Rod End Type Rod End Type | Show |
---|
![]() | Swivel Joint |
Rod End Type Rod End Type | Hide |
---|
![]() | ![]() |
Ball Joint | Bolt |
![]() | ![]() |
Clevis | Ball Joint Linkage |
![]() | |
Swivel Joint |
ID ID |
---|
OD OD |
---|
Material Material |
---|
|
Overall Thickness Overall Thickness |
---|
Ball Material Ball Material |
---|
|
Lubrication Lubrication |
---|
|
Static Radial Load Capacity Static Radial Load Capacity |
---|
|
Housing Thickness Housing Thickness |
---|
Insert Material Insert Material |
---|
|
Ball Finish Ball Finish |
---|
|
Liner Material Liner Material |
---|
|
Static Thrust Load Capacity Static Thrust Load Capacity |
---|
|
Finish Finish |
---|
|
Specifications Met Specifications Met |
---|
|
Seal Material Seal Material |
---|
|
More
Also known as spherical bearings, swivel joints support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit. Lubrication is required.
For technical drawings and 3-D models, click on a part number.
ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Material | Each | |
3/16" | 9/16" | 9/32" | 7/32" | 22° | 4,850 | Alloy Steel | 00000000 | 00000 |
1/4" | 21/32" | 11/32" | 1/4" | 27° | 7,400 | Alloy Steel | 00000000 | 0000 |
5/16" | 3/4" | 3/8" | 9/32" | 24° | 9,700 | Alloy Steel | 00000000 | 0000 |
3/8" | 13/16" | 13/32" | 5/16" | 20° | 12,600 | Alloy Steel | 00000000 | 0000 |
7/16" | 29/32" | 7/16" | 11/32" | 16° | 14,150 | Alloy Steel | 00000000 | 0000 |
1/2" | 1" | 1/2" | 25/64" | 19° | 19,850 | Alloy Steel | 00000000 | 0000 |
9/16" | 1 3/32" | 9/16" | 7/16" | 19° | 24,900 | Alloy Steel | 00000000 | 0000 |
5/8" | 1 3/16" | 5/8" | 1/2" | 17° | 31,900 | Alloy Steel | 00000000 | 0000 |
3/4" | 1 7/16" | 3/4" | 19/32" | 18° | 47,850 | Alloy Steel | 00000000 | 00000 |
7/8" | 1 9/16" | 7/8" | 45/64" | 19° | 62,900 | Alloy Steel | 00000000 | 00000 |
1" | 1 3/4" | 1" | 51/64" | 20° | 82,800 | Alloy Steel | 00000000 | 00000 |
1" | 2" | 1" | 25/32" | 18° | 106,200 | Alloy Steel | 00000000 | 00000 |
1 1/4" | 2 3/8" | 1 3/16" | 15/16" | 17° | 151,050 | Alloy Steel | 00000000 | 00000 |
1 1/2" | 2 3/4" | 1 3/8" | 1 3/32" | 17° | 203,900 | Alloy Steel | 00000000 | 00000 |
2" | 3 1/2" | 1 3/4" | 1 3/8" | 17° | 325,550 | Alloy Steel | 00000000 | 000000 |
5mm | 16mm | 8mm | 6mm | 12° | 6,150 | Alloy Steel | 0000000 | 0000 |
6mm | 18mm | 9mm | 7mm | 25° | 7,950 | Alloy Steel | 0000000 | 0000 |
8mm | 22mm | 12mm | 9mm | 28° | 13,250 | Alloy Steel | 0000000 | 00000 |
10mm | 26mm | 14mm | 11mm | 27° | 18,600 | Alloy Steel | 0000000 | 00000 |
12mm | 30mm | 16mm | 12mm | 26° | 25,350 | Alloy Steel | 0000000 | 00000 |
14mm | 34mm | 19mm | 14mm | 32° | 31,850 | Alloy Steel | 0000000 | 00000 |
16mm | 38mm | 21mm | 15mm | 30° | 39,850 | Alloy Steel | 0000000 | 00000 |
18mm | 42mm | 23mm | 17mm | 15° | 48,700 | Alloy Steel | 0000000 | 00000 |
20mm | 46mm | 25mm | 18mm | 14° | 58,450 | Alloy Steel | 0000000 | 00000 |
22mm | 50mm | 28mm | 20mm | 15° | 70,850 | Alloy Steel | 0000000 | 00000 |
25mm | 56mm | 31mm | 22mm | 15° | 87,650 | Alloy Steel | 0000000 | 00000 |
30mm | 66mm | 37mm | 25mm | 17° | 118,100 | Alloy Steel | 0000000 | 00000 |
A slippery PTFE liner reduces friction without the oily mess. Also known as spherical bearings, they support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.
For technical drawings and 3-D models, click on a part number.
ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Each | |
3/16" | 9/16" | 9/32" | 7/32" | 22° | 4,850 | -65° to 275° | Alloy Steel | 00000000 | 000000 |
1/4" | 21/32" | 11/32" | 1/4" | 27° | 7,400 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
5/16" | 3/4" | 3/8" | 9/32" | 24° | 9,700 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
3/8" | 13/16" | 13/32" | 5/16" | 20° | 12,600 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
7/16" | 29/32" | 7/16" | 11/32" | 16° | 14,150 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
1/2" | 1" | 1/2" | 25/64" | 19° | 19,850 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
1/2" | 1" | 5/8" | 25/64" | 19° | 18,950 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
9/16" | 1 3/32" | 9/16" | 7/16" | 19° | 24,900 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
5/8" | 1 3/16" | 5/8" | 1/2" | 17° | 31,900 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
3/4" | 1 7/16" | 3/4" | 19/32" | 18° | 47,850 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
7/8" | 1 9/16" | 7/8" | 45/64" | 19° | 62,900 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
1" | 1 3/4" | 1" | 51/64" | 20° | 82,800 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
1" | 2" | 1" | 25/32" | 18° | 106,200 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
1 1/4" | 2 3/8" | 1 3/16" | 15/16" | 17° | 151,050 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
1 1/2" | 2 3/4" | 1 3/8" | 1 3/32" | 17° | 203,900 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
2" | 3 1/2" | 1 3/4" | 1 3/8" | 17° | 325,550 | -65° to 275° | Alloy Steel | 00000000 | 000000 |
6mm | 18mm | 9mm | 7mm | 25° | 7,950 | -30° to 300° | Zinc-Plated Alloy Steel | 0000000 | 00000 |
8mm | 22mm | 12mm | 9mm | 28° | 13,250 | -30° to 300° | Zinc-Plated Alloy Steel | 0000000 | 00000 |
10mm | 26mm | 14mm | 11mm | 27° | 18,600 | -30° to 300° | Zinc-Plated Alloy Steel | 0000000 | 00000 |
12mm | 30mm | 16mm | 12mm | 26° | 25,350 | -30° to 300° | Zinc-Plated Alloy Steel | 0000000 | 00000 |
14mm | 34mm | 19mm | 14mm | 32° | 31,850 | -30° to 300° | Zinc-Plated Alloy Steel | 0000000 | 00000 |
16mm | 38mm | 21mm | 15mm | 30° | 39,850 | -30° to 300° | Zinc-Plated Alloy Steel | 0000000 | 00000 |
18mm | 42mm | 23mm | 17mm | 30° | 48,700 | -65° to 275° | Alloy Steel | 0000000 | 00000 |
20mm | 46mm | 25mm | 18mm | 29° | 58,450 | -65° to 275° | Alloy Steel | 0000000 | 00000 |
22mm | 50mm | 28mm | 20mm | 30° | 78,850 | -65° to 275° | Alloy Steel | 0000000 | 00000 |
25mm | 56mm | 31mm | 22mm | 30° | 87,650 | -65° to 275° | Alloy Steel | 0000000 | 00000 |
30mm | 66mm | 37mm | 25mm | 34° | 118,100 | -65° to 275° | Alloy Steel | 0000000 | 00000 |
A slippery PTFE liner reduces wear and eliminates the need for lubrication. Made of stainless steel, these swivel joints are stronger than plastic models and more corrosion resistant than steel ones. Also known as spherical bearings, they support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.
For technical drawings and 3-D models, click on a part number.
ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Each | |
3/16" | 9/16" | 9/32" | 7/32" | 20° | 3,950 | -65° to 275° | 303 Stainless Steel | 00000000 | 000000 |
1/4" | 21/32" | 11/32" | 1/4" | 20° | 6,000 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
5/16" | 3/4" | 3/8" | 9/32" | 20° | 8,750 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
3/8" | 13/16" | 13/32" | 5/16" | 18° | 10,500 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
7/16" | 29/32" | 7/16" | 11/32" | 16° | 13,200 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
1/2" | 1" | 1/2" | 25/64" | 16° | 17,900 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
5/8" | 1 3/16" | 5/8" | 1/2" | 16° | 30,500 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
3/4" | 1 7/16" | 3/4" | 19/32" | 16° | 46,400 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
7/8" | 1 9/16" | 7/8" | 45/64" | 16° | 62,200 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
1" | 1 3/4" | 1" | 51/64" | 18° | 82,200 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
Stronger than plastic models, these stainless steel swivel joints are also more corrosion resistant than steel joints. Ball is heat treated for strength. Also known as spherical bearings, they support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.
For technical drawings and 3-D models, click on a part number.
ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Material | Each | |
5/32" | 15/32" | 1/4" | 3/16" | 18° | 3,200 | 303 Stainless Steel | 00000000 | 000000 |
3/16" | 9/16" | 9/32" | 7/32" | 22° | 4,400 | 303 Stainless Steel | 00000000 | 00000 |
1/4" | 21/32" | 11/32" | 1/4" | 27° | 6,700 | 303 Stainless Steel | 00000000 | 00000 |
5/16" | 3/4" | 3/8" | 9/32" | 24° | 9,200 | 303 Stainless Steel | 00000000 | 00000 |
3/8" | 13/16" | 13/32" | 5/16" | 20° | 12,400 | 303 Stainless Steel | 00000000 | 00000 |
7/16" | 29/32" | 7/16" | 11/32" | 16° | 14,900 | 303 Stainless Steel | 00000000 | 00000 |
1/2" | 1" | 1/2" | 25/64" | 19° | 17,900 | 303 Stainless Steel | 00000000 | 00000 |
9/16" | 1 3/32" | 9/16" | 7/16" | 19° | 23,700 | 303 Stainless Steel | 00000000 | 00000 |
5/8" | 1 3/16" | 5/8" | 1/2" | 17° | 32,000 | 303 Stainless Steel | 00000000 | 00000 |
3/4" | 1 7/16" | 3/4" | 19/32" | 18° | 48,000 | 303 Stainless Steel | 00000000 | 00000 |
7/8" | 1 9/16" | 7/8" | 45/64" | 19° | 69,000 | 303 Stainless Steel | 00000000 | 00000 |
1" | 1 3/4" | 1" | 51/64" | 20° | 83,000 | 303 Stainless Steel | 00000000 | 00000 |
These nylon swivel joints are 80% lighter than steel swivel joints with better corrosion resistance. Also known as spherical bearings, they support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.
For technical drawings and 3-D models, click on a part number.
ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Specifications Met | Each | |
3/16" | 9/16" | 5/16" | 7/32" | 34° | 220 | -20° to 175° | Nylon Plastic | ISO 12240-1 | 0000000 | 00000 |
1/4" | 21/32" | 3/8" | 1/4" | 30° | 330 | -20° to 175° | Nylon Plastic | ISO 12240-1 | 0000000 | 0000 |
5/16" | 3/4" | 7/16" | 9/32" | 29° | 450 | -20° to 175° | Nylon Plastic | ISO 12240-1 | 0000000 | 0000 |
3/8" | 13/16" | 1/2" | 5/16" | 25° | 620 | -20° to 175° | Nylon Plastic | ISO 12240-1 | 0000000 | 0000 |
1/2" | 1 1/16" | 5/8" | 25/64" | 25° | 950 | -20° to 175° | Nylon Plastic | ISO 12240-1 | 0000000 | 0000 |
3/4" | 1 7/16" | 7/8" | 19/32" | 23° | 1,900 | -20° to 175° | Nylon Plastic | ISO 12240-1 | 0000000 | 0000 |
Specially designed lubrication channels and integral seals allow these joints to last up to three times longer than other swivel joints. Also known as spherical bearings, they support angular misalignment. Press into a hole or housing where a ball joint rod end won’t fit. All have seals to keep grease in and contaminants out. Joints come greased and can be lubricated through a hole in the housing without removing the load.
For technical drawings and 3-D models, click on a part number.
ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Max. Temp., °F | Material | Each | |
3/4" | 1 1/4" | 21/32" | 9/16" | 14° | 21,200 | 250° | Bearing Steel | 0000000 | 000000 |
7/8" | 1 7/16" | 49/64" | 21/32" | 14° | 28,800 | 250° | Bearing Steel | 0000000 | 00000 |
1" | 1 5/8" | 7/8" | 3/4" | 14° | 37,700 | 250° | Bearing Steel | 0000000 | 00000 |
1 1/4" | 2" | 1 3/32" | 15/16" | 14° | 58,800 | 250° | Bearing Steel | 0000000 | 00000 |
1 3/8" | 2 3/16" | 1 3/16" | 1 1/32" | 14° | 69,800 | 250° | Bearing Steel | 0000000 | 00000 |
1 1/2" | 2 7/16" | 1 5/16" | 1 1/8" | 14° | 84,800 | 250° | Bearing Steel | 0000000 | 00000 |
1 3/4" | 2 13/16" | 1 17/32" | 1 5/16" | 14° | 115,400 | 250° | Bearing Steel | 0000000 | 00000 |
2" | 3 3/16" | 1 3/4" | 1 1/2" | 14° | 150,900 | 250° | Bearing Steel | 0000000 | 000000 |
2 1/2" | 3 15/16" | 2 3/16" | 1 7/8" | 14° | 235,500 | 250° | Bearing Steel | 0000000 | 000000 |
3" | 4 3/4" | 2 5/8" | 2 1/4" | 14° | 339,500 | 250° | Bearing Steel | 0000000 | 000000 |
A unique design allows these joints to support heavy one-direction thrust loads as well as combined radial/thrust loads. Also known as spherical bearings, you can press them into tight spots where a rod end shank won’t fit or mount them in a drilled hole or a rod end blank. Lubrication is required.
For technical drawings and 3-D models, click on a part number.
ID | OD | O'all Thick. | Housing Thick. | Static Radial Load Cap., lbs. | Static Thrust Load Cap., lbs. | Material | Each | |
1/2" | 7/8" | 5/16" | 3/16" | 4,000 | 5,200 | Bearing Steel | 0000000 | 000000 |
5/8" | 1 1/16" | 3/8" | 1/4" | 6,900 | 8,700 | Bearing Steel | 0000000 | 00000 |
3/4" | 1 1/4" | 7/16" | 5/16" | 10,500 | 12,600 | Bearing Steel | 0000000 | 00000 |
7/8" | 1 7/16" | 1/2" | 3/8" | 14,900 | 17,600 | Bearing Steel | 0000000 | 00000 |
1" | 1 5/8" | 5/8" | 7/16" | 19,600 | 22,200 | Bearing Steel | 0000000 | 00000 |
1 1/4" | 2" | 3/4" | 9/16" | 32,000 | 35,400 | Bearing Steel | 0000000 | 00000 |
1 3/8" | 2 3/16" | 7/8" | 5/8" | 35,900 | 42,900 | Bearing Steel | 0000000 | 00000 |
1 1/2" | 2 7/16" | 15/16" | 5/8" | 44,500 | 51,900 | Bearing Steel | 0000000 | 00000 |
1 3/4" | 2 13/16" | 1 1/16" | 13/16" | 61,600 | 69,300 | Bearing Steel | 0000000 | 000000 |
2" | 3 3/16" | 1 1/4" | 15/16" | 82,500 | 91,700 | Bearing Steel | 0000000 | 000000 |