Selecting Clamps Using Pipe, Conduit, or Tubing Trade Size
More
Threaded-Rod-Mount Roller Loop Hangers
A roller on the bottom of these hangers compensates for movement due to expansion and contraction, such as in hydraulic applications. Combine with a threaded rod or other fastener to hang from the ceiling. To mount, slide threaded rod into the unthreaded hole on top of the hanger and secure with a nut (sold separately).
For technical drawings and 3-D models, click on a part number.
ID | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | For Pipe Size | For Thread Size | Roller Material | Cap., lbs. | Lg. | Wd. | Ht. | Thick. | Mounting Hole Dia. | Each | |
Steel | ||||||||||||
2 3/8" | 60 | 2 | 3/8"-16 | Cast Iron | 150 | 4" | 1 1/4" | 4 3/4" | 3/16" | 7/16" | 0000000 | 000000 |
2 7/8" | 73 | 2 1/2 | 1/2"-13 | Cast Iron | 220 | 4 15/16" | 1 1/4" | 6" | 3/16" | 9/16" | 0000000 | 00000 |
3 1/2" | 89 | 3 | 1/2"-13 | Cast Iron | 310 | 5 9/16" | 1 1/4" | 6 5/8" | 3/16" | 9/16" | 0000000 | 00000 |
4" | 102 | 3 1/2 | 1/2"-13 | Cast Iron | 390 | 6 1/16" | 1 1/4" | 7 1/4" | 9/32" | 9/16" | 0000000 | 00000 |
4 1/2" | 114 | 4 | 5/8"-11 | Cast Iron | 470 | 6 3/4" | 1 1/2" | 7 7/8" | 9/32" | 11/16" | 0000000 | 00000 |
5 9/16" | 141 | 5 | 5/8"-11 | Cast Iron | 680 | 8 1/2" | 1 3/4" | 9 3/16" | 13/32" | 11/16" | 0000000 | 00000 |
6 5/8" | 168 | 6 | 3/4"-10 | Cast Iron | 780 | 9 3/4" | 2" | 10 3/8" | 13/32" | 13/16" | 0000000 | 00000 |
8 5/8" | 219 | 8 | 3/4"-10 | Cast Iron | 780 | 12" | 2 1/2" | 12 5/8" | 13/32" | 13/16" | 0000000 | 000000 |
10 3/4" | 273 | 10 | 7/8"-9 | Cast Iron | 960 | 14 1/4" | 2 1/2" | 14 15/16" | 13/32" | 15/16" | 0000000 | 000000 |
12 3/4" | 324 | 12 | 7/8"-9 | Cast Iron | 1,200 | 16 3/4" | 2 1/2" | 17 3/8" | 17/32" | 15/16" | 0000000 | 000000 |
14" | 356 | 14 | 1"-8 | Cast Iron | 1,200 | 18 1/4" | 2 1/2" | 19" | 17/32" | 1 1/8" | 0000000 | 000000 |
16" | 406 | 16 | 1"-8 | Cast Iron | 1,200 | 20 1/2" | 2 1/2" | 20 3/4" | 17/32" | 1 1/8" | 0000000 | 000000 |
Roller Supports
Support lines that expand and contract. The roller on these supports compensates for movement in your line from changing temperatures. Often used outdoors, these supports are galvanized steel to resist corrosion in wet environments. Bolt them to the floor, beams, or brackets. They can also be welded into place.
For technical drawings and 3-D models, click on a part number.
For OD | Mounting Hole | Thread | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | For Pipe Size | Cap., lbs. | Lg. | Wd. | Ht. | Roller Material | Ctr.-to-Ctr. | No. of (Dia.) | Mounting Hardware Included | Size | Lg. | Temp. Range, °F | Each | |
Galvanized Steel | |||||||||||||||
2 1/2" | 64 | 2 | 600 | 4 1/4" | 1 1/4" | 1 1/2" | Galvanized Cast Iron | 1 1/4" | 2 (3/8") | Yes | 3/8"-16 | 1 1/2" | -20° to 400° | 0000000 | 000000 |
3 5/8" | 92 | 3 | 700 | 5 3/4" | 1 1/4" | 1 3/4" | Galvanized Cast Iron | 2" | 2 (3/8") | Yes | 3/8"-16 | 1 1/2" | -20° to 400° | 0000000 | 00000 |
4 5/8" | 117 | 4 | 750 | 6 11/16" | 1 1/2" | 2 5/16" | Galvanized Cast Iron | 2" | 2 (1/2") | Yes | 1/2"-13 | 1 1/2" | -20° to 400° | 0000000 | 00000 |
6 3/4" | 171 | 6 | 1,070 | 9 7/8" | 2" | 2 3/4" | Galvanized Cast Iron | 3 1/8" | 2 (1/2") | Yes | 1/2"-13 | 1 1/2" | -20° to 400° | 0000000 | 00000 |
8 3/4" | 222 | 8 | 1,350 | 12 1/8" | 2" | 3" | Galvanized Cast Iron | 3 3/8" | 2 (5/8") | Yes | 5/8"-11 | 1 1/2" | -20° to 400° | 0000000 | 000000 |
11" | 279 | 10 | 1,730 | 14 3/8" | 2" | 3 5/8" | Galvanized Cast Iron | 5 1/4" | 2 (5/8") | Yes | 5/8"-11 | 2" | -20° to 400° | 0000000 | 000000 |
12 7/8" | 327 | 12 | 2,400 | 16 1/2" | 2" | 4 1/8" | Galvanized Cast Iron | 5 1/2" | 2 (5/8") | Yes | 5/8"-11 | 2" | -20° to 400° | 0000000 | 000000 |
14 1/4" | 362 | 14 | 3,130 | 18 1/4" | 2 1/2" | 4 11/16" | Galvanized Cast Iron | 6 1/2" | 2 (3/4") | Yes | 3/4"-10 | 2" | -20° to 400° | 0000000 | 000000 |
16 1/4" | 413 | 16 | 3,970 | 20 1/2" | 3" | 5 3/8" | Galvanized Cast Iron | 8 1/4" | 2 (3/4") | Yes | 3/4"-10 | 2 1/2" | -20° to 400° | 0000000 | 000000 |
Roller Track for Doors
Combine track, mounting brackets, and hangers that fit the same inside track width to create a system for hanging doors. Some components that fit together are rated for different capacities; the capacity of your system is determined by the component with the lowest capacity.
Hangers with bolts attach through the top of your door. They adjust vertically within the bolt's thread length. Two per door are required. The horizontally adjustable hanger allows you to adjust the clearance between your door and wall by 3/4". The offset hanger has a 1/2" offset to provide clearance between your door and wall.
Hangers with mounting plate attach around the sides and top of your door. They adjust vertically between the bottom of the track and the top of the door. Two per door are required.
For technical drawings and 3-D models, click on a part number.
Inside | 6 ft. | 8 ft. | 10 ft. | |||||||
---|---|---|---|---|---|---|---|---|---|---|
Track Capacity, lbs. | Wd. | Ht. | Thick. | Color | Each | Each | Each | |||
Powder-Coated Steel | ||||||||||
400 | 1 3/4" | 2 1/4" | 0.06" | Beige | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
600 | 2 1/4" | 3 1/4" | 0.08" | Beige | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
800 | 2 5/8" | 3 1/4" | 0.09" | Beige | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
1,000 | 2 5/8" | 3 1/4" | 0.14" | Beige | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
5,000 | 2 13/16" | 3 3/16" | 0.15" | Beige | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
Galvanized Steel | ||||||||||
400 | 1 3/4" | 2 1/4" | 0.06" | __ | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
600 | 2 1/4" | 3 1/4" | 0.08" | __ | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
304 Stainless Steel | ||||||||||
400 | 1 3/4" | 2 1/4" | 0.06" | __ | 000000 | 000000 | 000000 | 000000 | 0000000 | 000000 |
600 | 2 1/4" | 3 1/4" | 0.08" | __ | 000000 | 000000 | 000000 | 000000 | 0000000 | 000000 |
316 Stainless Steel | ||||||||||
300 | 1 3/8" | 1 1/2" | 0.06" | __ | 00000000 | 000000 | 00000000 | 000000 | 000000 | 00 |
Rollers | Bearing | Thread | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Capacity per Pair, lbs. | For Inside Track Wd. | Ht. | Max. Vertical Adjustment | No. of | Dia. | Type | Material | Size | Lg. | Mounting Fasteners Included | |
Zinc-Plated Steel | |||||||||||
300 | 1 3/4" | 5 1/8" | 3 1/16" | 2 | 2 1/16" | Ball | Steel | 1/2"-13 | 3 1/16" | Yes | 0000000 |
300 | 1 3/4" | 6 5/16" | 3 1/16" | 1 | 2 1/16" | Ball | Steel | 1/2"-13 | 3 1/16" | Yes | 0000000 |
400 | 1 3/4" | 4 1/4" | 1 3/8" | 2 | 2 1/8" | Roller | Steel | 1/2"-13 | 2 1/8" | Yes | 0000000 |
400 | 1 3/4" | 5 1/2" | 2 3/4" | 2 | 2 1/8" | Roller | Steel | 1/2"-13 | 3 3/8" | Yes | 0000000 |
400 | 1 3/4" | 6 1/2" | 3 3/4" | 2 | 2 1/8" | Roller | Steel | 1/2"-13 | 4 3/8" | Yes | 0000000 |
600 | 2 1/4" | 6 5/8" | 3 1/8" | 2 | 3" | Roller | Steel | 3/4"-10 | 3 1/8" | Yes | 0000000 |
800 | 2 5/8" | 6 5/8" | 3 1/8" | 2 | 3" | Roller | Steel | 3/4"-10 | 3 1/8" | Yes | 0000000 |
Zinc-Plated Iron | |||||||||||
600 | 2 1/4" | 7 1/8" | 3 5/8" | 2 | 3" | Ball | Steel | 5/8"-11 | 3 5/8" | Yes | 0000000 |
800 | 2 5/8" | 6 5/8" | 3 1/8" | 2 | 2 3/4" | Ball | Steel | 3/4"-10 | 3 1/8" | Yes | 0000000 |
1,000 | 2 5/8" | 7" | 3 9/16" | 2 | 3" | Ball | Steel | 5/8"-11 | 3 9/16" | Yes | 0000000 |
304 Stainless Steel | |||||||||||
300 | 1 3/8" | 3 3/8" | 1 7/16" | 2 | 1 1/2" | Roller | 304 Stainless Steel | M10 | 1 7/16" | Yes | 00000000 |
400 | 1 3/4" | 4 13/16" | 2 3/16" | 2 | 2 1/8" | Ball | 304 Stainless Steel | 1/2"-13 | 2 3/16" | Yes | 000000 |
600 | 2" | 5 5/8" | 3 1/4" | 2 | 2" | Roller | 304 Stainless Steel | M16 | 3 1/4" | Yes | 00000000 |
600 | 2 1/4" | 6 5/8" | 3 1/4" | 2 | 3" | Ball | 304 Stainless Steel | 1/2"-13 | 3 1/4" | Yes | 000000 |
Iron | |||||||||||
2,500 | 2 13/16" | 10 7/8" | 4 1/2" | 2 | 3" | Ball | Steel | 7/8"-9 | 4 1/2" | Yes | 0000000 |
5,000 | 2 13/16" | 14 15/16" | 4 3/4" | 4 | 3" | Ball | Steel | 1"-8 | 4 3/4" | Yes | 0000000 |
Rollers | Bearing | Thread | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Capacity per Pair, lbs. | For Inside Track Wd. | Ht. | Max. Vertical Adjustment | No. of | Dia. | Type | Material | Size | Lg. | Mounting Fasteners Included | |
Zinc-Plated Steel | |||||||||||
400 | 1 3/4" | 11 5/8" | 7 5/8" | 2 | 2 1/16" | Ball | Steel | 1/2"-13 | 7 5/8" | Yes | 0000000 |
Rollers | Bearing | Thread | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Capacity per Pair, lbs. | For Inside Track Wd. | Ht. | Max. Vertical Adjustment | No. of | Dia. | Type | Material | Size | Lg. | Mounting Fasteners Included | |
Zinc-Plated Steel | |||||||||||
400 | 1 3/4" | 11 7/8" | 7" | 2 | 2 1/8" | Roller | Steel | 1/2"-13 | 7" | Yes | 0000000 |
Vertical Adjustment | Rollers | Bearing | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity per Pair, lbs. | For Inside Track Wd. | For Door Thick. | Ht. | Mounting Plate Ht. | Min. | Max. | No. of | Dia. | Type | Material | Color | Mounting Fasteners Included | |
Powder-Coated Steel | |||||||||||||
800 | 2 5/8" | 1 3/4"-2 1/4" | 14 5/16" | 7 11/16" | 1 1/4" | 2 1/2" | 2 | 3" | Roller | Steel | Beige | Yes | 0000000 |
800 | 2 5/8" | 2 1/4"-3" | 14 5/16" | 7 11/16" | 1 1/4" | 2 1/2" | 2 | 3" | Roller | Steel | Beige | Yes | 0000000 |
Zinc-Plated Steel | |||||||||||||
400 | 1 3/4" | 1 1/2"-2 1/4" | 11 1/16" | 6" | 1 1/4" | 2 1/2" | 2 | 2 1/8" | Roller | Steel | __ | Yes | 0000000 |
400 | 1 3/4" | 1 3/4"-2 3/8" | 12 13/16" | 5 13/16" | 1 1/4" | 2 1/2" | 2 | 2" | Ball | Steel | __ | Yes | 0000000 |
600 | 2 1/4" | 1 3/4"-2 1/4" | 14 5/16" | 7 11/16" | 1 1/4" | 2 1/2" | 2 | 3" | Roller | Steel | __ | Yes | 0000000 |
600 | 2 1/4" | 1 3/4"-2 3/4" | 14 3/8" | 7 1/4" | 1 1/4" | 2 1/2" | 2 | 3" | Ball | Steel | __ | Yes | 0000000 |
600 | 2 1/4" | 2 1/4"-2 3/4" | 14 5/16" | 7 11/16" | 1 1/4" | 2 1/2" | 2 | 3" | Roller | Steel | __ | Yes | 0000000 |
1,000 | 2 5/8" | 2 3/8"-3 5/8" | 15 3/4" | 9 1/4" | 1 1/4" | 2 1/2" | 2 | 3" | Ball | Steel | __ | Yes | 0000000 |
304 Stainless Steel | |||||||||||||
300 | 1 3/8" | 1 3/4"-2 1/4" | 10 1/2" | 6 1/2" | __ | __ | 2 | 1 1/2" | Roller | 304 Stainless Steel | __ | Yes | 00000000 |
400 | 1 3/4" | 1 1/2"-2 1/4" | 10 13/16" | 6" | 1 1/4" | 2 1/2" | 2 | 2 1/8" | Ball | 304 Stainless Steel | __ | Yes | 000000 |
600 | 2" | 1 3/4"-2 1/4" | 12 11/16" | 6 1/2" | __ | __ | 2 | 2" | Roller | 304 Stainless Steel | __ | Yes | 00000000 |
600 | 2 1/4" | 1 3/4"-2 1/4" | 12 11/16" | 6 1/16" | 1 1/4" | 2 1/2" | 2 | 3" | Ball | 304 Stainless Steel | __ | Yes | 000000 |
600 | 2 1/4" | 2 1/4"-2 3/4" | 12 11/16" | 6 1/16" | 1 1/4" | 2 1/2" | 2 | 3" | Ball | 304 Stainless Steel | __ | Yes | 000000 |
Iron | |||||||||||||
2,500 | 2 13/16" | 2 1/4"-3 3/4" | 23 1/8" | 12 1/4" | 4 1/2" | 6 1/2" | 2 | 3" | Ball | Steel | __ | Yes | 0000000 |
Low-Profile Roller Track for Doors
Narrow track allows you to hang doors in tight spaces. Combine track and hangers to create a system.
Track comes with mounting brackets attached.
Two hangers per door are required.
For technical drawings and 3-D models, click on a part number.
Inside | Bracket | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | Track Capacity, lbs. | Wd. | Ht. | Projection | Material | Spacing Ctr.-to-Ctr. | Ht. | Material | Mounting Fasteners Included | Mounting Hole Dia. | Each | |
6 | 150 | 7/16" | 2 1/4" | 1 3/16" | Galvanized Steel | 24" | 4" | Zinc-Plated Steel | No | 3/8" | 00000000 | 0000000 |
8 | 150 | 7/16" | 2 1/4" | 1 3/16" | Galvanized Steel | 30 3/16" | 4" | Zinc-Plated Steel | No | 3/8" | 00000000 | 000000 |
10 | 150 | 7/16" | 2 1/4" | 1 3/16" | Galvanized Steel | 38 7/8" | 4" | Zinc-Plated Steel | No | 3/8" | 00000000 | 000000 |
Rollers | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Capacity per Pair, lbs. | For Max. Door Thick. | Ht. | Mounting Plate Ht. | Material | No. of | Dia. | Material | Mounting Fasteners Included | Each | |
150 | 1 3/4" | 5 1/2" | 3" | Zinc-Plated Steel | 2 | 2 1/8" | Plastic | Yes | 00000000 | 000000 |
Dust-Resistant Roller Track for Doors
Round track eliminates edges where dust and debris can accumulate. Combine track, hangers, and accessories to create a system for hanging doors.
Track comes with mounting brackets attached.
Hangers with bolts attach through the top of your door. They adjust vertically within the bolt's thread length. Two per door are required.
Hangers with mounting plate attach around the sides and top of your door. They adjust vertically between the bottom of the track and the top of the door. Two per door are required.
For technical drawings and 3-D models, click on a part number.
Vertical Adjustment | Rollers | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity per Pair, lbs. | For Door Thick. | Ht. | Mounting Plate Ht. | Min. | Max. | No. of | Dia. | Material | Bearing Type | Mounting Fasteners Included | Pair | |
600 | 1 1/2"-2 3/8" | 10" | 4 7/16" | 1 3/4" | 3 1/4" | 2 | 2" | Plastic | Ball | Yes | 0000000 | 000000 |
Curved Roller Track for Doors, Curtains, and Strip Doors
Curved and straight track pieces allow you to create a wide variety of layouts for doors, curtains, and strip doors. Combine track, mounting brackets, and hangers that fit the same inside track width to create a system. Some components that fit together are rated for different capacities; the capacity of your system is determined by the component with the lowest capacity.
Hangers with eyebolt and hook are for use on curtains and strip doors. Two hangers per curtain or strip door are required. Hangers with hook connect to holes in curtains and strip doors. Hangers with eyebolts connect to curtains and strip doors using S-hooks (not included).
Hangers with bolt are for use on doors. All have a vertical adjustment to adjust the distance between the bottom of the track and the top of the door. Two hangers per door are required. Hangers with bolt attach through the top of your door.
Pull trolley bolts onto the leading edge of a curtain or strip door and has a pull cord.
For technical drawings and 3-D models, click on a part number.
Inside | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Track Radius, ft. | Wd. | Ht. | Thick. | Material | Color | Mounting Fasteners Included | Mounting Hole Dia. | Each | |
100-lb. Track Capacity | ||||||||||
90° Curve | ||||||||||
3' 2" | 2 | 1 3/8" | 1 1/8" | 0.06" | Galvanized Steel | __ | No | 3/8" | 0000000 | 0000000 |
Straight | ||||||||||
8' | __ | 1 3/8" | 1 1/8" | 0.06" | Galvanized Steel | __ | No | 3/8" | 0000000 | 00000 |
10' | __ | 1 3/8" | 1 1/8" | 0.06" | Galvanized Steel | __ | No | 3/8" | 0000000 | 00000 |
600-lb. Track Capacity | ||||||||||
90° Curve | ||||||||||
3' 2" | 2 | 1 3/4" | 2 5/16" | 0.19" | Powder-Coated Steel | Beige | No | 9/16" | 0000000 | 000000 |
4' 9" | 3 | 1 3/4" | 2 5/16" | 0.19" | Powder-Coated Steel | Beige | No | 9/16" | 0000000 | 000000 |
6' 3" | 4 | 1 3/4" | 2 5/16" | 0.19" | Powder-Coated Steel | Beige | No | 9/16" | 0000000 | 000000 |
Straight | ||||||||||
10' | __ | 1 3/4" | 2 5/16" | 0.19" | Powder-Coated Steel | Beige | No | __ | 0000000 | 000000 |
Bearing | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Hanger Capacity, lbs. | For Inside Track Wd. | Ht. | Material | Roller Dia. | Type | Material | Eyebolt ID | Mounting Fasteners Included | Each | |
For 600-lb. Track Capacity | ||||||||||
75 | 1 3/4" | 3" | Zinc-Plated Steel | 2 1/8" | Roller | Plastic | 1/4" | No | 000000 | 000000 |
225 | 1 3/4" | 6" | Zinc-Plated Steel | 2 1/8" | Roller | Steel | 1" | No | 000000 | 00000 |
300 | 1 3/4" | 6" | Zinc-Plated Steel | 2 1/16" | Ball | Steel | 1 1/4" | No | 0000000 | 00000 |
Bearing | Thread | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Hanger Capacity per Pair, lbs. | For Inside Track Wd. | Ht. | Max. Vertical Adjustment | Material | Roller Dia. | Type | Material | Size | Lg. | Mounting Fasteners Included | Each | |
For 600-lb. Track Capacity | ||||||||||||
300 | 1 3/4" | 5 3/8" | 2 3/4" | Steel | 2 1/8" | Roller | Steel | 1/2"-13 | 2 3/4" | Yes | 0000000 | 000000 |
600 | 1 3/4" | 6 13/16" | 3 1/2" | Steel | 2 1/8" | Ball | Steel | 5/8"-11 | 3 1/2" | Yes | 0000000 | 000000 |
For Inside Track Wd. | Ht. | Material | Roller Dia. | Pull Cord Lg., ft. | Mounting Fasteners Included | Each | |
For 100-lb. Track Capacity | |||||||
---|---|---|---|---|---|---|---|
1 3/8" | 2 5/8" | Galvanized Steel | 1 1/16" | 4 | Yes | 0000000 | 000000 |
Track Rollers
Use these rollers as replacements on an existing door hanger or as the starting point for a customized hanger. They have a hole so you can add a bolt or a mounting plate (not included) to attach a door. Capacity is based on using 2 track rollers. Track rollers are sold individually.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
---|---|---|---|---|---|---|---|
Capacity per Pair, lbs. | For Inside Track Wd. | Dia. | Wd. | Material | Bolt Hole Dia. | Each | |
400 | 1 3/4" | 2 1/8" | 1 5/8" | Zinc-Plated Steel | 1/2" | 00000000 | 000000 |
Corrosion-Resistant I-Beam Roller Track for Doors and Curtains
Built to withstand corrosive marine environments, track is anodized aluminum and hangers are 316 stainless steel. Combine track and hangers to create a system for hanging doors and curtains. Some components that fit together are rated for different capacities; the capacity of your system is determined by the component with the lowest capacity.
Track mounts using bolts (sold separately). Nine bolts are required for every 3 ft. of track. For extra stability, mount an additional track to the floor as a guide.
Clevis-pin hanger has three clevis pins to hold doors and curtains up to 1/2" thick. Hanger can be used individually as well as in pairs.
Mounting-loop hanger has a loop with a 1/4" dia. opening to attach doors and curtains with carabiners, S-hooks, and shackles (not included). Hanger can be used individually as well as in pairs.
For technical drawings and 3-D models, click on a part number.
Lg. | Wd. | Ht. | Material | Color | Each | |
550-lb. Capacity | ||||||
---|---|---|---|---|---|---|
3' 3" | 3/4" | 15/16" | Anodized Aluminum | Black | 00000000 | 000000 |
6' 7" | 3/4" | 15/16" | Anodized Aluminum | Black | 00000000 | 000000 |
9' 10" | 3/4" | 15/16" | Anodized Aluminum | Black | 00000000 | 000000 |
1,400-lb. Capacity | ||||||
3' 3" | 1 1/4" | 1 1/4" | Anodized Aluminum | Black | 00000000 | 00000 |
6' 7" | 1 1/4" | 1 1/4" | Anodized Aluminum | Black | 00000000 | 000000 |
9' 10" | 1 1/4" | 1 1/4" | Anodized Aluminum | Black | 00000000 | 000000 |
For Max. Door Thick. | Wd. | Ht. | Material | Each | |
For 550-lb. Track Capacity | |||||
---|---|---|---|---|---|
1/2" | 3/4" | 15/16" | 316 Stainless Steel | 0000000 | 0000000 |
Wd. | Ht. | Loop Opening | Material | Each | |
For 1,400-lb. Track Capacity | |||||
---|---|---|---|---|---|
1 1/4" | 1 1/4" | 1/4" | 316 Stainless Steel | 0000000 | 0000000 |
Roller Track Sets for Bypassing Cabinet Doors
For smoother operation than standard track sets, these sets include upper and lower roller track. Use them to hang lightweight cabinet doors that slide past each other. To mount, use nails or glue track in place. Height of cabinet door should not exceed twice its width.
For technical drawings and 3-D models, click on a part number.
Upper Track | Lower Track | ||||||
---|---|---|---|---|---|---|---|
For Door Thick. | Ht. | Wd. | Ht. | Wd. | Mounting Fasteners Included | Each | |
3 ft. | |||||||
Zinc-Plated Steel—for Glass Doors | |||||||
1/4" | 5/8" | 15/16" | 1" | 1" | No | 000000 | 000000 |
4 ft. | |||||||
Zinc-Plated Steel—for Glass Doors | |||||||
1/4" | 5/8" | 15/16" | 1" | 1" | No | 000000 | 000000 |
5 ft. | |||||||
Zinc-Plated Steel—for Glass Doors | |||||||
1/4" | 5/8" | 15/16" | 1" | 1" | No | 000000 | 000000 |
6 ft. | |||||||
Zinc-Plated Steel—for Glass Doors | |||||||
1/4" | 5/8" | 15/16" | 1" | 1" | No | 000000 | 000000 |