System of Measurement System of Measurement |
---|
|
Shank Thread Size Shank Thread Size | Show |
---|
|
Shank Thread Size Shank Thread Size | Hide |
---|
Shank Threading Shank Threading |
---|
|
Rod End Type Rod End Type |
---|
![]() | Bolt |
Material Material |
---|
|
Shank Thread Direction Shank Thread Direction |
---|
|
Shank Gender Shank Gender |
---|
![]() | Male |
Shank Thread Pitch Shank Thread Pitch |
---|
|
Tensile Strength Tensile Strength |
---|
|
Specifications Met Specifications Met |
---|
|
Finish Finish |
---|
|
More
These rod end bolts are good for wet and corrosive environments—for maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.
Brass rod end bolts resist corrosion in humid and wet environments, but not as well as stainless steel bolts. They're also not as strong. Often, brass bolts are chosen for their look, or to match other components, such as hinges.
303 and 304 stainless steel rod end bolts won't rust in humid, wet, and washdown environments. They're stronger than brass bolts and nearly as strong as steel. They will rust when exposed to salt water and chemicals, however. Black-oxide 303 stainless steel rod end bolts have a matte-black finish that adds some corrosion resistance but is mostly chosen for its looks.
17-4 PH stainless steel rod end bolts have the most tensile strength—a similar amount to high-strength alloy steel. They also won’t rust in humid, wet, and washdown environments. Even at high temperatures, they maintain their excellent strength and corrosion resistance, so they’re often used in automotive drive trains and heat exchangers. However, they’ll rust when exposed to salt water and chemicals.
316 stainless steel rod end bolts are our most corrosion resistant, and they're nearly as strong as steel rod end bolts. Use them in areas with salt water, chlorine, and chemicals without worrying about rust.
ASTM rod end bolts meet a standard for material.
DIN 444 rod end bolts meet an international standard for rod end dimensions.
For technical drawings and 3-D models, click on a part number.
Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | O'all Thick. | Tensile Strength, psi | Specifications Met | Each | |
Right-Hand Threaded Shank | |||||||||
---|---|---|---|---|---|---|---|---|---|
Brass | |||||||||
M24 × 3 mm | 22mm | 45mm | 90mm | 58mm | 25mm | 50,000 | ASTM B16, DIN 444 | 00000000 | 0000000 |
M24 × 3 mm | 22mm | 45mm | 100mm | 68mm | 25mm | 50,000 | ASTM B16, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 120mm | 88mm | 25mm | 50,000 | ASTM B16, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 140mm | 108mm | 25mm | 50,000 | ASTM B16, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 150mm | 118mm | 25mm | 50,000 | ASTM B16, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 160mm | 128mm | 25mm | 50,000 | ASTM B16, DIN 444 | 00000000 | 000000 |
303 Stainless Steel | |||||||||
M24 × 3 mm | 22mm | 45mm | 90mm | 58mm | 25mm | 90,000 | ASTM A582, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 100mm | 68mm | 25mm | 90,000 | ASTM A582, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 120mm | 88mm | 25mm | 90,000 | ASTM A582, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 140mm | 108mm | 25mm | 90,000 | ASTM A582, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 150mm | 118mm | 25mm | 90,000 | ASTM A582, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 160mm | 128mm | 25mm | 90,000 | ASTM A582, DIN 444 | 00000000 | 000000 |
Black-Oxide 303 Stainless Steel | |||||||||
M24 × 3 mm | 22mm | 45mm | 90mm | 58mm | 25mm | 90,000 | ASTM A582, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 100mm | 68mm | 25mm | 90,000 | ASTM A582, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 120mm | 88mm | 25mm | 90,000 | ASTM A582, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 140mm | 108mm | 25mm | 90,000 | ASTM A582, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 150mm | 118mm | 25mm | 90,000 | ASTM A582, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 160mm | 128mm | 25mm | 90,000 | ASTM A582, DIN 444 | 00000000 | 000000 |
17-4 PH Stainless Steel | |||||||||
M24 × 3 mm | 22mm | 45mm | 90mm | 58mm | 25mm | 160,000 | ASTM A564, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 100mm | 68mm | 25mm | 160,000 | ASTM A564, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 120mm | 88mm | 25mm | 160,000 | ASTM A564, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 140mm | 108mm | 25mm | 160,000 | ASTM A564, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 150mm | 118mm | 25mm | 160,000 | ASTM A564, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 160mm | 128mm | 25mm | 160,000 | ASTM A564, DIN 444 | 00000000 | 000000 |
316 Stainless Steel | |||||||||
M24 × 3 mm | 22mm | 45mm | 90mm | 58mm | 25mm | 75,000 | ASTM A276, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 100mm | 68mm | 25mm | 75,000 | ASTM A276, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 120mm | 88mm | 25mm | 75,000 | ASTM A276, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 140mm | 108mm | 25mm | 75,000 | ASTM A276, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 150mm | 118mm | 25mm | 75,000 | ASTM A276, DIN 444 | 00000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 160mm | 128mm | 25mm | 75,000 | ASTM A276, DIN 444 | 00000000 | 000000 |
For maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.
For technical drawings and 3-D models, click on a part number.
Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | O'all Thick. | Tensile Strength, psi | Specifications Met | Material | Each | |
Right-Hand Threaded Shank | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
M24 × 3 mm | 22mm | 45mm | 160mm | 120mm | 25mm | Not Rated | DIN 444 | Black-Oxide Carbon Steel | 0000000 | 000000 |
M24 × 3 mm | 22mm | 45mm | 240mm | 200mm | 25mm | Not Rated | DIN 444 | Black-Oxide Carbon Steel | 0000000 | 00000 |