For Cutting For Cutting |
|---|
|
For Use On For Use On |
|---|
|
For Maximum Soft Steel Diameter For Maximum SoftSteel Diameter |
|---|
|
|
For Maximum Medium-Hard Steel Diameter For Maximum Medium-Hard Steel Diameter |
|---|
|
|
For Maximum Soft Steel Hardness For Maximum SoftSteel Hardness |
|---|
|
For Maximum Hard Steel Hardness For Maximum HardSteel Hardness |
|---|
|
For Maximum Medium-Hard Steel Hardness For Maximum Medium-Hard Steel Hardness |
|---|
|
For Maximum Rebar Hardness For MaximumRebar Hardness |
|---|
|
Bench-Mount Threaded Rod Cutters
An alternative to hacksaws and bandsaws, these cutters use leverage to cut rods cleanly in a single stroke. One blade mounts in the base, the other to the movable jaw. They have an adjustable length gauge for cutting duplicate lengths.
Threaded Rod Cutters
Cut rods and bolts while leaving their threads intact.
Battery-Powered Threaded Rod Cutters
Make clean cuts on threaded rod with the pull of a trigger. These battery-powered cutters require less time and exertion than manual threaded rod cutters and hacksaws, so they’re good for construction and other jobs with lots of cuts; a single battery charge cuts about 350 rods. Since you’re not tethered to an outlet, you can cut rod that’s already installed.
Unlike tools that cut with a fast-moving blade, such as circular saws, these cutters have a die that cuts smoothly and leaves no burrs. These dies won’t bind and seize or send sparks and chips flying. To switch between threaded rod sizes, just rotate the cutting die.
| For Use On | For Thread Size | For Rod Dia. | Overall Lg. | Blade Material | Handle Material | Voltage | Batteries Included | Includes | Features | Each | |
| Aluminum, Brass, Stainless Steel, Steel | 1/4"-20, 3/8"-16 | 1/4", 3/8" | 14 1/4" | Steel | Plastic | 20V DC | Yes | Carrying Bag, Wrench | LED Light | 0000000 | 0000000 |
Bolt and Chain Cutters
Cut medium steel chain and hard steel bolts, rods, screws, rivets, nails, bars, wire, and rebar. All cutters have an adjustment screw to align cutting edges. For more leverage, choose a cutter with a longer handle. Not for use on wire rope.
Cutters | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Dia. | Replacement Cutting Heads | |||||||||||
| Soft Steel | Medium-Hard Steel | Hard Steel | Rebar | Overall Lg. | Jaw Material | Handle Material | Grip Material | Opening Style | Each | Each | ||
| 5/16" | 5/16" | 3/16" | 3/16" | 14" | Steel | Steel | Rubber | Manual | 0000000 | 0000000 | 0000000 | 000000 |
| 3/8" | 3/8" | 1/4" | 1/4" | 18" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 00000 |
| 7/16" | 7/16" | 5/16" | 5/16" | 24" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 00000 |
| 1/2" | 1/2" | 3/8" | 3/8" | 30" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 000000 |
| 9/16" | 9/16" | 7/16" | 7/16" | 36" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 000000 |
| 11/16" | 11/16" | 1/2" | __ | 42" | Steel | Steel | Rubber | Manual | 000000 | 000000 | 000000 | 000000 |
Bolt and Hard Chain Cutters
Cut hard bolts and up to Grade 70 chain with reinforced blades that stay aligned during repeat cuts. All cutters have an adjustment screw to align cutting edges. For more leverage, choose a cutter with a longer handle. Not for use on wire rope.
Cutters | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Dia. | Replacement Cutting Heads | ||||||||||||
| Soft Steel | Medium-Hard Steel | Hard Steel | Rebar | Hard Chain | Overall Lg. | Jaw Material | Handle Material | Grip Material | Opening Style | Each | Each | ||
| 7/16" | 7/16" | 5/16" | 5/16" | 5/16" | 24" | Steel | Steel | Rubber | Manual | 0000000 | 0000000 | 0000000 | 0000000 |
| 1/2" | 1/2" | 3/8" | 3/8" | 3/8" | 30" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 000000 |
| 9/16" | 9/16" | 7/16" | 7/16" | 7/16" | 36" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 000000 |
Flush-Cut Bolt and Chain Cutters
Blades are flat on one side for close-to-the-surface cuts. All cutters have an adjustment screw to align cutting edges. For more leverage, choose a cutter with a longer handle. Not for use on wire rope.
Electrical-Insulating Bolt and Chain Cutters
Insulated handles protect against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use to cut medium steel chain and hard steel bolts, rods, screws, rivets, nails, bars, and wire. Cutters have an adjustment screw to align cutting edges. Not for use on wire rope.
Bolt, Hard Chain, and Padlock Cutters
With a short-nosed jaw, these cutters force the material being cut deeper into the jaw for maximum leverage. The short jaw also allows you to cut one side of a chain link or padlock hasp without hitting the other side. All cutters have an adjustment screw to align cutting edges. For more leverage, choose a cutter with a longer handle. Not for use on wire rope.
Cutters | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Dia. | Replacement Cutting Heads | ||||||||||||
| Soft Steel | Medium-Hard Steel | Hard Steel | Rebar | Hard Chain | Overall Lg. | Jaw Material | Handle Material | Grip Material | Opening Style | Each | Each | ||
| 5/16" | 5/16" | 5/16" | 5/16" | 5/16" | 24" | Steel | Steel | Rubber | Manual | 000000 | 0000000 | 000000 | 000000 |
| 7/16" | 7/16" | 7/16" | 7/16" | 7/16" | 36" | Steel | Steel | Rubber | Manual | 000000 | 000000 | 000000 | 000000 |
| 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 42" | Steel | Steel | Rubber | Manual | 000000 | 000000 | 000000 | 00 |
Bench-Mount Bolt, Hard Chain, and Padlock Cutters
Make repeated cuts in hard materials with this cutter. It mounts for stability and provides extra leverage. It has a short-nosed jaw that forces the material being cut deep into the jaw and also allows you to cut one side of a chain link or padlock hasp without hitting the other side. Align cutting edges with the adjustment screw. Not for use on wire rope.
Hydraulic-Assist Multipurpose Bolt,
Wire Rope, and Cable Cutters
Hydraulic-powered jaws cut bolts, wire rope, rods, and electrical cable with low effort and minimal material distortion. Blades can be sharpened and replaced.
Cutter rated for 20,000 volts has insulated handles.
Cutters | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Wire Rope Dia. | Replacement Cutting Blades | |||||||||||||
| Steel | Stainless Steel | For Max. Soft Steel Dia. | For Max. Steel-Reinforced Aluminum Cable Dia. | For Max. Data Cable Dia. | For Max. Rebar Dia. | Overall Lg. | Jaw Material | Handle Material | Grip Material | For Max. Voltage | Each | Each | ||
| 5/8" | 5/8" | 5/8" | 5/8" | 5/8" | 1/2" | 15" | Steel | Steel | Rubber | Not Rated | 0000000 | 000000000 | 0000000 | 0000000 |
| 3/4" | 3/4" | 11/16" | 3/4" | 3/4" | 1/2" | 15" | Steel | Steel | Rubber | 20,000 V | 0000000 | 00000000 | 0000000 | 000000 |
| 1" | 1" | 1 1/4" | 2" | 2" | 3/4" | 24" | Steel | Steel | Rubber | Not Rated | 0000000 | 00000000 | 0000000 | 000000 |
| 1 1/4" | 1 1/4" | 1 1/4" | 1 1/4" | 1 1/4" | 7/8" | 27" | Steel | Steel | Rubber | Not Rated | 0000000 | 00000000 | 0000000 | 000000 |
Rebar Benders
A long handle gives you the leverage to quickly bend metal.
Style C trims and bends rebar up to 5/8" dia. Bolt to a flat surface for added stability.
For Rebar | Mounting Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Trade Number | Dia. | No. of Heads | Max. Bending Angle | Handle Lg. | Material | Mounting Fasteners Included | No. of | Dia. | Each | |
| C | 3, 4, 5 | 3/8", 1/2", 5/8" | 1 | 180° | 52" | Steel | No | 4 | 5/8" | 0000000 | 0000000 |