Compare over 50 grades of steel and cast iron to find the right material for you—all with material certificates for traceability.
Selecting Compatible Lead Screws and Nuts
More
Hardened Undersized High-Speed M2 Tool Steel Rods

- Yield Strength: See table
- Hardness: Rockwell C60 (Very Hard)
These rods, also known as drill blanks, have an undersized diameter for machining your own drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
Dia. | Dia. Tolerance | Drill Bit Size | Lg. | Yield Strength | Mechanical Finish | Straightness Tolerance | Each | |
0.228" | -0.0002" to 0" | 1 | 3 7/8" | Not Rated | Precision Ground | 0.012" per ft. | 00000000 | 00000 |
Hardened Oversized High-Speed M2 Tool Steel Rods

- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
Also known as reamer blanks, these rods have an oversized diameter that allows for finishing to your exact requirements. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Dia. | Dia. Tolerance | Reamer Size | Lg. | Lg. Tolerance | Mechanical Finish | Straightness Tolerance | Each | |
0.228" | 0" to 0.0002" | 1 | 3 7/8" | -1/32" to 1/32" | Precision Ground | 0.012" per ft. | 00000000 | 00000 |
Tight-Tolerance Multipurpose Oil-Hardening O1 Tool Steel Rods

- Yield Strength: 50,000 psi
- Hardness: Rockwell B90 (Medium)
- Heat Treatable: Yes
- Maximum Hardness After Heat Treatment: Rockwell C65
- Fabrication: Hot Rolled
- Specifications Met: ASTM A681
Ready for turning in a lathe, these rods are precision ground to a tight diameter tolerance. They’re also known as drill rod. Often used for dies, punches, and gauges, O1 tool steel is an oil-hardening material that resists wear and abrasion. It can also be surface hardened with heat treating for added wear resistance. These rods have been manufactured to meet ASTM A681 standards for performance and quality.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
6 ft. Lg. | |||||
---|---|---|---|---|---|
Dia. | Dia. Tolerance | Heat Treatment | Mechanical Finish | Each | |
0.228" | -0.0005" to 0.0005" | Annealed (Softened) | Precision Ground | 00000000 | 000000 |
Metric Fast-Travel Ultra-Precision Lead Screws and Nuts
Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start. Operating with less backlash (play) than Metric Precision Acme Lead Screws and Nuts, these lead screws and nuts provide increased nut life and more reliable movement in automated systems. To ensure compatibility, select components that have the same thread size, thread pitch, and number of thread starts.
Flange nuts with a wear-compensating internal O-ring resist backlash to keep the nuts in place and maintain a tight fit even when their threads begin to wear. They’re often used in 3D printing and robotic applications.
Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.


Flange | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | Lg. | Dia. | Wd. | Ht. | Thick. | No. of Thread Starts | Thread Type | Speed Ratio | Travel Distance per Turn, mm | Bolt Circle Dia. | Dynamic Thrust Load Cap., lbs. | Each | ||
PEEK Plastic with Wear-Compensating Internal O-Ring | |||||||||||||||
D | M2 | 0.4 | 5/16" | 0.228" | 15/32" | 15/64" | 5/64" | 2 | Metric Rounded Trapezoidal | 2:1 | 0.75 | 11/32" | 1 | 00000000 | 000000 |
D | M2 | 0.4 | 5/16" | 0.228" | 15/32" | 15/64" | 5/64" | 4 | Metric Rounded Trapezoidal | 4:1 | 1.5 | 11/32" | 1 | 00000000 | 00000 |
D | M2 | 0.4 | 5/16" | 0.228" | 15/32" | 15/64" | 5/64" | 8 | Metric Rounded Trapezoidal | 8:1 | 3 | 11/32" | 1 | 00000000 | 00000 |
Metric Ultra-Precision Lead Screws and Nuts

Operating with less backlash (play) than Metric Precision Acme Lead Screws and Nuts, these provide increased nut life and more reliable movement in automated systems. Also known as single-start and self-locking lead screws and nuts, they have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest. To ensure compatibility, select components that have the same thread size, thread type, thread size, thread pitch, and number of thread starts.
Flange nuts with wear-compensating internal O-ring maintain a tight fit even when their threads begin to wear. They resist backlash to maintain accuracy over time, which is important in positioning applications such as 3D printing and robotics.
Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.


Flange | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | Lg. | Dia. | Wd. | Ht. | Thick. | No. of Thread Starts | Thread Type | Speed Ratio | Travel Distance per Turn, mm | Bolt Circle Dia. | Dynamic Thrust Load Cap., lbs. | Each | ||
PEEK Plastic with Wear-Compensating Internal O-Ring | |||||||||||||||
C | M2 | 0.4 | 5/16" | 0.228" | 15/32" | 15/64" | 5/64" | 1 | Metric Rounded Trapezoidal | 1:1 | 0.375 | 11/32" | 1 | 000000000 | 0000000 |