The smallest snap-acting switches we offer, these fit into the tiniest of spaces. They open and close circuits quickly to minimize arcing and prevent contacts from sticking. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

For technical drawings and 3-D models, click on a part number.

Actuate these switches with a fraction of the force of other subminiature switches for increased accuracy. Among the smallest snap-acting switches we offer, they fit into the tiniest of spaces. To minimize arcing and prevent contacts from sticking, they open and close circuits quickly. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

For technical drawings and 3-D models, click on a part number.

Enclosures protect these snap-acting switches from the environment. They open and close circuits quickly to minimize arcing and prevent contacts from sticking.

For technical drawings and 3-D models, click on a part number.

With a rubber-encased housing and stainless steel bracket, these switches resist vibration and corrosion. They’re rated IP68 for protection from dust and temporary submersion. To minimize arcing and prevent contacts from sticking, they open and close circuits quickly. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

For technical drawings and 3-D models, click on a part number.

Small enough to fit in the tiniest spaces, these switches are rated IP67 for protection from temporary submersion. They open and close circuits quickly to minimize arcing and prevent contacts from sticking. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

For technical drawings and 3-D models, click on a part number.

Rated NEMA 4 and IP66, these enclosed switches have a sealed actuator for protection from washdowns. They open and close circuits quickly to minimize arcing and prevent contacts from sticking.

For technical drawings and 3-D models, click on a part number.

Keep out dirt and moisture—the sealed housing on these switches is watertight and meet MIL-PRF-8805. They’re sized to fit in the tiniest of spaces. To minimize arcing and prevent contacts from sticking, they open and close circuits quickly. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

For technical drawings and 3-D models, click on a part number.

A simple automation solution that requires no programming, these valves are activated when an object, such as a box rolling on a conveyor, pushes the actuator. Also known as 3-way and 3/2 valves, they create one action, such as extending a cylinder. Valves direct airflow from the inlet to your equipment and exhaust return airflow to create motion. They're normally closed to normally block airflow, and remain closed until actuated. Return actuation is by spring, so they go back to their starting position as soon as the actuator is released. In the off position, they exhaust air pressure from the system, allowing equipment to reset so the action can be repeated.

Valves with a one-direction actuator are activated by objects from one side.

Valves with a two-direction actuator are activated by objects from both sides.

Flow coefficient (Cv) is a measurement that indicates how much airflow can pass through a valve. When selecting between valves with the same port size, choose the valve with the higher flow coefficient to ensure it provides enough airflow to operate your system.

For technical drawings and 3-D models, click on a part number.