About Plastic
More
Low-Carbon Steel Rods and Discs

- Yield Strength: See table
- Hardness: See table
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: See table
- Fabrication: See table
- Specifications Met: See table
Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into low-strength fasteners, pins, and axles. You can surface harden this material for added wear resistance. All have been manufactured to meet ASTM standards for quality and performance.
Cold-worked rods and discs have a finished look and quality. The cold-working process gives the steel consistent strength, hardness, and dimensions throughout.
Hot-rolled rods and discs are great for forming and fabricating. The steel undergoes less stress in the finishing process and has a little more give, so you can more easily bend and form it. It does however have a rougher surface finish than cold-worked steel.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
1/2 ft. Lg. | |||||||
---|---|---|---|---|---|---|---|
Dia. | Dia. Tolerance | Yield Strength, psi | Fabrication | Hardness | Max. Hardness After Heat Treatment | Specifications Met | |
6 1/2" | -0.006" to 0" | 54,000 | Cold Worked | Rockwell B70 (Medium) | Rockwell C60 | ASTM A108 | 00000000 |
Dia. | Dia. Tolerance | Yield Strength, psi | Fabrication | Hardness | Max. Hardness After Heat Treatment | Specifications Met | Pkg. Qty. | Pkg. | |
1/4" Lg. | |||||||||
---|---|---|---|---|---|---|---|---|---|
6 1/2" | -0.006" to 0" | 54,000 | Cold Worked | Rockwell B70 (Medium) | Rockwell C60 | ASTM A108 | 1 | 00000000 | 000000 |
1/2" Lg. | |||||||||
6 1/2" | 0" to 0.125" | Not Rated | Hot Rolled | Rockwell B65 (Medium) | Not Rated | ASTM A576 | 1 | 00000000 | 00000 |
3/4" Lg. | |||||||||
6 1/2" | -0.006" to 0" | 54,000 | Cold Worked | Rockwell B70 (Medium) | Rockwell C60 | ASTM A108 | 1 | 00000000 | 00000 |
1" Lg. | |||||||||
6 1/2" | 0" to 0.125" | Not Rated | Hot Rolled | Rockwell B65 (Medium) | Not Rated | ASTM A576 | 1 | 00000000 | 00000 |
1 1/2" Lg. | |||||||||
6 1/2" | -0.006" to 0" | 54,000 | Cold Worked | Rockwell B70 (Medium) | Rockwell C60 | ASTM A108 | 1 | 00000000 | 00000 |
2" Lg. | |||||||||
6 1/2" | -0.006" to 0" | 54,000 | Cold Worked | Rockwell B70 (Medium) | Rockwell C60 | ASTM A108 | 1 | 00000000 | 000000 |
3" Lg. | |||||||||
6 1/2" | 0" to 0.125" | Not Rated | Hot Rolled | Rockwell B65 (Medium) | Not Rated | ASTM A576 | 1 | 00000000 | 000000 |
Multipurpose 4140 Alloy Steel Rods and Discs

Also known as chrome-moly steel, this versatile alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress. For added wear resistance, the surface can be hardened with heat treating. These rods and discs have been manufactured to meet ASTM standards for quality and performance.
Note: Rods and discs may be made from either 4140 or 4142 alloy steel. They are interchangeable in most applications.
Hot-rolled steel rods have lower yield strength than cold-worked rods, so they’re easier to shape. They have a rougher surface finish than cold-worked rods, so they are good for applications where you need additional processing.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 60,000 psi
- Hardness: Rockwell C10 (Medium)
- Heat Treatable: Yes
- Maximum Hardness After Heat Treatment: Not Rated
- Fabrication: See table
- Specifications Met: See table
1 ft. Lg. | |||||
---|---|---|---|---|---|
Dia. | Dia. Tolerance | Fabrication | Heat Treatment | Specifications Met | |
6 1/2" | 0" to 0.125" | Hot Rolled | Annealed (Softened) | ASTM A322 | 00000000 |
Oversized Easy-to-Machine Gray Cast Iron Rods and Discs

- Yield Strength: Not Rated
- Hardness: Rockwell C20 (Hard)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C50
- Specifications Met: ASTM A247
An oversized diameter allows for finishing to your exact requirements. Gray cast iron machines faster with less wear on cutting tools than most types of steel. It also absorbs vibration, so finished parts run quieter than those made of steel. It's often used for gears, pulleys, rollers, and bushings.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Impact-Resistant Ductile Cast Iron Rods and Discs

- Yield Strength: 55,000 psi
- Hardness: Rockwell C20 (Hard)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C60
- Specifications Met: ASTM A536
Ductile cast iron is strong, resilient, and able to handle repeated stress without breaking. It also absorbs vibration, so finished parts run quieter than those made of steel.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Oversized Multipurpose Air-Hardening A2 Tool Steel Rods and Discs

- Yield Strength: 55,000 psi
- Hardness: Rockwell B95 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C64
- Fabrication: See table
- Specifications Met: ASTM A681
With an oversized diameter, these rods and discs let you finish to your exact requirements. Made of A2 steel, they are more wear resistant than O1 rods and discs. They also keep a sharper cutting edge. When heat treated for added wear resistance, they don’t require baths or quenching and can be air-hardened. A2 tool steel is widely used for punches, blades, and hammers. These rods and discs are decarb-free, which means any surface flaws created during the manufacturing process have been removed. This makes them more machinable and leads to better results from heat treating or finishing. All have been manufactured to meet ASTM A681 standards for quality and performance.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
To order: Please specify length in increments of 0.25” within the range listed.
Dia. | Dia. Tolerance | Fabrication | Mechanical Finish | Straightness Tolerance | Choose a Length | Per Inch | |
6 1/2" | 0.02" to 0.093" | Hot Rolled | Turned | Not Rated | 13" to 90" in 0.25" increments | 000000 | 000000 |
Oversized Shock-Resistant S7 Tool Steel Rods and Discs

- Yield Strength: 50,000 psi
- Hardness: Rockwell B90 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C55
- Specifications Met: ASTM A681
An oversized diameter allows for finishing to your exact requirements. Often made into chisels, rivets, and punches, S7 tool steel can handle repeated impact without fracturing. It is an air-hardening material. These rods and discs are decarb-free for a uniform surface that will consistently accept heat treating.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
To Order: Please specify length in increments of 0.25" within the range listed.
Dia. | Dia. Tolerance | Heat Treatment | Mechanical Finish | Straightness Tolerance | Choose a Length | Per Inch | |
6 1/2" | 0.093" to 0.14" | Annealed (Softened) | Turned | Not Rated | 13"-90" | 0000000 | 000000 |
Oversized Wear-Resistant D2 Tool Steel Rods and Discs

- Yield Strength: 50,000 psi
- Hardness: Rockwell B95 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C62
- Specifications Met: ASTM A681
An oversized diameter allows for finishing to your exact requirements. The addition of nickel gives D2 tool steel better wear resistance than A2. This air-hardening material is often used for cutting blades, stamps, and forming dies. These rods and discs are decarb-free for a uniform surface that will consistently accept heat treating.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
To Order: Please specify length in increments of 0.25" within the range listed.
Dia. | Dia. Tolerance | Heat Treatment | Mechanical Finish | Straightness Tolerance | Choose a Length | Per Inch | |
6 1/2" | 0.010" to 0.093" | Annealed (Softened) | Ground | 1/8" per 5 ft. | 13"-90" | 0000000 | 000000 |
Multipurpose 6061 Aluminum Rods and Discs

- Yield Strength: 35,000 psi
- Hardness:
Foot and inch sizes: Brinell 95 (Soft)
Metric sizes: Brinell 80 (Soft) - Temper: See table
- Fabrication: See table
- Specifications Met:
Cold Worked: ASTM B211
Extruded: ASTM B221
Cold Rolled: ASTM B209
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
To Order: Please specify length in increments of 0.25" within the range listed.
Dia. | Dia. Tolerance | Fabrication | Temper | Heat Treatment | Temperature Range, °F | Choose a Length | Per Inch | |
6 1/2" | -0.044" to 0.044" | Extruded | T6511 | Hardened | -320° to 300° | 13"-90" | 0000000 | 000000 |
Wear-Resistant Easy-to-Machine Delrin® Acetal Resin Rods and Discs


Because these naturally slippery, wear-resistant rods and discs resist expanding when exposed to heat and moisture, they can be easily machined to close tolerances. They are a good choice for parts that require precision, such as gears, bushings, and bearings. Delrin® acetal resin is also known as acetal homopolymer; it is stronger and stiffer than acetal copolymer.
- Color: White or Black
- Temperature Range: -20° to 180° F
- Tensile Strength: 10,000-11,000 psi (Good)
- Impact Strength: 1-1.5 ft.-lbs./in (Poor)
- Hardness: Rockwell R120-R122 (Hard)
- For Use Outdoors: No
- Specifications Met: See table
Wear-Resistant Easy-to-Machine Acetal Rods and Discs


- Color: White or Black
- Temperature Range: -20° to 180° F
- Tensile Strength: 9,135-9,700 psi (Good)
- Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R120 (Hard)
- For Use Outdoors: No
- Specifications Met: FDA Compliant 21 CFR 176.170, FDA Compliant 21 CFR 177.2470, UL 94 HB
Made of naturally slippery acetal copolymer, these rods and discs are an economical alternative to Delrin® acetal resin. They offer similar wear resistance and are equally resistant to expanding when exposed to heat and moisture. They can be machined to close tolerances and are often used to make precision gears, bushing, bearings, and rollers.
MDS-Filled Easy-to-Machine Wear-Resistant Cast Nylon Rods and Discs

- Color: Black
- Max. Temperature: 230° F
- Tensile Strength: 10,000 psi (Good)
- Impact Strength: 1.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110 (Hard)
- For Use Outdoors: Yes
- Specifications Met: ASTM D5989
An MDS additive provides exceptional wear resistance as well as a self-lubricating surface. Made of cast nylon 6, they’re easier to machine than other MDS-filled nylon rods and discs, plus they are better electrical insulators. Use them to fabricate gears, sprockets, wear strips, and other high-friction parts. This material is comparable to Nylatron and Nycast.
Slippery UHMW Polyethylene Rods and Discs

- Color: White
- Temperature Range: -40° to 180° F
- Tensile Strength: 4,350-5,800 psi (Poor)
- Impact Strength: 16.8 ft.-lbs./in. (Excellent)
- Hardness: Durometer 65D-67D (Medium)
- For Use Outdoors: No
Offering a low-friction surface that prevents sticking and binding, these rods and discs are often machined into bushings and bearings. UHMW is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.
Borosilicate Glass Rods and Discs
- Color: Clear
- Max. Temperature: 445° F
- Fabrication: Annealed
Also called Pyrex and Schott glass, this glass resists clouding and pitting and is highly chemical and heat resistant. With a low rate of thermal expansion, it stays dimensionally stable during changes in temperature.
Also Available: Other disc sizes. Please select 8477K98 and specify the diameter and length.