System of Measurement System of Measurement |
|---|
|
Diameter Diameter | Show |
|---|
|
Diameter Diameter | Hide |
|---|
Thread Size Thread Size |
|---|
|
|
Component Component |
|---|
 | Nut |
Nut Type Nut Type |
|---|
 | Flange |
Material Material |
|---|
|
Length Length |
|---|
|
Thread Direction Thread Direction |
|---|
 | Right Hand |
Dynamic Thrust Load Capacity Dynamic ThrustLoad Capacity |
|---|
|
Number of Mounting Holes Number of Mounting Holes |
|---|
|
Mounting Hole Diameter Mounting Hole Diameter |
|---|
|
Flange Hardness Flange Hardness |
|---|
|
Flange Height Flange Height |
|---|
|
Flange Width Flange Width |
|---|
|
Hardness Hardness |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Mounting Hole Center-to-Center Mounting HoleCenter-to-Center |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
Flange Thickness Flange Thickness |
|---|
|
Selecting Compatible Lead Screws and Nuts
More
Ultra-Precision Lead Screws and Nuts
Operating with less backlash (play) than Precision Acme Lead Screws and Nuts, these provide increased nut life and more reliable movement in automated systems. Also known as single-start and self-locking lead screws and nuts, they have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won’t unexpectedly move when the lead screw is at rest. All components are corrosion resistant for use in harsh environments. To ensure compatibility, select components that have the same thread size.
Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
For technical drawings and 3-D models, click on a part number.
Flange nuts with wear-compensating internal O-ring or wear-compensating spring maintain a tight fit even when their threads begin to wear.
Flange | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Dia. | Wd. | Ht. | Thick. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Mounting Hole Ctr.-to-Ctr. | Tensile Strength, psi | Dynamic Thrust Load Cap., lbs. | Each | ||
Acetal Plastic | ||||||||||||||
| A | 9/64"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 1 | 1:1 | 0.048" | 39/64" | Not Rated | 25 | 0000000 | 000000 |
| A | 9/64"-41.7 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 1 | 1:1 | 0.024" | 39/64" | Not Rated | 25 | 0000000 | 00000 |
| A | 7/32"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 1 | 1:1 | 0.048" | 39/64" | Not Rated | 25 | 0000000 | 00000 |
Acetal Plastic with Wear-Compensating Internal O-Ring | ||||||||||||||
| A | 9/64"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 1 | 1:1 | 0.048" | 39/64" | Not Rated | 5 | 0000000 | 00000 |
| A | 9/64"-41.7 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 1 | 1:1 | 0.024" | 39/64" | Not Rated | 5 | 0000000 | 00000 |
| A | 7/32"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 1 | 1:1 | 0.048" | 39/64" | Not Rated | 5 | 0000000 | 00000 |
Fast-Travel Ultra-Precision Lead Screws and Nuts
Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start. Operating with less backlash (play) than Precision Acme Lead Screws and Nuts, these lead screws and nuts provide increased nut life and more reliable movement in automated systems. All components are corrosion resistant for use in harsh environments. To ensure compatibility, select components that have the same thread size and number of thread starts.
Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
For technical drawings and 3-D models, click on a part number.
Flange nuts with wear-compensating internal O-ring or wear-compensating spring maintain a tight fit even when their threads begin to wear.
Flange | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Dia. | Wd. | Ht. | Thick. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Mounting Hole Ctr.-to-Ctr. | Tensile Strength, psi | Dynamic Thrust Load Cap., lbs. | Each | ||
Acetal Plastic | ||||||||||||||
| A | 9/64"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 2 | 2:1 | 0.096" | 39/64" | Not Rated | 25 | 0000000 | 000000 |
| A | 5/32"-21.3 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 2 | 2:1 | 0.094" | 39/64" | Not Rated | 25 | 0000000 | 00000 |
| A | 3/16"-42.7 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 16 | 16:1 | 0.375" | 39/64" | Not Rated | 25 | 0000000 | 00000 |
| A | 7/32"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 4 | 4:1 | 0.192" | 39/64" | Not Rated | 25 | 0000000 | 00000 |
Acetal Plastic with Wear-Compensating Internal O-Ring | ||||||||||||||
| A | 9/64"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 2 | 2:1 | 0.096" | 39/64" | Not Rated | 5 | 0000000 | 00000 |
| A | 5/32"-21.3 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 2 | 2:1 | 0.094" | 39/64" | Not Rated | 5 | 0000000 | 00000 |
| A | 3/16"-42.7 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 16 | 16:1 | 0.375" | 39/64" | Not Rated | 5 | 0000000 | 00000 |
| A | 7/32"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 4 | 4:1 | 0.192" | 39/64" | Not Rated | 5 | 0000000 | 00000 |