Made of rigid plastic, these caps are more wear resistant than vinyl caps but not as flexible.

More durable than plastic caps, these provide the most protection from abrasion and impact.

Slide these caps over a tool handle or other round object and use the eye to hang it.

Commonly used on shipping tubes, these caps have a square head to prevent round objects from rolling during shipping and storage.

These caps have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing.

Keep equipment safe from electrical currents with these caps that have a surface resistivity of less than 10¹² ohms.

Slide these flexible vinyl caps onto rectangular objects and they conform for a snug fit.

Keep tapered caps of various sizes on hand to solve whatever problems arise. These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Place these flexible vinyl caps over the ends of your angle iron and they conform for a snug fit.

These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Made of rigid plastic, these caps provide more wear resistance to the ends of angle iron than vinyl caps but are not as flexible.

Squeeze the dome top to remove these caps. They're commonly used as thread protectors.

Protect externally threaded components from contaminants during fabrication and storage.

A vibrant yellow color makes these caps stand out. They are made of flexible rubber that conforms for a snug fit. Pull the tab for easy removal.

Tug on the pull tabs to stretch these caps onto the tips of bottles, beakers, flasks, and cylinders, creating an airtight seal.

Give open-ended standoffs a finished look and protect them from dirt and debris.

To conceal and protect the entire screw head, insert your screw through the hole in the base and snap on the top.

Snap these caps into flange bolt holes to safeguard pipe flanges during shipping, storing, and finishing applications. They all have a thick center pad to protect the flange opening and pipe threads from damage.

Stretch these caps over flared edges such as flanged tubing and valve handles.

These thick, rigid bellows provide excellent durability.

Made of FDA listed materials, these rigid bellows are suitable for food and beverage applications.

Suitable for tight spaces, these highly compressible bellows have sealed seams to keep contaminants out.

Made of Kevlar, these are the most durable breathable round bellows with flange ends. They also protect against sparks and weld spatter.

No need to disassemble equipment—these bellows wrap around moving parts. Sewn seams let them breathe, so they retract quickly in fast-cycling applications.

Attach the cuff end with a hose clamp and screw mount the flange end.

Attach the cuff end with a hose clamp, and screw mount the flange end.

Secure the cuff ends with hose clamps.

Slide these bellows over flat moving surfaces on machinery, such as guideways.

Similar to a window shade, pull these covers out to protect surfaces and equipment in tight spaces.

Also known as lift table skirts, these bellows cover the working parts at the base of a lift table.

Guard 9" and 12" travel Bridgeport milling machines by covering their rear knee/upper column and front knee.

Slip these bellows over hydraulic cylinder rods to keep them free from debris for a long service life.

Protect U-joints to keep lubricants in and contaminants out.

Slide or zip these protectors around shocks and other moving parts to keep debris out of their seals.

When you can't drill a through hole, use one of these flanged receptacles to provide a permanent, blind hole for a quick-release pin.

Use these retaining caps to secure the ends of quick-release pins in holes that are oversized or out of round.

These tubes have one sealed end and one end that closes with a cap.

Close these tubes with a cap on each end.

Slide the 6" long cap onto one end; the other end has a permanent steel cap.

These tubes are easier to label and stack than round tubes. To adjust the length, push the ends of the tube together or pull them apart.

Shield shafts and threaded parts from abrasion and chipping.

Extend the life of your rigid shaft couplings by blocking out dirt, water, lubricants, and other contaminants. These two-piece covers twist together to form a shell around the coupling.

Attach these fittings to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

Use these CGA fittings to connect welding hose to pressure regulators and torches.

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system. Use in high-pressure applications up to 6,000 psi

Use these dust caps and plugs to keep contaminants out of your hose line.

Use these dust caps and plugs to keep contaminants out of your hose line.

Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

To keep contaminants out of your gas line, add these dust caps and plugs to natural and LP gas couplings when they’re not connected. All work with couplings that are rated ANSI Z21.41/CSA 6.9 for use with gas fuel appliances.