These rods are zinc galvanized for good corrosion resistance.

A chrome plating on these rods increases their corrosion resistance. They're also hardened, which makes them more resistant to impacts and abrasion.

Also known as chrome-moly steel, this versatile alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress.

Made from 4130 alloy steel, also known as chrome-moly steel, these rods have low carbon content for good weldability. They’re often used to make gears and bushings.

Easier to machine than 52100 alloy steel rods, these extremely hard and wear-resistant tubes are often used to create bearings, bushings, and other cylindrical parts that are under constant stress. They’re also known as chrome steel.

A modified version of 4340 alloy steel, this 300M alloy steel combines high yield strength with extreme resistance to cracking. It’s often used to create parts that require both, such as torsion bars and drive shafts.

Made of a chromium-nickel-molybdenum alloy and strengthened with vanadium, this steel is the strongest alloy we offer.

Often used for gears, bushings, and pins, this 4820 alloy steel resists wear from friction and abrasion.

Ready for turning in a lathe, these precision-ground rods have a tight diameter tolerance and are held to a strict straightness tolerance.

Made from powdered metal, M4 tool steel has a consistent microstructure that gives it outstanding resistance to wear and abrasion. It is comparable to CPM Rex M4.

With an oversized diameter, these rods and discs let you finish to your exact requirements.

The diameter on these rods is precision ground while the straightness is held to a strict tolerance, so they're ready for turning in a lathe.

All set for turning in your lathe, these precision-ground rods are held to a strict straightness tolerance.

An oversized diameter allows for finishing to your exact requirements.

An oversized diameter on these rods allows for finishing to your exact requirements.

Resistant to wear, abrasion, and chipping, A11 is a hard material that is often made into punches and stamping tools.

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel.

13-8 PH stainless steel can be hardened at lower temperatures than other heat-treatable types of stainless steel. It is widely used for fittings, pins, and lock washers.

One of the hardest types of stainless steel after heat treating, 440C offers excellent wear and abrasion resistance. It's often used for bearings, valves, and knife blades.

The titanium content of 321 stainless steel preserves corrosion resistance around weld points.