System of Measurement System of Measurement |
|---|
|
Diameter Diameter | Show |
|---|
|
Diameter Diameter | Hide |
|---|
Shape Shape |
|---|
 |  |
| Coil | Rod and Disc |
Material Material |
|---|
|
Hardness Hardness |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (DefenseAcquisition Regulations Supplement)  |
|---|
Yield Strength Yield Strength |
|---|
|
For Joining For Joining |
|---|
|
|
Mechanical Finish Mechanical Finish |
|---|
|
End Type End Type |
|---|
 | Straight |
Appearance Appearance |
|---|
 | Plain |
Specifications Met Specifications Met |
|---|
|
Tolerance Rating Tolerance Rating |
|---|
|
Melting Temperature Melting Temperature |
|---|
|
Heat Treatment Heat Treatment |
|---|
|
Density Density |
|---|
|
About Shafts
More
About Copper, Brass, and Bronze
More
About Tool Steel
More
Hardened High-Speed M42 Tool Steel
- Yield Strength: Not Rated
- Hardness: Rockwell C65 (Very Hard)
Also known as cobalt steel, this M42 tool steel maintains its hardness in high-speed cutting applications that generate intense heat. Use it to make tools for cutting extremely hard materials.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Dia. | Dia. Tolerance | Lg. | Mechanical Finish | Each | |
| 3/64" | -0.0002" to 0" | 1 3/4" | Precision Ground | 0000000 | 00000 |
Ultra-Formable 260 Brass Rods
- Yield Strength:
Inch sizes: Not Rated
Metric sizes: 9,000 psi - Hardness: Not Rated
- Temper:
Inch sizes: H02 (1/2 Hard) to H03 (3/4 Hard)
Metric sizes: H01 (1/4 Hard) to H02 (1/2 Hard) - Heat Treatable: No
- Specifications Met: ASTM B134
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
For technical drawings and 3-D models, click on a part number.
1 ft. Lg. | ||||
|---|---|---|---|---|
| Dia. | Dia. Tolerance Range | Pkg. Qty. | Pkg. | |
| 3/64" | -0.002" to 0.002" | 4 | 00000000 | 00000 |
High-Temperature Ultra-Dense Tungsten Rods
- Maximum Temperature: 2,300° F
- Yield Strength: Not Rated
- Hardness: Rockwell C35 (Hard)
- Temper Rating: Not Rated
Ultra dense for use as electrodes, furnace support pillars, and screws and bolts, these chemically pure tungsten rods withstand greater heat than other high-temperature metal, such as molybdenum. You can also use them in applications where voltage increases may cause temperature spikes that other metal can’t handle. These rods won’t deform in high heat, so they last longer than other metal. However, they’re harder to machine than more ductile tungsten alloys. These rods won’t corrode from chemicals or weather.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Rotary Shafts
Combine these general purpose drive shafts with gears, sprockets, and bearings to transmit rotary motion. All are turned, ground, and polished to meet tight diameter and straightness tolerances.
Stainless steel shafts are more corrosion resistant than steel shafts but also more difficult to machine. 316 stainless steel shafts have excellent corrosion resistance.
| Lg. | Lg. Tolerance | Straightness Tolerance | Edge Type | Hardness Rating | Hardness | Yield Strength, psi | Each | |
Inch—316 Stainless Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
3/64" Dia. (Tolerance: -0.0002" to 0") | ||||||||
| 3" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Rockwell B83 | 42,000 | 0000000 | 00000 |
| 4" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Rockwell B83 | 42,000 | 0000000 | 0000 |
| 5" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Rockwell B83 | 42,000 | 0000000 | 0000 |
| 6" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Rockwell B83 | 42,000 | 0000000 | 0000 |
| 9" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Rockwell B83 | 42,000 | 0000000 | 00000 |
| 12" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Rockwell B83 | 42,000 | 0000000 | 00000 |
| 18" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Rockwell B83 | 42,000 | 0000000 | 00000 |
| 24" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Rockwell B83 | 42,000 | 0000000 | 00000 |
Linear Motion Shafts
Smooth, hard, and wear resistant, linear motion shafts work with linear bearings to reduce friction in manual and automated systems, such as those found in packing, machine tool, and material handling operations. The smooth surface reduces friction and wear on the bearing—the lower the microinch value a shaft has, the smoother its finish and the less friction it will create. All are turned, ground, and polished to tight diameter and straightness tolerances.
Stainless steel shafts are more corrosion resistant than steel shafts; however, they’re not as hard as steel shafts and can be more difficult to machine. 17-4 PH stainless steel shafts have excellent corrosion resistance and high yield strength to support heavy loads.
Hardened shafts are heat treated for increased wear resistance.
For technical drawings and 3-D models, click on a part number.
| Lg. | Lg. Tolerance | Straightness Tolerance | Surface Smoothness, microinch | Edge Type | Hardness Rating | Hardness | Heat Treatment | Yield Strength, psi | Each | |
3/64" Dia. (Tolerance: -0.0002" to 0") | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 2" | -0.01" to 0.01" | 0.0048" per ft. | 10 | Straight | Hard | Rockwell C40 | Hardened | 170,000 | 0000000 | 000000 |
| 3" | -0.01" to 0.01" | 0.0048" per ft. | 10 | Straight | Hard | Rockwell C40 | Hardened | 170,000 | 0000000 | 00000 |
| 4" | -0.01" to 0.01" | 0.0048" per ft. | 10 | Straight | Hard | Rockwell C40 | Hardened | 170,000 | 0000000 | 00000 |
| 5" | -0.01" to 0.01" | 0.0048" per ft. | 10 | Straight | Hard | Rockwell C40 | Hardened | 170,000 | 0000000 | 00000 |
| 6" | -0.01" to 0.01" | 0.0048" per ft. | 10 | Straight | Hard | Rockwell C40 | Hardened | 170,000 | 0000000 | 00000 |
| 12" | -0.01" to 0.01" | 0.0048" per ft. | 10 | Straight | Hard | Rockwell C40 | Hardened | 170,000 | 0000000 | 00000 |
| 18" | -0.01" to 0.01" | 0.0048" per ft. | 10 | Straight | Hard | Rockwell C40 | Hardened | 170,000 | 0000000 | 00000 |
| 24" | -0.01" to 0.01" | 0.0048" per ft. | 10 | Straight | Hard | Rockwell C40 | Hardened | 170,000 | 0000000 | 00000 |
Brazing Alloys without Cadmium
Use these alloys with most metals in general purpose applications.
Brazing Alloys with Cadmium
Use these alloys with most metals in general purpose applications.
Material Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Silver | Copper | Zinc | Cadmium | Melting Temperature Range, ° F | Braze Type | Dia. | Lg., ft. | Each | |
1.1 oz. | |||||||||
For Joining Brass, Bronze, Carbide, Cast Iron, Copper, Nickel Alloys, Stainless Steel, Steel | |||||||||
| 45% | 15% | 16% | 24% | 1125° to 1145° | Flux Required | 3/64" | 9 1/2 | 000000 | 000000 |
5 1/2 oz. | |||||||||
For Joining Brass, Bronze, Carbide, Cast Iron, Copper, Nickel Alloys, Stainless Steel, Steel | |||||||||
| 45% | 15% | 16% | 24% | 1125° to 1145° | Flux Required | 3/64" | 48 | 000000 | 000000 |
High-Strength Brazing Alloys without Cadmium
These alloys create stronger bonds than standard brazing alloys.
Material Composition | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Silver | Copper | Zinc | Tin | Cadmium | Melting Temperature Range, ° F | Braze Type | Dia. | Lg., ft. | Each | |
1.1 oz. | ||||||||||
For Joining Nickel Alloys, Stainless Steel | ||||||||||
| 56% | 22% | 17% | 5% | 0% | 1145° to 1205° | Flux Required | 3/64" | 9 1/2 | 00000000 | 000000 |
5 1/2 oz. | ||||||||||
For Joining Nickel Alloys, Stainless Steel | ||||||||||
| 56% | 22% | 17% | 5% | 0% | 1145° to 1205° | Flux Required | 3/64" | 48 | 00000000 | 000000 |
High-Strength Brazing Alloys with Cadmium
These alloys create stronger bonds than standard brazing alloys.
Material Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Silver | Copper | Zinc | Cadmium | Melting Temperature Range, ° F | Braze Type | Dia. | Lg., ft. | Each | |
1.1 oz. | |||||||||
For Joining Brass, Bronze, Carbide, Cast Iron, Copper, Nickel Alloys, Stainless Steel, Steel | |||||||||
| 50% | 15.5% | 16.5% | 18% | 1160° to 1175° | Flux Required | 3/64" | 9 1/2 | 000000 | 000000 |
5 1/2 oz. | |||||||||
For Joining Brass, Bronze, Carbide, Cast Iron, Copper, Nickel Alloys, Stainless Steel, Steel | |||||||||
| 50% | 15.5% | 16.5% | 18% | 1160° to 1175° | Flux Required | 3/64" | 48 | 000000 | 000000 |
Brazing Alloys for Furnace Brazing
Material Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Silver | Copper | Cadmium | Melting Temperature, °F | Braze Type | Dia. | Lg., ft. | Wt., oz. | Each | |
For Joining Brass, Bronze, Carbide, Cast Iron, Copper, Nickel Alloys, Stainless Steel, Steel | |||||||||
| 72% | 28% | 0% | 1435° | Flux Required | 3/64" | 9 | 1.1 | 0000000 | 000000 |
Brazing Alloys for Tight Gaps
When melted, these alloys form a thin liquid that easily flows into smaller gaps than standard brazing alloys.
Material Composition | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Silver | Copper | Zinc | Tin | Cadmium | Melting Temperature Range, °F | Braze Type | Dia. | Lg., ft. | Each | |
1.1 oz. | ||||||||||
For Joining Brass, Bronze, Carbide, Cast Iron, Copper, Nickel Alloys, Stainless Steel, Steel | ||||||||||
| 45% | 27% | 25% | 3% | 0% | 1185° to 1260° | Flux Required | 3/64" | 9 1/2 | 00000000 | 000000 |
5 1/2 oz. | ||||||||||
For Joining Brass, Bronze, Carbide, Cast Iron, Copper, Nickel Alloys, Stainless Steel, Steel | ||||||||||
| 45% | 27% | 25% | 3% | 0% | 1185° to 1260° | Flux Required | 3/64" | 48 | 00000000 | 000000 |
Corrosion-Resistant Brazing Alloys with Cadmium
Material Composition | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Silver | Copper | Zinc | Cadmium | Nickel | Melting Temperature Range, ° F | Braze Type | Dia. | Lg., ft. | Each | |
1.1 oz. | ||||||||||
For Joining Brass, Bronze, Carbide, Cast Iron, Copper, Nickel Alloys, Stainless Steel, Steel | ||||||||||
| 50% | 15.5% | 15.5% | 16% | 3% | 1170° to 1270° | Flux Required | 3/64" | 9 1/2 | 000000 | 000000 |
5 1/2 oz. | ||||||||||
For Joining Brass, Bronze, Carbide, Cast Iron, Copper, Nickel Alloys, Stainless Steel, Steel | ||||||||||
| 50% | 15.5% | 15.5% | 16% | 3% | 1170° to 1270° | Flux Required | 3/64" | 48 | 000000 | 000000 |
Corrosion-Resistant Brazing Alloys without Cadmium
Use these alloys for 300 series stainless steel.
Gap-Filling Brazing Alloys
These alloys melt into thicker liquid than standard brazing alloys, which allows them to fill larger gaps.
Material Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Silver | Copper | Zinc | Cadmium | Melting Temperature Range, ° F | Braze Type | Dia. | Lg., ft. | Each | |
1.1 oz. | |||||||||
For Joining Brass, Bronze, Carbide, Cast Iron, Copper, Nickel Alloys, Stainless Steel, Steel | |||||||||
| 35% | 26% | 21% | 18% | 1125° to 1295° | Flux Required | 3/64" | 9 1/2 | 000000 | 000000 |
5 1/2 oz. | |||||||||
For Joining Brass, Bronze, Carbide, Cast Iron, Copper, Nickel Alloys, Stainless Steel, Steel | |||||||||
| 35% | 26% | 21% | 18% | 1125° to 1295° | Flux Required | 3/64" | 48 | 000000 | 000000 |