The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications. It maintains its corrosion resistance up to the maximum temperature.

If you don’t see the rod size you’re looking for, please specify a length under additional rod lengths.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength, such as fixture clamps, mounting plates, and spacers. This material can be surface hardened with heat treating.

Ground rods are decarb-free for a uniform surface that will consistently accept heat treating.

If you don't see the size you're looking for, please specify a length under additional rod lengths.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance. The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Ready for turning in your lathe, these rods are precision ground and held to a strict straightness tolerance. Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

If you don't see the size you're looking for, please specify a length under additional rod lengths.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Tungsten carbide, sometimes called carbide, is harder than Corrosion-Resistant Tungsten with excellent wear resistance. Use it to machine long-lasting tools, such as end mills and inserts.

For technical drawings and 3-D models, click on a part number.

Smooth, hard, and wear resistant, linear motion shafts work with linear bearings to reduce friction in manual and automated systems, such as those found in packing, machine tool, and material handling operations. The smooth surface reduces friction and wear on the bearing—the lower the microinch value a shaft has, the smoother its finish and the less friction it will create. All are turned, ground, and polished to tight diameter and straightness tolerances.

Steel shafts are generally stronger than aluminum and stainless steel shafts but not as corrosion resistant. 1055 and 1060 carbon steel shafts balance high strength and good machinability, making them ideal for general purpose use. 1566 carbon steel shafts have a higher yield strength than 1055 and 1060 carbon steel shafts for supporting heavier loads. 52100 alloy steel shafts are good for high-load applications. They are, however, more difficult to machine than carbon steel shafts.

Stainless steel shafts are more corrosion resistant than steel shafts; however, they’re not as hard as steel shafts and can be more difficult to machine. 420 stainless steel and 440C stainless steel shafts have good corrosion resistance. Shafts with chamfered edges have their edges ground to reduce damage to bearings, housings, and other components during installation.

Case-hardened shafts are hardened only on the surface of the shaft, which increases wear resistance while allowing the center to remain soft for absorbing stresses caused by shifting loads.

For technical drawings and 3-D models, click on a part number.

Mount these externally threaded shafts into tapped holes rather than using a shaft support, or attach a hex nut, shaft collar, or other threaded accessory. Smooth, hard, and wear resistant, linear motion shafts work with linear bearings to reduce friction in manual and automated systems, such as those found in packing, machine tool, and material handling operations. The smooth surface reduces friction and wear on the bearing—the lower the microinch value a shaft has, the smoother its finish and the less friction it will create. Shafts are case-hardened to increase hardness and wear resistance on the surface of the shaft while allowing the center to remain soft for absorbing stresses caused by shifting loads. The edges are chamfered to remove sharp corners, reducing damage to bearings, housings, and other components during installation. All are turned, ground, and polished to tight diameter and straightness tolerances.

For technical drawings and 3-D models, click on a part number.

Internal threads allow you to mount these shafts onto threaded studs and fasteners, no shaft supports needed. Smooth, hard, and wear resistant, linear motion shafts work with linear bearings to reduce friction in manual and automated systems, such as those found in packing, machine tool, and material handling operations. The smooth surface reduces friction and wear on the bearing—the lower the microinch value a shaft has, the smoother its finish and the less friction it will create. Shafts are case-hardened to increase hardness and wear resistance on the surface of the shaft while allowing the center to remain soft for absorbing stresses caused by shifting loads. The edges are chamfered to remove sharp corners, reducing damage to bearings, housings, and other components during installation. All are turned, ground, and polished to tight diameter and straightness tolerances.

52100 alloy steel shafts are good for high-load applications. They are, however, more difficult to machine than carbon steel shafts.

440C stainless steel shafts are more corrosion resistant than steel shafts but can be more difficult to machine.

For technical drawings and 3-D models, click on a part number.

Lighter than solid shafts, hollow shafts reduce your total system weight and allow you to run various media such as electrical wiring, compressed air tubing, coolants, or lubricants through the center. Smooth, hard, and wear resistant, linear motion shafts work with linear bearings to reduce friction in manual and automated systems, such as those found in packing, machine tool, and material handling operations. The smooth surface reduces friction and wear on the bearing—the lower the microinch value a shaft has, the smoother its finish and the less friction it will create. Shafts are case-hardened to increase hardness and wear resistance. Interior is unfinished; exterior is turned, ground, and polished to tight diameter and straightness tolerances. All are chamfered to remove sharp edges and reduce damage to bearings, housings, and other components during installation.

1055 carbon steel shafts balance high strength and good machinability, making them ideal for general purpose use. They're easier to machine than 52100 alloy steel shafts.

For technical drawings and 3-D models, click on a part number.

These shafts include a support rail for a stable setup that eliminates bending and prevents linear bearings from rotating. Shafts have a smooth surface to reduce friction and wear on linear bearings—the lower the microinch value a shaft has, the smoother its finish and the less friction it will create. They are case-hardened to increase hardness and wear resistance on the surface of the shaft while allowing the center to remain soft for absorbing stresses caused by shifting loads. The edges are chamfered to remove sharp corners, reducing damage to bearings, housings, and other components during installation. All are turned, ground, and polished to tight diameter and straightness tolerances.

Two-piece shafts allow you to replace the shaft when it becomes worn.

Carbon steel shafts are stronger than aluminum shafts but not as corrosion resistant. 1055 carbon steel shafts balance high strength and good machinability, making them ideal for general purpose use.

For technical drawings and 3-D models, click on a part number.

Combine these general purpose drive shafts with gears, sprockets, and bearings to transmit rotary motion. All are precision ground to meet tight diameter and straightness tolerances.

Steel shafts are generally stronger than stainless steel shafts but not as corrosion resistant. 1566 carbon steel shafts balance high strength and good machinability, making them ideal for general purpose use. Stainless steel shafts are more corrosion resistant than steel shafts but also more difficult to machine. 303 and 440C stainless steel shafts have good corrosion resistance. Shafts with chamfered edges have their edges ground to reduce damage to bearings, housings, and other components during installation.

For technical drawings and 3-D models, click on a part number.