—choose one that matches the mounting pattern of your robot arm and tools. If you don't see your robot model number listed, measure the bolt circle diameter to determine mounting compatibility.
Blank Mount—Blank mounts don’t have drilled holes. Machine your own holes for compatibility with unusual mounting patterns. These mounts don’t come with installation hardware.
Mounting Plate, mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mount Type | Bolt Circle Dia. (Mounting Hole Pattern Compatibility) | Mounting Fasteners Included | Dia. | Wd. | Max. Load Cap. | Wt. | For Robot Arm Mfr. (Series/Model No.) | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Black Anodized Aluminum | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bolt On | 31.5 mm (ISO 31.5) 40 mm (ISO 40) 50 mm (ISO 50) 63 mm (ISO 63) | Yes | 80 | 128 | 110 lb. 50 kg | 0.56 lb. 0.25 kg | ABB (IRB 360 6/1600, 8/1130; IRB 120; IRB 140; IRB 1200; IRB 1410; IRB 1520ID; IRB 1600; IRB 2400; IRB 2600) FANUC (CR 4iA, 7iA; CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA; LR Mate 200iD/7L; M-20 iA) KUKA Robotics (KR 10 R1100-2) Omron (TM 5, 12, 14) Precise Automation (PAVP6; PF3400; PP100) Productive Robotics (OB7) Staubli (TX2 90) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S; HC 10T; SIA 10D, 10F) | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Blank | — | Yes | 80 | 128 | 110 lb. 50 kg | 0.58 lb. 0.26 kg | — | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Robot Tool Mounts
 |  | |
Black Anodized Aluminum Bolt On | Black Anodized Aluminum Blank Mount |
Anodized Aluminum—These mounts are made of anodized aluminum, so they’re corrosion resistant, lightweight, and machinable. The lightness helps you keep robot arms under their payload, or weight limit, and the machinability means you can drill your own holes.
Bolt On—Bolt-on mounts have a standard ISO mounting pattern—choose one that matches the mounting pattern of your robot arm and tools. If you don't see your robot model number listed, measure the bolt circle diameter to determine mounting compatibility.
Blank Mount—Blank mounts don’t have drilled holes. Machine your own holes for compatibility with unusual mounting patterns. These mounts don’t come with installation hardware.
Mount Type | Bolt Circle Dia. (Mounting Hole Pattern Compatibility) | Mounting Fasteners Included | Bolt Hole Thread Size (No. of) | Mounting Plate Dia., mm | Max. Load Cap. | Wt. | For Robot Arm Mfr. (Series/Model No.) | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Black Anodized Aluminum | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bolt On | 31.5 mm (ISO 31.5) | No | M5 × 0.8 mm (4) | 40 | 110 lb. 50 kg | 0.14 lb. 0.06 kg | ABB (IRB 120; IRB 1200) FANUC (CR 4iA, 7iA; LR Mate 200iD/7L) KUKA Robotics (KR 10 R1100-2) Precise Automation (PAVP6; PF3400) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bolt On | 40 mm (ISO 40) | No | M6 × 1 mm (4) | 50 | 110 lb. 50 kg | 0.16 lb. 0.07 kg | ABB (IRB 360 6/1600, 8/1130; IRB 140; IRB 1410; IRB 1600) FANUC (M-20 iA) Precise Automation (PP100) | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bolt On | 50 mm (ISO 50) | No | M6 × 1 mm (4) | — | 110 lb. 50 kg | 0.18 lb. 0.08 kg | ABB (IRB 2400; IRB 2600) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Omron (TM 5, 12, 14) Staubli (TX2 90) Productive Robotics (OB7) | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bolt On | 63 mm (ISO 63) | No | M6 × 1 mm (4) | — | 110 lb. 50 kg | 0.31 lb. 0.14 kg | ABB (IRB 1520ID) Yaskawa Motoman (HC 10T; SIA 10D, 10F) | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Blank | — | No | — | — | 110 lb. 50 kg | 0.36 lb. 0.16 kg | — | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Long-Reach Robot Tool Mounts
 |
 |  |
Black Anodized Aluminum | Black Acetal |
|
Extend the reach of your robot arm, so it can access the full width of a conveyor or the bottom of deep containers. These mounts use standard ISO mounting patterns, so they’re compatible with most robot arms and tools, such as those made by Universal Robots (UR) and FANUC. Select a long-reach mount with an ISO mounting pattern that matches your arm and tool, or use alterative robot tool mounts (sold separately) to adapt to a different pattern. They include mounting hardware to connect them to your robot arm, but don’t have hardware to connect to tools. If you don't see your robot model number listed, measure the bolt circle diameter to determine mounting compatibility.
These mounts are lightweight, corrosion resistant, and strong. They’re also machinable, so you can modify them to mount to custom patterns.
Anodized Aluminum—Anodized aluminum is heavier and more rigid than acetal. It’s used for longer mounts, since it’s stiff enough to keep your tool from wobbling as the arm moves.
Acetal—Acetal is lighter and less rigid than aluminum, so it’s used for shorter mounts.
End of Robot Arm Mounting Location | Robot Tool | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., mm | OD, mm | Max. Load Cap. | Wt. | Mount Type | Bolt Circle Dia. (Mounting Hole Pattern Compatibility) | Mounting Fasteners Included | Mount Type | Bolt Circle Dia. (Mounting Hole Pattern Compatibility) | Bolt Hole Thread Size (No. of) | Mounting Fasteners Included | For Robot Arm Mfr. (Series/Model No.) | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Black Anodized Aluminum | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 100 | 50 | 110 lb. 50 kg | 0.31 lb. 0.14 kg | Bolt On | 40 mm (ISO 40) | Yes | Bolt On | 40 mm (ISO 40) | M6 × 1 mm (4) | No | ABB (IRB 360 6/1600, 8/1130; IRB 140; IRB 1410; IRB 1600) FANUC (M-20 iA) Precise Automation (PP100) | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 100 | 63 | 110 lb. 50 kg | 0.27 lb. 0.12 kg | Bolt On | 50 mm (ISO 50) | Yes | Bolt On | 50 mm (ISO 50) | M6 × 1 mm (4) | No | ABB (IRB 2400; IRB 2600) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Omron (TM 5, 12, 14) Staubli (TX2 90) Productive Robotics (OB7) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 150 | 50 | 110 lb. 50 kg | 0.38 lb. 0.17 kg | Bolt On | 40 mm (ISO 40) | Yes | Bolt On | 40 mm (ISO 40) | M6 × 1 mm (4) | No | ABB (IRB 360 6/1600, 8/1130; IRB 140; IRB 1410; IRB 1600) FANUC (M-20 iA) Precise Automation (PP100) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 150 | 63 | 110 lb. 50 kg | 0.31 lb. 0.14 kg | Bolt On | 50 mm (ISO 50) | Yes | Bolt On | 50 mm (ISO 50) | M6 × 1 mm (4) | No | ABB (IRB 2400; IRB 2600) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Omron (TM 5, 12, 14) Staubli (TX2 90) Productive Robotics (OB7) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Black Acetal | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 25 | 40 | 110 lb. 50 kg | 0.09 lb. 0.04 kg | Bolt On | 31.5 mm (ISO 31.5) | Yes | Bolt On | 31.5 mm (ISO 31.5) | M5 × 0.8 mm (4) | No | ABB (IRB 120; IRB 1200) FANUC (CR 4iA, 7iA; LR Mate 200iD/7L) KUKA Robotics (KR 10 R1100-2) Precise Automation (PAVP6; PF3400) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S) | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 25 | 50 | 110 lb. 50 kg | 0.13 lb. 0.06 kg | Bolt On | 40 mm (ISO 40) | Yes | Bolt On | 40 mm (ISO 40) | M6 × 1 mm (4) | No | ABB (IRB 360 6/1600, 8/1130; IRB 140; IRB 1410; IRB 1600) FANUC (M-20 iA) Precise Automation (PP100) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 25 | 63 | 110 lb. 50 kg | 0.25 lb. 0.11 kg | Bolt On | 50 mm (ISO 50) | Yes | Bolt On | 50 mm (ISO 50) | M6 × 1 mm (4) | No | ABB (IRB 2400; IRB 2600) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Omron (TM 5, 12, 14) Staubli (TX2 90) Productive Robotics (OB7) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 35 | 40 | 110 lb. 50 kg | 0.09 lb. 0.04 kg | Bolt On | 31.5 mm (ISO 31.5) | Yes | Bolt On | 31.5 mm (ISO 31.5) | M5 × 0.8 mm (4) | No | ABB (IRB 120; IRB 1200) FANUC (CR 4iA, 7iA; LR Mate 200iD/7L) KUKA Robotics (KR 10 R1100-2) Precise Automation (PAVP6; PF3400) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S) | 000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 35 | 50 | 110 lb. 50 kg | 0.11 lb. 0.05 kg | Bolt On | 40 mm (ISO 40) | Yes | Bolt On | 40 mm (ISO 40) | M6 × 1 mm (4) | No | ABB (IRB 360 6/1600, 8/1130; IRB 140; IRB 1410; IRB 1600) FANUC (M-20 iA) Precise Automation (PP100) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 35 | 63 | 110 lb. 50 kg | 0.18 lb. 0.08 kg | Bolt On | 50 mm (ISO 50) | Yes | Bolt On | 50 mm (ISO 50) | M6 × 1 mm (4) | No | ABB (IRB 2400; IRB 2600) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Omron (TM 5, 12, 14) Staubli (TX2 90) Productive Robotics (OB7) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 50 | 40 | 110 lb. 50 kg | 0.09 lb. 0.04 kg | Bolt On | 31.5 mm (ISO 31.5) | Yes | Bolt On | 31.5 mm (ISO 31.5) | M5 × 0.8 mm (4) | No | ABB (IRB 120; IRB 1200) FANUC (CR 4iA, 7iA; LR Mate 200iD/7L) KUKA Robotics (KR 10 R1100-2) Precise Automation (PAVP6; PF3400) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 50 | 50 | 110 lb. 50 kg | 0.13 lb. 0.06 kg | Bolt On | 40 mm (ISO 40) | Yes | Bolt On | 40 mm (ISO 40) | M6 × 1 mm (4) | No | ABB (IRB 360 6/1600, 8/1130; IRB 140; IRB 1410; IRB 1600) FANUC (M-20 iA) Precise Automation (PP100) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 50 | 63 | 110 lb. 50 kg | 0.2 lb. 0.09 kg | Bolt On | 50 mm (ISO 50) | Yes | Bolt On | 50 mm (ISO 50) | M6 × 1 mm (4) | No | ABB (IRB 2400; IRB 2600) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Omron (TM 5, 12, 14) Staubli (TX2 90) Productive Robotics (OB7) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 75 | 40 | 110 lb. 50 kg | 0.11 lb. 0.05 kg | Bolt On | 31.5 mm (ISO 31.5) | Yes | Bolt On | 31.5 mm (ISO 31.5) | M5 × 0.8 mm (4) | No | ABB (IRB 120; IRB 1200) FANUC (CR 4iA, 7iA; LR Mate 200iD/7L) KUKA Robotics (KR 10 R1100-2) Precise Automation (PAVP6; PF3400) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 75 | 50 | 110 lb. 50 kg | 0.13 lb. 0.06 kg | Bolt On | 40 mm (ISO 40) | Yes | Bolt On | 40 mm (ISO 40) | M6 × 1 mm (4) | No | ABB (IRB 360 6/1600, 8/1130; IRB 140; IRB 1410; IRB 1600) FANUC (M-20 iA) Precise Automation (PP100) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 75 | 63 | 110 lb. 50 kg | 0.25 lb. 0.11 kg | Bolt On | 50 mm (ISO 50) | Yes | Bolt On | 50 mm (ISO 50) | M6 × 1 mm (4) | No | ABB (IRB 2400; IRB 2600) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) Omron (TM 5, 12, 14) Staubli (TX2 90) Productive Robotics (OB7) | 000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 100 | 40 | 110 lb. 50 kg | 0.22 lb. 0.1 kg | Bolt On | 31.5 mm (ISO 31.5) | Yes | Bolt On | 31.5 mm (ISO 31.5) | M5 × 0.8 mm (4) | No | ABB (IRB 120; IRB 1200) FANUC (CR 4iA, 7iA; LR Mate 200iD/7L) KUKA Robotics (KR 10 R1100-2) Precise Automation (PAVP6; PF3400) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 150 | 40 | 110 lb. 50 kg | 0.29 lb. 0.13 kg | Bolt On | 31.5 mm (ISO 31.5) | Yes | Bolt On | 31.5 mm (ISO 31.5) | M5 × 0.8 mm (4) | No | ABB (IRB 120; IRB 1200) FANUC (CR 4iA, 7iA; LR Mate 200iD/7L) KUKA Robotics (KR 10 R1100-2) Precise Automation (PAVP6; PF3400) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S) | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
